In Reply to: Re: Help would be appreciated! posted by John Arnold on September 07, 2001 at 19:39:46:
Ok I am putting together the kit car, (my other car is in the body shop so I don't have a model to go by) and I have a few extra hoses and I can't find any diagrams on the Koala CD, Chiltons or Bentley (obviously)manuals, so here it goes...Under the power steering resivor there is the carbon container..a hose comes off this and into some type of valve and then a hose comes off of that, where do I connect this hose? (pictures in the link to see what I am trying to figure out) and finally where does the vacuum line off the fuel pressure regulator (at the end of the fuel rail) connect to? I am assuming it connects to the vacuum line that comes off the hose connected to the volume air sensor if not where does this line go!!(picture also in the album!)
The vacuum hose from the fuel pressure reg. goes to the small port on the idle valve hose (top one) just before it attaches to the intake manifold. It`s attached with a small plastic elbow. It`s about 3" to the right of the base idle screw, viewed from the passenger side.