The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Stock setup. No power to the lo's on hi! (archive)

[ Follow Ups ] [ E30 M3 Message Board ] [ Msg. Board FAQ ]

Posted by Erik Brannfors - Seattle on August 31, 2001 at 10:23:33:

In Reply to: I believe... posted by Jeff J. on August 31, 2001 at 10:15:02:

OK, This can't be so hard. The low beam bulbs are 9006, single intensity, 2 wire pigtail connector bulbs. The brown wire from the pigtail is plugged into the brown ground wire in the wiring harness plug. There is a yellow/white wire from the pigtail that is plugged into the yellow/white wire of the harness plug. However, in the harness plug, there is a white/violet wire that comes from the hi beam harness plug that is supposed to supply power to the lo beam light when the hi beams are turned on. However, there is no physical connection between the white/violet wire and the lo beam light bulb itself - on my car...

A picture of the plug from a working system would explain so much!

Follow Ups:

[ Follow Ups ] [ E30 M3 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk. Logo © 1997 - 2018 Jump Internet Inc. All rights reserved.