In Reply to: Stock setup. No power to the lo's on hi! posted by Erik Brannfors - Seattle on August 31, 2001 at 10:23:33:
A picture of the plug from a working system would explain so much!
white/violet- + wire to left high beam
yellow/white- + wire to left low beam
yellow/blue- + wire to right low beam
white/blue- + wire to right high beam
all the brown wire are gound
here's more from your high beam indicator
white/violet wire is connected to fuse#1
from fuse #1 the white?violet is connected to your LH high beam.
yellow /whire wire from your left hand high beam is connected to fuse#13, yellow /blue wire to your RH low beam is connected to Fuse#14 and last
the White/blue wire is connected to fuse#2
this should be enought for you to trace all the wire. I look at how my car works low beam 2 lights
are ON high beam all four lights should be ON.
The fog works only with the low beam and turns off as you swich to high beam.