In Reply to: MEATHEAD QUESTIONS posted by Dave Clark on August 13, 2001 at 07:34:32:
As you noted, the front splitter is smooth on one side and has a slight raised bit on the other. If you look closely you will see that the raised bit is at a bit of an angle. This side is the bottom for all positions except position 4. In position 4 (fully extended), this is the top, and effectively lowers the front of the splitter due to the built-in angle.
Perhaps Brandon might publish a page from the owner's maunual which addresses this question.
An interesting bit in the owner's manual is the listing of the only "legal" spoiler/splitter combinations...
Hoping someone can help me with a few questions. First, vaccuum questions, From the fuel regulator to ? Then from the brake booster hose(looks like a check valve) to? The only possible locations are both between the intakes 2-3 but which one is which? Next, the gererator had a external ground that secured to the steel water line under the intake, where did the ground secure to on the generator? Seems like anywhere would be OK, but I need to be sure. Last one, The adjustable EVO3 front spoiler has one side that has a raised portion and the other side is flat, which way does it bolt up? I have mine with the flat side up toward the bumper. Don't want to get pulled over by the M POLICE and get laughed off the road. Thanks for any help!