In Reply to: Re: Evo airbox install?? posted by Robert Obando on March 05, 2001 at 21:49:43:
Just screw the airhorn onto the plastic panel from the front. Then replace the panel, apply the foam "doughnut," and reinstall the airbox.
You will need to take the bumper cover off. Once it is off you can see where the air horn should go, fairly straight forward... BTW the bumper cover is only held by 2 19mm nuts, you need to gently pry 2 plastic covers off to get to the 19mm nuts... good luck.
Does anyone have directions on how to install the "horn" piece that comes with the evo airbox. Does it bolt/screw up to anything. Thanks