bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 00

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 00
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

Brembo cross-drilled rotors at WHOLESALE prices (url) (pic) - Gino 22:59 1/06/2002 (1)
- Eurasian in cali has better prices than these. - Basil'90M3 06:00 1/07/2002 (0)
Ordering parts form Denmark (url) - Jason 22:29 1/06/2002 (1)
- Re: Ordering parts form Denmark (url) - m3 16:00 1/07/2002 (0)
FS: (2x) E30 M3 factory CATs - jimmy p 21:13 1/06/2002 (1)
- Re: FS: (2x) E30 M3 factory CATs - MinWei Lin 13:50 1/07/2002 (0)
wanna trade my silver for your red - Damian 21:07 1/06/2002 (0)
Uk Meet - Paul D 18:46 1/06/2002 (5)
- Re: Uk Meet - Roops 07:28 1/08/2002 (1)
  - Re: Uk Meet - DarranP 16:49 1/08/2002 (0)
- Re: Uk Meet - DarranP 16:59 1/07/2002 (1)
  - Re: Uk Meet - GilesL 05:51 1/08/2002 (0)
- Re: Uk Meet - GilesL 05:24 1/07/2002 (0)
ride height - Age P 17:44 1/06/2002 (7)
- Re: ride height - C///MR 01:25 1/07/2002 (1)
  - Re: ride height Thanks ! - Age P 02:13 1/07/2002 (0)
- Re: ride height - Gordon Monsen 20:36 1/06/2002 (2)
  - Different wheel or tire size will change the...... - John A 08:54 1/07/2002 (1)
    - Re: Different wheel or tire size will change the.. - roger j 11:08 1/07/2002 (0)
- Re: ride height (url) - MarkPike 18:30 1/06/2002 (1)
  - Re: ride height - Roops 07:34 1/08/2002 (0)
Will these fit?????? (pic) - Tony 16:24 1/06/2002 (10)
- How's this pic... (pic) - Cosmic 00:47 1/07/2002 (4)
  - And, yes, its photoshopped. - Cosmic 02:14 1/07/2002 (3)
    - Car belongs to Rob Servidio, local Toronto M nut! (nt) - KevinS 07:32 1/07/2002 (2)
      - Thanks, I hope Rob doesn't mind. - Cosmic 16:45 1/07/2002 (1)
        
        Re: Thanks, I hope Rob doesn't mind. - Rob89m3 19:54 1/07/2002 (0)
- Re: Photoshop Gurus........ (pic) - Tony 20:21 1/06/2002 (0)
- Re: Will these fit?????? - Tony 16:25 1/06/2002 (3)
  - Re: Will these fit?????? (url) (pic) - KevinS 16:56 1/06/2002 (2)
    - Re: Will these fit?????? (url) (pic) - SALD 20:11 1/06/2002 (1)
      - Re: Will these fit?????? (url) (pic) - KevinS 07:38 1/07/2002 (0)
A word about buying my M3 - Victor Hall 15:19 1/06/2002 (0)
Accident update - Victor Hall 15:15 1/06/2002 (8)
- So you're near DC I guess? - Jeff E 09:06 1/07/2002 (1)
  - Yes, I'm a TERP. - Victor Hall 10:03 1/07/2002 (0)
- did you buy the one with the e36 m3 wheels? - mirth 19:23 1/06/2002 (1)
  - yes! - Victor Hall 19:24 1/06/2002 (0)
- Appraisal - Lee 18:39 1/06/2002 (1)
  - Re: Appraisal - Victor Hall 19:20 1/06/2002 (0)
- you have mail (nt) - JDM3 15:31 1/06/2002 (1)
  - Re: you have mail - the other May 12:17 1/07/2002 (0)
LA Auto Show Pics (url) - Cosmic 14:41 1/06/2002 (9)
- Sorry about pics, just fixed em. (url) - Cosmic 18:07 1/06/2002 (0)
- How was the LA Auto Show,hopefully better then DC? - LV (OO=[][]=OO) 14:50 1/06/2002 (7)
  - Re: How was the LA Auto Show,hopefully better then (pic) - Cosmic 15:12 1/06/2002 (6)
    - I'm jealous,DC autoshow needs 2 take notes from LA (nt) - LV (OO=[][]=OO) 11:33 1/07/2002 (5)
      - I see Lambroghinis copyin' Contour style rim now:) - LV (OO=[][]=OO) 12:13 1/07/2002 (4)
        
        I believe, that was a Mitsubishi concept SUV. - Cosmic 17:17 1/07/2002 (3)
        
        I saw this phat GT40 @ the Autoshow 2002 web site (url) (pic) (nt) - LV (OO=[][]=OO) 19:20 1/07/2002 (2)
        
        What's meant by "the reissue of the GT40"??? - Doug 09:49 1/08/2002 (1)
        
        Nah,it's the 1st I heard of the reissue of the car - some! LV (OO=[][]=OO) 11:41 1/08/2002 (0)
Vic Hall e-mail me UR Address & #,I'll B around:) - LV (OO=[][]=OO) 14:24 1/06/2002 (1)
- Damn U fast on the e-mail Vic & I read track also! - LV (OO=[][]=OO) 14:45 1/06/2002 (0)
PaulD - DarranP 13:18 1/06/2002 (1)
- Re: PaulD - Paul D 18:33 1/06/2002 (0)
EVO III Intake........... - Tony 12:21 1/06/2002 (2)
- Re: EVO III Intake........... - Mike 17:09 1/06/2002 (1)
  - Re: EVO III Intake. Call Maximillian - AC 20:54 1/06/2002 (0)
Light and Cheap wheels - recommendations sought - Paul Barham 10:06 1/06/2002 (3)
- Re: (url) - SPAM 15:05 1/06/2002 (1)
  - oops sorry wrong name ;-) (nt) - MarkPike 15:07 1/06/2002 (0)
- Kosei K1 - 15x7 - 15x8 - 16x8 - Lee 11:14 1/06/2002 (0)
WTB:BMW sparkplug tool only, hook a Bimmer guy up. (nt) - LV (OO=[][]=OO) 06:03 1/06/2002 (2)
- Re: WTB:BMW sparkplug tool $45 Snap On or $4 11/16 - AC 12:20 1/06/2002 (1)
  - Re: Also pick up a $8 O2 sensor socket - AC 12:31 1/06/2002 (0)
BMW For Sale (url) (pic) (nt) - Ern 03:02 1/06/2002 (1)
- Don't Follow the Link...SPAM, SPAM, SPAM, (nt) - SPAM 06:13 1/06/2002 (0)
WTB E30 M3 parts - Dan 22:43 1/05/2002 (0)
goodies on ebay (url) (pic) - frank 21:50 1/05/2002 (0)
sorry forgot to add the photos (url) (pic) - jeff 21:33 1/05/2002 (0)
steering wheels for sale - jeff 21:32 1/05/2002 (1)
- Check your Mail! - Mike 01:42 1/06/2002 (0)
Break Lining light goes on & off - M3andM3 21:30 1/05/2002 (8)
- Re: Break Lining light goes on & off - m3lachssilber 10:48 1/07/2002 (1)
  - Read my post below its a bad solder joint - David 87M3 11:05 1/07/2002 (0)
- if the sensors don't do it then...... - GilesL 05:47 1/07/2002 (0)
- Bad solder joints - David 87M3 04:55 1/07/2002 (0)
- replace both sensors ... - C///MR 11:28 1/06/2002 (0)
- Re: Break Lining light goes on & off - MarkPike 22:48 1/05/2002 (0)
- Re: Break Lining light goes on & off - Damian 21:33 1/05/2002 (1)
  - Lik Mark says check 4 short in sensor wire or just - LV (OO=[][]=OO) 06:56 1/06/2002 (0)
ERIC: what model Remus muff. did you use?? - Sev '88 21:11 1/05/2002 (2)
- it's acutally off a v-dub golf! - -Eric 21:01 1/06/2002 (0)
- remus makes mostly universal mufflers. e36 prob.. - adam p 22:23 1/05/2002 (0)
white E30 - N Demand 20:48 1/05/2002 (2)
- Re: white E30 - Gordon Monsen 13:46 1/06/2002 (0)
- http://www.bimmers.com/m3/index.html - Anthony 88 ///M3 21:04 1/05/2002 (0)
Anyone have E30 M3 LSD for sale? - Alvin Caragay '72 02 19:51 1/05/2002 (3)
- Don't buy LSD in here - too many FEDs ;^) - B. Wheaton 23:01 1/05/2002 (2)
  - Heh.... (nt) - Alvin Caragay '72 02 09:11 1/06/2002 (1)
    - No officer that's not LSD,it's my go fast vitamins (nt) - LV (OO=[][]=OO) 11:40 1/07/2002 (0)
M3 Stuff for sale. - e30 V8 17:48 1/05/2002 (1)
- Re: M3 Stuff for sale. - Thomas 02:25 1/13/2002 (0)
need help off the bimmer subject: - suspicious 17:39 1/05/2002 (4)
- thanks guys. heres how.... - suspicious 16:22 1/06/2002 (0)
- Here is another excellent link (url) (nt) - Jeff W 15:05 1/06/2002 (0)
- Let me ask you something... - Jon 19:00 1/05/2002 (0)
- First, protect yourself (more) (url) - michael 18:06 1/05/2002 (0)
web site - Jeff 14:52 1/05/2002 (0)
Where can i get a momo steering wheel? "cheap" (nt) - Mike///M 12:06 1/05/2002 (3)
- Re:You can get this one for.... (pic) - Markus 08:20 1/06/2002 (0)
- I have momo runner,brand new for $200 - rich 18:45 1/05/2002 (0)
- Re: momo steering wheel? "cheap" $200 - Rui 18:00 1/05/2002 (0)
speedo inacurate - rob 08:50 1/05/2002 (2)
- try two, with ALL the text! - michael 17:58 1/05/2002 (0)
- Re: speedo inacurate and more... - michael 17:43 1/05/2002 (0)
Break Rotor Condition Question (pic) - Rich 00:57 1/05/2002 (3)
- They warp if you have them cut, get new ones! (nt) - michael 17:32 1/05/2002 (0)
- Addendum: the minimum thickness is stamped........ - John A 01:32 1/05/2002 (0)
- Re: Break Rotor Condition Question - John A 01:26 1/05/2002 (0)
Bay Area! This Sunday!!! (pic) (nt) - jay 00:54 1/05/2002 (0)
WTB Front Bilstein Shocks - Phil 00:49 1/05/2002 (1)
- you have mail - Victor Hall 09:21 1/05/2002 (0)
polyurethane sway bar bushings - Rich 23:45 1/04/2002 (0)
Awesome exhaust Eric - B. Wheaton 23:21 1/04/2002 (1)
- Congratulations... (more) (pic) - Jon 00:47 1/05/2002 (0)
Evo III intake...... (pic) - Tony 20:49 1/04/2002 (2)
- Bought the whole air box from dealer with Evo3 bot - adrian 21:27 1/04/2002 (0)
- Re: Evo III intake...... (url) (pic) - Jon 21:04 1/04/2002 (0)
Evo III intake...... (nt) - Tony 20:48 1/04/2002 (0)
Lots of questions.......... - Tony 20:26 1/04/2002 (1)
- Re: Lots of questions.......... - John A 23:15 1/04/2002 (0)
Parts for sale.. - adam p 20:15 1/04/2002 (0)
E30 M3 speedo/odo/OBC woe - Richard (DC) 19:52 1/04/2002 (1)
- The OBC gets its speed information from the ...... - John A 23:22 1/04/2002 (0)
Ron Man! - Johan - Sweden 19:11 1/04/2002 (0)
UK guys - Classic&sportscar - DarranP 18:18 1/04/2002 (4)
- Re: UK guys - Classic&sportscar - Gordon Monsen 18:33 1/05/2002 (0)
- Re: UK guys - Classic&sportscar - Paul D 11:22 1/05/2002 (1)
  - Re: UK guys - Classic&sportscar - DarranP 16:59 1/05/2002 (0)
- Re: UK guys - Classic&sportscar - simon mac 10:33 1/05/2002 (0)
Need help ASAP,I'm leakin' anti-freeze from 1 of:) - LV (xx=[][]=xO) 17:04 1/04/2002 (2)
- part numbers (url) - MarkPike 17:43 1/04/2002 (1)
  - Thx,U guys. Lik Tony the Tiger says UR Grrreeat! (nt) - LV (xx=[][]=xO) 07:12 1/05/2002 (0)
EVO 2 front splitter part number??? - ADA///M 16:40 1/04/2002 (1)
- 51-71-2-238-178 (nt) - MarkPike 17:44 1/04/2002 (0)
Tool for exhaust nut tightening? - JPL 15:38 1/04/2002 (11)
- Re: Tool for exhaust nut tightening? - paul 22:03 1/06/2002 (0)
- sometimes a stock nut has been replaced by - al 00:22 1/05/2002 (0)
- Re: Tool for exhaust nut tightening? - Gustave 17:48 1/04/2002 (1)
  - Thats what i tried to say below.. - adam p 17:54 1/04/2002 (0)
- are you talking about at the header/cylinder area? - Doug 17:40 1/04/2002 (0)
- i recall it being a 10mm.. or maybe an 8mm.. - adam p 16:38 1/04/2002 (5)
  - nuts are 7mm, use a 9mm wrench. (nt) - MarkPike 17:45 1/04/2002 (3)
    - ETK says M6. Why 9mm wrench??? (more) - Jon 18:04 1/04/2002 (2)
      - The studs are M6x1, the nuts are 9mm hex, no 7mm.. - John A 20:04 1/04/2002 (1)
        
        Oh, of course! Thanks. (nt) - Jon 21:05 1/04/2002 (0)
  - ahh and, i used a thin wall wrench and worked good - adam p 16:39 1/04/2002 (0)
NYC / LI area gathering Saturday Lunch & Cruise - Ari 15:29 1/04/2002 (0)
I need some help!!!! - Gerald Williams 15:25 1/04/2002 (3)
- Regulator? Pull it out and check the brushes...... - John A 15:56 1/04/2002 (0)
- Re: I need some help!!!! - Jon 15:37 1/04/2002 (0)
- used one here: (url) (nt) - Jeff E 15:31 1/04/2002 (0)
Help - Foglight question - JPL 14:53 1/04/2002 (1)
- Yes! Plastic does get brittle with age - Mike 14:59 1/04/2002 (0)
Alignment settings - JLA 10:09 1/04/2002 (2)
- On the track... - michael 10:52 1/04/2002 (0)
- Re: Alignment settings - C///MR 10:46 1/04/2002 (0)
Rear spoiler for sale - Adrian P 08:59 1/04/2002 (0)
All my wires are breaking! Do you guys have - Jeff E. 08:54 1/04/2002 (12)
- Get some Thermotec heat blanket onto your headers. - Stan 13:41 1/04/2002 (6)
  - Re: Get some Thermotec heat blanket onto your head - paul 22:15 1/06/2002 (0)
  - I don't quite understand... - Jon 14:40 1/04/2002 (4)
    - Re: I don't quite understand... - Stan 17:58 1/04/2002 (2)
      - Cast iron, no prob. Stainless Steel... - michael 17:27 1/05/2002 (1)
        
        Yeahbut.. - Stan 21:13 1/06/2002 (0)
    - Beware, the hotter the pipe, the shorter the life. (nt) - michael 15:56 1/04/2002 (0)
- Re: All my wires are breaking! Do you guys have - David 87M3 11:50 1/04/2002 (0)
- Heat and time - Lee 10:53 1/04/2002 (0)
- My 3 wire plug from the thermistat let go. (nt) - michael 09:10 1/04/2002 (2)
  - Yup mine too. (nt) - Jack 09:19 1/04/2002 (1)
    - Re: Yup mine too. - roger j 22:49 1/04/2002 (0)
Power Steering fluid question - Mike 06:37 1/04/2002 (1)
- Re: Power Steering fluid question - Randy 19:05 1/04/2002 (0)
B-Wheaton, pics of my Remus exhaust finally (pic) - Eric 05:40 1/04/2002 (2)
- Nice pipes (pic) - Damian 19:58 1/04/2002 (0)
- where did u get the exhaust? - m325ix/88m3 07:51 1/04/2002 (0)
New pics of my M3 at Yosemite and more! (url) (pic) - Eric 05:37 1/04/2002 (5)
- Re: New pics of my M3 at Yosemite and more! (pic) - Damian 20:07 1/04/2002 (0)
- Re: New pics of my M3 at Yosemite and more! (pic) - Barry Robinson 13:22 1/04/2002 (1)
  - Re: New pics of my M3 at Yosemite and more! (pic) - -Eric 14:35 1/04/2002 (0)
- great looking car...... - ritter 11:29 1/04/2002 (1)
  - they are actually Sumitomo HTRZ II - -Eric 12:56 1/04/2002 (0)
Wanted: Center console and shift boot for e30 m3.. - Jim 01:07 1/04/2002 (1)
- Re: Wanted: Center console and shift boot for e30 (url) - m3 16:15 1/07/2002 (0)
What Have You Guys Paid To Get Base Idle/ CO Set, (pic) - D///M3 23:59 1/03/2002 (3)
- who are you going to get to do your work? (nt) - michael 16:07 1/04/2002 (1)
  - Sears Auto Center ------> Why? (pic) - D///M3 20:46 1/04/2002 (0)
- About 2 hrs of labor - Mike 13:49 1/04/2002 (0)
Anyone have Rear Ashtray (Black) for SALE? TIA (nt) - MKM3 21:24 1/03/2002 (2)
- i have one. md/dc/va area - Victor Hall 02:39 1/04/2002 (1)
  - Our(MD)secondary sucked,but what's up w/the emblem - LV (OO=[][]=OO) 12:38 1/04/2002 (0)
Problems with Central Locking System - '88 2.5L 19:02 1/03/2002 (4)
- Re: Problems with Central Locking System - JLA 21:12 1/03/2002 (2)
  - Re: Problems with Central Locking System - roger j 05:05 1/04/2002 (0)
  - Good articles - '88 2.5L 21:43 1/03/2002 (0)
- I had that happen... - michael 19:07 1/03/2002 (0)
Vibration and Growl in Rear - MaximuM3 18:53 1/03/2002 (6)
- Re: Vibration and Growl in Rear - Jonathan 21:38 1/08/2002 (1)
  - Re: Vibration and Growl in Rear - MaximuM3 22:21 1/08/2002 (0)
- Re: Vibration and Growl in Rear - Jeff 14:22 1/05/2002 (0)
- CV joint or friction plaits in diff? (nt) - michael 09:16 1/04/2002 (0)
- Re: Vibration and Growl in Rear - m3lachsilber 00:16 1/04/2002 (1)
  - Same here..... - Chip 03:23 1/04/2002 (0)
ADRESS M GmbH????????????? - DANIEL SOSPEDRA 18:40 1/03/2002 (0)
ADRESS M GmbH??????? - DANIEL SOSPEDRA 18:33 1/03/2002 (1)
- You need to make more sense ? - Neil M 04:19 1/04/2002 (0)
Evo Wing on EBAY.... I'm Not related (url) (nt) - ///M-Cubed 18:12 1/03/2002 (1)
- That's for non-M3 E30's...made by Zender (eom) - Barry Robinson 21:45 1/03/2002 (0)
BMW Pictures/Information Help - Chris Adams 17:38 1/03/2002 (2)
- Re: BMW Pictures/Information Help - m3 16:17 1/07/2002 (0)
- Re: BMW Pictures - MarkPike 17:41 1/03/2002 (0)
How to reach Mobile Tradition in Germany? - Lee 17:25 1/03/2002 (0)
Does anyone have a number to contact Pete McHenry? (nt) - Ryan 17:24 1/03/2002 (1)
- 336-761-0643 (nt) - MarkPike 17:43 1/03/2002 (0)
Does anyone have a number to contace Pete McHenry? (nt) - Ryan 17:24 1/03/2002 (1)
- here it goes - Lee 17:47 1/03/2002 (0)
BMW Car Sept 2001 Issue needed!!!! - Ron ///Man 14:58 1/03/2002 (4)
- Re: BMW Car Sept 2001 Issue needed!!!! - Rob89m3 20:04 1/07/2002 (0)
- I have a brand new copy of ur article.. n plastic. - adam p 21:58 1/03/2002 (0)
- yeah what up? - mel 16:40 1/03/2002 (0)
- I wonder who that dude might be? 8^) (url) (pic) - KevinS 16:37 1/03/2002 (0)
Need 10 spoke E36 rim for 97 m3>>Where to look ?? (nt) - E PIECE 14:55 1/03/2002 (3)
- Just One? I have a set I'd consider selling..(m) - Doug 15:25 1/03/2002 (2)
  - Re doug - Rui 18:12 1/03/2002 (1)
    - $800.00 plus S/H (includes tires)...they are (m) - Doug 10:06 1/04/2002 (0)
Paul D - UK owners - DarranP 14:37 1/03/2002 (7)
- Re: Paul D - UK owners - Radar 04:06 1/04/2002 (6)
  - Re: Paul D - UK owners - Roops 04:21 1/04/2002 (5)
    - Re: Paul D - UK owners (url) - Neil M 04:29 1/04/2002 (4)
      - Re: Paul D - UK owners - Roops 08:21 1/04/2002 (3)
        
        Re: Paul D - UK owners - Paul D 07:44 1/05/2002 (2)
        
        Re: Paul D - UK owners - simon mac 10:37 1/05/2002 (1)
        
        Re: Paul D - UK owners - DarranP 11:23 1/05/2002 (0)
Throtle mistery, help needed. - michael 14:19 1/03/2002 (9)
- mass air flow , check it - adrian 00:14 1/04/2002 (2)
  - explain please, why MAF? (nt) - michael 08:44 1/04/2002 (0)
  - explain please (nt) - michael 08:37 1/04/2002 (0)
- Re: Throtle mistery, help needed. - roger j 00:13 1/04/2002 (1)
  - I'll verify the setup. (nt) - michael 08:59 1/04/2002 (0)
- Any other ideas? - michael 19:04 1/03/2002 (0)
- Shot in the dark, but maybe new fuel pump and main - Jeff E 15:07 1/03/2002 (2)
  - Actually, sorry, just saw that you get it to work - Jeff E 15:09 1/03/2002 (1)
    - thanks (nt) - michael 15:12 1/03/2002 (0)
///M3 Owners in Massachusetts - MinWei 12:19 1/03/2002 (5)
- Natick E30 M3 owner here! (e) - Jim 00:24 1/04/2002 (0)
- Re: ///M3 Owners in Massachusetts - Roy 14:35 1/03/2002 (0)
- Re: ///M3 Owners in Massachusetts - Roy 14:24 1/03/2002 (0)
- Milton, 1 town over from you. I met you on the - EricH 14:05 1/03/2002 (1)
  - Re: Milton, 1 town over from you. I met you on the - MinWei Lin 16:26 1/07/2002 (0)
///M3 Owners in Massachusetts - MinWei 12:01 1/03/2002 (1)
- '90-E30/M3 (Acton, MA) - Jonathan 13:17 1/03/2002 (0)
Anybody know Zygmund's web address? (nt) - Ryan 10:59 1/03/2002 (5)
- Isn't it Zygmonts? (nt) - Magnus 13:21 1/03/2002 (4)
  - U stand corrected! :) - leo 14:19 1/03/2002 (0)
  - Or is it Zygmunt? (eom) - Barry Robinson 13:56 1/03/2002 (2)
    - Re: Or is it Zygmunt? (eom) - Greg K 15:17 1/03/2002 (1)
      - Note: Take stars out of web address... - Greg K 15:19 1/03/2002 (0)
Battery Tender for Winter Storage - Jonathan 10:12 1/03/2002 (0)
Clutch question - David 87M3 09:09 1/03/2002 (4)
- Yup, Rubber man! - Mike 12:11 1/03/2002 (2)
  - Would it be worth it to remove the driver's seat? - Jon 13:11 1/03/2002 (1)
    - That will make it easer... - michael 14:11 1/03/2002 (0)
- Flexable back needed for master! "U" joint nice. (nt) - michael 09:34 1/03/2002 (0)
Pistons std. or oversize?? - Mike 08:13 1/03/2002 (9)
- Re: Pistons std. or oversize?? - Ron ///Man 10:10 1/09/2002 (0)
- Re: Pistons std. or oversize?? - Adrian P 09:54 1/03/2002 (7)
  - Re: Pistons std. or oversize?? - Mike 15:31 1/03/2002 (6)
    - Re: Pistons std. or oversize?? - Adrian P 07:25 1/04/2002 (5)
      - Re: Pistons std. or oversize?? - Gustave 12:57 1/04/2002 (4)
        
        Gustave: you're right stock pistons are cast. EOM - Ron ///Man 10:15 1/09/2002 (0)
        
        What is the clearance for Stock M3s ?? - Mike 14:57 1/04/2002 (0)
        
        Thanks Gustave! -- More Questions - Mike 14:56 1/04/2002 (1)
        
        Re: Thanks Gustave! -- More Questions - Gustave 17:40 1/04/2002 (0)
Oxygen Sensor - Adrian P 05:10 1/03/2002 (2)
- Re: Oxygen Sensor - Mike 08:46 1/03/2002 (1)
  - GET BASE IDLE AND CO SET!!! - Mike 12:17 1/03/2002 (0)
Rear spring rubber spacers - saggy rear end of the north 02:44 1/03/2002 (2)
- Here`s your answer................................ - John A 12:07 1/03/2002 (0)
- Re: Rear spring rubber spacers - Adrian P 04:42 1/03/2002 (0)
New BMW tuner in LA (url) - DTM-Tuning in Los Angeles 02:22 1/03/2002 (1)
- SPAM SPAM SPAM & too cheap to pay for his own URL - gotta use the free sites !!! 02:27 1/03/2002 (0)
pic of ritters bad ass m3 with 18' RK2's (pic) - adam p 00:25 1/03/2002 (4)
- Do I see stock brakes up front? - Denis 15:17 1/03/2002 (3)
  - they do look silly huh...... - ritter 15:45 1/03/2002 (2)
    - looks good Ritteroni... - Wofford 16:00 1/03/2002 (1)
      - answer your phone.... - ritter 16:30 1/03/2002 (0)
e30 m3 fs in san antonio TX - no affiliation (pic) - adam p 00:23 1/03/2002 (11)
- Any idea how much they are asking? (pic) - WOTjunkie 18:15 1/03/2002 (1)
  - it apeared to be stock. i think the wheels are NEW (pic) - adam p 21:54 1/03/2002 (0)
- Now thats better!! (pic) - Cosmic 13:28 1/03/2002 (0)
- I want those in 20" ;) (pic) - Anthony 88 ///M3 10:50 1/03/2002 (0)
- I like that they put the M3 on the pedestal dway (pic) - ritter 10:32 1/03/2002 (0)
- YUK ! Shoot the guy that japped that M3! - Mike 08:48 1/03/2002 (0)
- Is there an Escalade on the lot with 15" M3 rims? (nt) - MarkPike 07:52 1/03/2002 (0)
- those wheels are well kewl 8-) (pic) - Darren 07:30 1/03/2002 (0)
- Chrome Tri-spokes: wow. (nt) - ///Merendino 00:41 1/03/2002 (2)
  - Whao!Time warp 2 tihe late 80's,stone cold hustler (nt) - LV (OO=[][]=OO) 11:39 1/03/2002 (1)
    - LoL !!!!!! Bling Bling- Cash Money Crew :) (pic) - D///M3 20:29 1/03/2002 (0)
new pics of me car (pic) - adam p 00:20 1/03/2002 (5)
- CDXC90-------WOW! (pic) - -Eric 05:31 1/04/2002 (1)
  - I had the 5th one ever made cause i was a sony rep - adam p 15:35 1/04/2002 (0)
- what yr. is yours? i dont have that ABS light..... (pic) - frank 02:07 1/03/2002 (1)
  - its an orginal sticker that was never removed.. - adam p 03:40 1/03/2002 (0)
- no tree n here.. just cars (pic) - adam p 00:21 1/03/2002 (0)
new owner - Jeff 22:28 1/02/2002 (1)
- Re: new owner WELCOME - Rui 18:22 1/03/2002 (0)
Vader Seats - George 22:13 1/02/2002 (3)
- I have them installed in my E30 M3...(more) - Doug 09:56 1/03/2002 (0)
- Re: Vader Seats - m325ix/88m3 22:38 1/02/2002 (1)
  - Thanks! Sent him an email. (nt) - George 22:58 1/02/2002 (0)
DIY resonator....... - Tony 20:44 1/02/2002 (4)
- It is an easy job. - Lee 21:18 1/02/2002 (3)
  - You are wrong about the shop... - Jon 00:05 1/03/2002 (2)
    - So, all race shops should be fined - Lee 09:32 1/03/2002 (1)
      - Could? Maybe... Should? HELL NO! - Jon 11:51 1/03/2002 (0)
Where can I buy the Motorsport stripes stickers... - JLA 20:42 1/02/2002 (2)
- Re: Where can I buy the Motorsport stripes sticker - Damian 00:47 1/03/2002 (0)
- Any sticker shop will supply and install (nt) - Lee 21:18 1/02/2002 (0)
Engine still not starting - Justin 20:33 1/02/2002 (4)
- Re: Engine still not starting - Mike 08:23 1/03/2002 (2)
  - Re: Engine still not starting - Justin 22:23 1/03/2002 (1)
    - Re: Engine still not starting - David 87M3 08:33 1/04/2002 (0)
- Re: Engine still not starting - Dibs 23:50 1/02/2002 (0)
I'm not the only 1 who thinks Georgetown is crazy: - LV (OO=[][]=OO) 19:25 1/02/2002 (1)
- Yeah, you guys are kinda close....... - Magnus 19:47 1/02/2002 (0)
Will these wheels fit?? - dave 18:51 1/02/2002 (0)
Performance BMW article & pictures - Roy 18:18 1/02/2002 (6)
- Re: Performance BMW article & pictures - Michael 22:53 1/03/2002 (0)
- Very nice Roy, Congrats!...Questions for you/all? - Magnus 19:37 1/02/2002 (4)
  - Re: Very nice Roy, Congrats!...Questions for you/a - Roy 08:28 1/03/2002 (3)
    - want to give me a clue? On your Alternator? (nt) - Magnus 13:28 1/03/2002 (2)
      - Re: want to give me a clue? On your Alternator? - Roy 14:40 1/03/2002 (1)
        
        hmmm interesting! Thanks - MAGNUS 16:23 1/03/2002 (0)
Needed E30 Rocker Mouldings - Kyle Rowley 18:07 1/02/2002 (1)
- Re: Needed E30 Rocker Mouldings - x_man 11:17 1/03/2002 (0)
ground control or HR - Damian 17:59 1/02/2002 (1)
- Re: ground control or HR - Bry 01:47 1/03/2002 (0)
UK guy's - Paul D 17:23 1/02/2002 (2)
- Re: UK guy's - DarranP 14:38 1/03/2002 (1)
  - Re: UK guy's (url) - Neil M 04:30 1/04/2002 (0)
Rear Speaker Deck Removal - Rich 16:44 1/02/2002 (2)
- Remove the grills on top. 4 Phillips screws there (nt) - Lee 17:04 1/02/2002 (0)
- Remove the grills on top. 4 Phillips screws there (nt) - Lee 17:03 1/02/2002 (0)
Older stock radio with new one? - Bry 15:25 1/02/2002 (0)
Roops - DarranP 14:35 1/02/2002 (1)
- Re: Roops - Roops 04:23 1/03/2002 (0)
Simon Macdonald - DarranP 14:34 1/02/2002 (1)
- Re: Simon Macdonald - simon mac 10:42 1/05/2002 (0)
Just went thru WA State emissions test.... - Erik Brannfors - Seattle 13:29 1/02/2002 (1)
- Nys is ripoff $35 each year !!! - Basil'90M3 05:59 1/03/2002 (0)
DTM Racecar link.. (url) - m3lachsilber 12:48 1/02/2002 (2)
- Re: DTM Racecar link.. - leggwork 01:26 1/05/2002 (1)
  - Re: DTM Racecar link.. - m3lachsilber 20:31 1/05/2002 (0)
Actual DTM Racecar for Auction! (url) - m3lachsilber 12:45 1/02/2002 (3)
- Dead link...must have sold (nt) - michael 17:04 1/02/2002 (0)
- BEWARE: Shitty Christian and Bible SPAM (nt) - Lee 13:53 1/02/2002 (1)
  - Huh?? (nt) - George 14:15 1/02/2002 (0)
RX's still for sale...... (url) - ritter 12:42 1/02/2002 (1)
- Check your Email !!! (nt) - ///M-Cubed 13:46 1/02/2002 (0)
Can someone please run a carfax... - ritter 11:06 1/02/2002 (0)
I installed the evo airbox the other night, but - Jeff E. 08:38 1/02/2002 (8)
- Now I get it...there`s a rubber accordion boot.... - John A 13:08 1/02/2002 (1)
  - Yeah, I've got the foam donut now....I guess - Jeff E 13:15 1/02/2002 (0)
- Check to make sure the harness is securely........ - John A 13:03 1/02/2002 (0)
- Where does the engine's computer take - Jeff E 11:54 1/02/2002 (1)
  - temp sensor is attached to the cooling system... - C///MR 12:16 1/02/2002 (0)
- Other sources of leak - Lee 10:55 1/02/2002 (0)
- Check for air leaks on the elbo to the intake (M) - Scott 325i 09:54 1/02/2002 (1)
  - I'll give it a looksie, tho I'm pretty sure that - Jeff E 10:25 1/02/2002 (0)
south uk m3 owners? - simon macdonald 08:28 1/02/2002 (4)
- Re: south uk m3 owners? - DarranP 14:32 1/02/2002 (0)
- Re: south uk m3 owners? - Roops 08:40 1/02/2002 (2)
  - Re: south uk m3 owners? - simon macdonald 10:38 1/02/2002 (1)
    - Re: south uk m3 owners? - Roops 11:20 1/02/2002 (0)
E30 M3 FOR SALE - Mario L. 06:54 1/02/2002 (12)
- What about Mike Morris? He may be interested. (nt) - EricH 16:07 1/02/2002 (0)
- Mario Langsten is in NH. He KNOWS E30 M3`s........ - John A 13:21 1/02/2002 (1)
  - thanks........ (nt) - M3 Repete 13:22 1/02/2002 (0)
- I think he's in NH (nt) - Jack 11:53 1/02/2002 (0)
- where are you? (nt) - M3 Repete 09:12 1/02/2002 (7)
  - Re: where are you? - lexussalesdude 11:48 1/02/2002 (6)
    - yes, this ad should be in the classified section.. - M3 Repete 13:18 1/02/2002 (3)
      - as long as we're on the subject...... - M3 Repete 13:21 1/02/2002 (2)
        
        "The Web Enforcer"..able to block spam with the.. - m3lachsilber 19:03 1/02/2002 (1)
        
        sorry to hear you are so offended by my post.... - M3 Repete 10:03 1/03/2002 (0)
    - he's selling a E30 M3 not an E46, which is what - this board is about ... weirdsalesdude 12:03 1/02/2002 (1)
      - Missing the point, weird dude! - lexussalesdude 12:35 1/02/2002 (0)
What spark plugs ?? - Mike 03:03 1/02/2002 (14)
- What's a 68 GT500? (nt) - LV (OO=[][]=OO) 20:43 1/02/2002 (5)
  - Re: What's a 68 GT500? - Mike 07:39 1/03/2002 (4)
    - Mustang Shelby GT500,many over there? See many... - LV (OO=[][]=OO) 11:47 1/03/2002 (3)
      - Re: Mustang Shelby GT500,many over there? See many - Mike 15:41 1/03/2002 (2)
        
        $4per Gallon,Damn!I got a spot high octane 99cents - LV (OO=[][]=OO) 13:00 1/04/2002 (1)
        
        Neighbours hate it -> FLOWMASTER - mbruns57 08:23 1/07/2002 (0)
- bosch X5dtc...(3 points) from Europe - C///MR 11:56 1/02/2002 (0)
- Re: What spark plugs ?? - Randy///M3 06:49 1/02/2002 (0)
- My '88 M3 & '85M5 runnin' strong on NGK plugs !!! - Randy///M3 06:48 1/02/2002 (3)
  - >What type NGK plug (nt) - Mike 08:42 1/02/2002 (2)
    - D7EA.....but - C///MR 11:46 1/02/2002 (1)
      - Re: D7EA.....but - Damian 18:04 1/02/2002 (0)
- My '88 M3 & '85M5 runnin' strong on NGK plugs !!! - Randy///M3 06:48 1/02/2002 (1)
  - I have NGK Iridium IX $8ea, but have yet 2 install - LV (OO=[][]=OO) 20:35 1/02/2002 (0)
body part help - fast m3 02:42 1/02/2002 (0)
m50 conversion in bay area? - steve 02:00 1/02/2002 (3)
- Do it yourself. - Lee 10:31 1/02/2002 (2)
  - Re: Do it yourself. - Wofford 14:03 1/02/2002 (1)
    - Best way to get to know your car - Lee 17:38 1/02/2002 (0)
m50 conversion in bay area? - steve 02:00 1/02/2002 (0)
Damn Subarus WRX are everywhere:) - LV (xx=[][]=xO) 00:52 1/02/2002 (0)
M3 stall - Noah Domaine 00:43 1/02/2002 (4)
- Re: M3 stall - Chris W. 19:51 1/03/2002 (0)
- Re: M3 stall - BASEM 00:21 1/03/2002 (0)
- Re: M3 stall - David 87M3 03:30 1/02/2002 (0)
- Re: M3 stall - MJCalabrese 01:03 1/02/2002 (0)
Brakes and Maryland Inspection - Jerry 21:29 1/01/2002 (1)
- Re: Brakes and Maryland Inspection - LV (xx=[][]=xO) 01:07 1/02/2002 (0)
Some person hit my car in Georgetown,& looking 4:) - LV (xx=[][]=xO) 21:25 1/01/2002 (3)
- Dent Wizard, they can come to you (url) (nt) - michael 17:00 1/02/2002 (0)
- Nice Graphic........I even get it ;) - Magnus 23:22 1/01/2002 (1)
  - Thx,guys called DentWiz 2day! I LuV this board! (nt) - LV (OO=[][]=OO) 19:04 1/02/2002 (0)
Finally found a good M3 over the weekend.... - Bing 21:07 1/01/2002 (2)
- Good for you,now you can stop cryin'...... - Basil'90M3 06:58 1/02/2002 (0)
- Very nice Bing........Welcome to the family! (nt) - Magnus 23:16 1/01/2002 (0)
rear trailing arms the same for all e30's? - frank 20:00 1/01/2002 (3)
- Re: rear trailing arms the same for all e30's? - Randy Walters 01:22 1/02/2002 (1)
  - thanks again guys! - frank 14:12 1/02/2002 (0)
- They are except... - Jon 22:12 1/01/2002 (0)
Part # for spark plug removal tool - Justin 19:52 1/01/2002 (1)
- Snap-On Socket Is Much Better..... (m) (pic) - D///M3 20:25 1/01/2002 (0)
PaulD - DarranP 15:58 1/01/2002 (2)
- Re: PaulD - Paul D 17:17 1/02/2002 (0)
- Re: PaulD - Darren 19:45 1/01/2002 (0)
paging steve r.f ecu.call 973 583 3256. - tony 14:54 1/01/2002 (0)
DarrenP - Paul D 13:49 1/01/2002 (1)
- Re: DarrenP - DarranP 15:49 1/01/2002 (0)
part number help - Paul 13:20 1/01/2002 (2)
- 51-73-1-911-369....... (pic) - D///M3 17:49 1/01/2002 (1)
  - Thanks - Paul D 17:06 1/02/2002 (0)
Sway bars (nt) - JLA 12:59 1/01/2002 (6)
- Oops sorry:) Need advice... - JLA 13:04 1/01/2002 (5)
  - Re: Oops sorry:) Need advice... - JLA 20:36 1/02/2002 (0)
  - Connected to strut is 1.9 times stiffer than...... - John A 18:23 1/01/2002 (0)
  - Connected to strut is better - Lee 13:15 1/01/2002 (2)
    - Re: Connected to strut is better, however, you ... - John A 19:50 1/01/2002 (1)
      - My e30 Hartge H23 ripped the rear mounts - Lee 21:33 1/01/2002 (0)
Getrag 265 dogleg - ANders 10:13 1/01/2002 (2)
- But Metric Mechanic makes an hybrid gearbox - Lee 11:08 1/01/2002 (0)
- Contradiction - Lee 11:06 1/01/2002 (0)
Wanted crankshaft </= $100 - Josh Cook 09:10 1/01/2002 (0)
I might have to sell , (pic) - Sean 08:19 1/01/2002 (5)
- Re: I might have to sell , - Damian 17:30 1/01/2002 (4)
  - Re: I might have to sell , - -Eric 04:16 1/02/2002 (0)
  - Re: I might have to sell , - MarkPike 19:30 1/01/2002 (0)
  - Re: I might have to sell , - Howard 18:39 1/01/2002 (0)
  - Hah! Exact Opposite Here :) (pic) - D///M3 17:58 1/01/2002 (0)
radiator question please help - fast m3 02:34 1/01/2002 (7)
- another question - fast m3 06:18 1/01/2002 (1)
  - www.thepartsbin.com for $239.53 - C///MR 11:01 1/01/2002 (0)
- Go OEM (Behr) - C///MR 03:15 1/01/2002 (3)
  - Re: Go OEM (Behr) - M3andM3 03:36 1/01/2002 (2)
    - Re: Go OEM (Behr) - John A 09:12 1/01/2002 (1)
      - BMW antifreeze is phosphate free and silicate..... - John A 09:20 1/01/2002 (0)
- Re: radiator question please help - John A 03:01 1/01/2002 (0)
Happy New Year to every M3 owner - Lee 00:08 1/01/2002 (1)
- Re: Happy New Year to you all (nt) - AC 01:25 1/01/2002 (0)

Questions, comments, or problems, please visit the Roadfly help desk.