bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 03

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 03
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

WTB Heater blower motor - Justin 22:32 1/27/2002 (0)
WTB Heater blower motor - Justin 22:32 1/27/2002 (0)
FS: Grey seats from E30 M3 in very good condition (url) - Jim Tappan 22:29 1/27/2002 (0)
E30 M3 OE Wheels in Chrome on "E" Cheap for all 5 (url) (nt) - carotsticks 22:22 1/27/2002 (1)
- Chrome...shudder (nt) - michael 08:10 1/28/2002 (0)
What are the optimal spark plug "gap" ?? (nt) - worked / adam p 21:53 1/27/2002 (5)
- Re: Always confirm your gaps!!! - eric_m3 19:19 1/28/2002 (0)
- X5DC`s come gapped to the M3 factory spec......... - John A 02:01 1/28/2002 (1)
  - 0.024? Hmmm, same as my 2002. (nt) - michael 13:03 1/28/2002 (0)
- I gapped mine - Bry 22:16 1/27/2002 (1)
  - I use 0.045... - Stan 08:01 1/28/2002 (0)
Question for TMS2.5 kit owners - JLA 20:26 1/27/2002 (1)
- Re: Nope. should have done tensioner then. - eric_m3 19:23 1/28/2002 (0)
E30 M3 wheels and tires? - Robert E Heacox 18:24 1/27/2002 (1)
- What offset? - Jack S. 23:18 1/27/2002 (0)
Centre armrest - DarranP 17:48 1/27/2002 (0)
Wheel refurbing in th UK - DarranP 17:46 1/27/2002 (7)
- Re: Wheel refurbing in th UK - Paul D 12:27 1/28/2002 (0)
- Re: Wheel refurbing in th UK - GilesL 12:12 1/28/2002 (2)
  - Re: Did that price include vat? - DarranP 12:37 1/28/2002 (1)
    - Re: Did that price include vat? - GilesL 04:45 1/29/2002 (0)
- Re: Wheel refurbing in th UK (url) - Roops 08:20 1/28/2002 (0)
- Re: Wheel refurbing in th UK - David 87M3 06:42 1/28/2002 (0)
- Re: Wheel refurbing in th UK - Roops 04:36 1/28/2002 (0)
Where to buy CF Hood???? - rosica 17:29 1/27/2002 (6)
- Re: Where to buy CF Hood???? (url) - edro 11:18 1/29/2002 (0)
- Re: Where to buy CF Hood???? (url) - edro 18:51 1/27/2002 (4)
  - hmmm... (pic) - Eric 04:41 1/28/2002 (2)
    - Global Motorsports - m325ix/88m3 19:30 1/28/2002 (1)
      - Re: Global Motorsports - Eric 20:29 1/28/2002 (0)
  - NE1 had experience with their EVOIII rear spoiler? (nt) - '88 2.5L 21:23 1/27/2002 (0)
What is the optimal size 17, also max width etc.?? - WOTjunkie 17:17 1/27/2002 (1)
- try 225/40/17 with 17/8 with 20mm offset - worked / adam p 17:35 1/27/2002 (0)
shocks - SteveS 14:58 1/27/2002 (1)
- I have them on my convertable!! more - adam p 15:32 1/27/2002 (0)
How often do E30 M3's come up for sale../w - Estoril M3 13:07 1/27/2002 (2)
- here's one (hurry or ill beat you to it) - Angus 17:29 1/28/2002 (0)
- Re: How often do E30 M3's come up for sale../w - L. James 20:52 1/27/2002 (0)
FYI - Rear factory E30 spoiler on "E" (url) (nt) - TC 12:07 1/27/2002 (0)
FS: Harness bar for E30 M3 - Mike 11:54 1/27/2002 (0)
should I dive into ownership? - MFB 09:07 1/27/2002 (2)
- If you like turning a wrench, buy a project E30 M3 - B. Wheaton 12:27 1/27/2002 (0)
- Just do it! (nt) - Ed 10:42 1/27/2002 (0)
Nitrous - Geoff 03:59 1/27/2002 (1)
- Re: Nitrous - DARREN J 12:08 1/27/2002 (0)
Motorsport colours - Geoff 03:56 1/27/2002 (3)
- Re: Motorsport colours - C///MR 18:04 1/27/2002 (2)
  - Re: Motorsport colours - Geoff 17:19 1/28/2002 (0)
  - got those in RGB? (nt) - Victor Hall 23:10 1/27/2002 (0)
Could Vanos be applied to s14? - Gordon Monsen 01:43 1/27/2002 (6)
- Re: Could Vanos be applied to s14? - Gordon Monsen 19:13 1/27/2002 (1)
  - Won't work.. - Stan 08:15 1/28/2002 (0)
- To boost the torque / HP, most effective MOD is... - Stan 08:52 1/27/2002 (0)
- You lost me early...Which part from a 6er? - stevetall 04:47 1/27/2002 (1)
  - I think he means 6cyl M3 engine (e36) eom (nt) - ARI 20:35 1/27/2002 (0)
- Re: Could Vanos be applied to s14? - Geoff 03:46 1/27/2002 (0)
WTB: BMW Infrared control (slot) alpine radio - cosmosm3 00:21 1/27/2002 (0)
NE1 use the Koala Motorsport M3 manual on CD, how (nt) - does it rate? Drew_Houston 23:18 1/26/2002 (7)
- Re: NE1 use the Koala Motorsport M3 manual on CD, - Mike 12:00 1/27/2002 (0)
- Re: My $.02 - eric_m3 07:44 1/27/2002 (0)
- Re: NE1 use the Koala Motorsport M3 manual on CD, - cosmosm3 00:19 1/27/2002 (4)
  - Re: NE1 use the Koala Motorsport M3 manual on CD, - jej 01:10 1/27/2002 (3)
    - Re: NE1 use the Koala Motorsport M3 manual on CD, - Kris 00:48 1/28/2002 (0)
    - Agree 50% - Jon K 15:32 1/27/2002 (0)
    - I agree (nt) - Jim 01:36 1/27/2002 (0)
Battery Location - Drew 22:42 1/26/2002 (2)
- Yes, correct. They all are. (nt) - Magnus! 22:50 1/26/2002 (1)
  - Re: Yes, correct. They all are. - Drew 23:36 1/26/2002 (0)
ENGINE FLUSHIN QUESTION.... - Dario 21:48 1/26/2002 (4)
- Re: ENGINE FLUSHIN QUESTION.... - Tunaoue 00:24 1/28/2002 (0)
- Re: why do you need to flush the engine? - eric_m3 07:49 1/27/2002 (1)
  - Re: why do you need to flush the engine? - C///MR 17:55 1/27/2002 (0)
- Re: ENGINE FLUSHIN QUESTION.... - C///MR 22:50 1/26/2002 (0)
FS Used R-compound 235/40/17 tires (url) - Vader M3 19:47 1/26/2002 (1)
- I am interested in the rims - RocksM3 20:41 1/27/2002 (0)
Big PROBLEM PLEASE HELP son decided to wash - MKM3 19:40 1/26/2002 (6)
- Re: Big PROBLEM PLEASE HELP son decided to wash - eric_m3 07:54 1/27/2002 (0)
- Re: Big PROBLEM PLEASE HELP son decided to wash - BASEM 21:19 1/26/2002 (0)
- Re: Big PROBLEM PLEASE HELP son decided to wash - JERSEYJIM 20:45 1/26/2002 (0)
- same thing happened to me - ARI 20:39 1/26/2002 (0)
- Re: The car is dead and needs to be sold ASAP! - wjcarnes 20:33 1/26/2002 (1)
  - Re: The car is dead and needs to be sold ASAP! - RogerJ 09:45 1/27/2002 (0)
Which car cover does everyone use? (nt) - Chad Wilkins 19:03 1/26/2002 (2)
- Covercraft technalon - Randy '90M3/'85 euro M5 20:01 1/26/2002 (1)
  - i have a bmw one from the dealer, its awsome.. - worked / adam p 20:25 1/26/2002 (0)
FOR SALE MOMO MONTE CARLO WHEEL WITH HUD - Rui 18:16 1/26/2002 (0)
ANY ONE INTERESTED IN E30 M3 1988 110K IN NJ - Rui 18:14 1/26/2002 (1)
- Pics... - rIChie 01:00 1/29/2002 (0)
Looking for Drivers Side e30 m3 Fender - Matt 16:56 1/26/2002 (0)
wet intake plentum?? - Adam p 16:35 1/26/2002 (2)
- Re: inside or outside? - eric_m3 16:59 1/26/2002 (0)
- Re: wet intake plentum?? - Angus 16:58 1/26/2002 (0)
Wheel Question - VanceJ 13:20 1/26/2002 (2)
- Re: Wheel Question - EDDINANM3 23:44 1/28/2002 (1)
  - Thanks for the response... (nt) - VanceJ 21:49 1/30/2002 (0)
Bimmercruize '02 (url) - '88 325e 12:39 1/26/2002 (0)
NE1 sellin' white front passenger side M3 fender? (nt) - LV (OO=[][]=OO) 12:20 1/26/2002 (0)
jej, what is your e-mail? - Bry 02:48 1/26/2002 (0)
parts for sale / have to pay for that w pump.. - worked / adam p 01:50 1/26/2002 (3)
- Re: parts for sale / have to pay for that w pump.. - Gary H 23:56 1/26/2002 (0)
- Great seller, thanks for the seats adam (nt) - MichaelH 09:45 1/26/2002 (1)
  - Im just glad I could help!! - Adam p 16:32 1/26/2002 (0)
water pump intallation done, but 1 question? - worked / adam p 01:32 1/26/2002 (3)
- Adam, did you torque the water pump bolts? (m) - John A 02:45 1/26/2002 (2)
  - i think M - worked / adam p 03:16 1/26/2002 (1)
    - I use my torque wrench all the time - Bry 13:07 1/26/2002 (0)
plug wrench - jamie 22:14 1/25/2002 (4)
- 11/16"(needs machining) 17,5mm - adrianM/// 09:54 1/27/2002 (2)
  - Could be ! - adrianM/// 20:55 1/27/2002 (0)
  - Try usin' a 12 point 11/16" socket = 17.5mm (More) - LV (OO=[][]=OO) 12:09 1/27/2002 (0)
- Bosch plugs are 11/16". NGK`s are 18mm (more) - John A 01:16 1/26/2002 (0)
SOLD MY CAR :( (pic) - m3lachssilber 21:59 1/25/2002 (4)
- Was that the wisconsin car,with red int ??? - Randy '90M3/'85 euro M5 20:13 1/26/2002 (1)
  - Yes..that was mine. - m3lachssilber 21:23 1/26/2002 (0)
- What year? - Evan... 00:38 1/26/2002 (1)
  - 1988 - m3lachssilber 10:57 1/26/2002 (0)
where can I get a car cover for E30 M3 ? (nt) - Brian Butler 21:49 1/25/2002 (4)
- Pep boys or autozone,covercraft technalon. - Randy '90M3/'85 euro M5 20:15 1/26/2002 (0)
- Re: where can I get a car cover for E30 M3 ? - Bry 11:35 1/26/2002 (0)
- igot mine at costco! they are great - m3pedro 01:43 1/26/2002 (0)
- Re: where can I get a car cover for E30 M3 ? - m3lachssilber 22:04 1/25/2002 (0)
where can I get a car cover for E30 M3 ? (nt) - Brian Butler 21:48 1/25/2002 (0)
So, about these Volvo caps and rotors... (pic) - Jon 17:18 1/25/2002 (6)
- I just did this (pic) - Eric 03:34 1/26/2002 (0)
- Re: So, about these Volvo caps and rotors... (pic) - John A 21:57 1/25/2002 (0)
- caps and rotors... (pic) - C///MR 19:19 1/25/2002 (0)
- Re: So, about these Volvo caps and rotors... (pic) - John A 17:44 1/25/2002 (2)
  - The rotor in my M3 looks nothing like........ (pic) - Derin 20:06 1/25/2002 (1)
    - wow...really??? I'm confused (pic) - C///MR 20:37 1/25/2002 (0)
need Passenger Side Fender - Matt 15:57 1/25/2002 (1)
- Email me privately ....more - Charley 17:46 1/25/2002 (0)
Squeaky suspension - Anthony 88 ///M3 14:12 1/25/2002 (3)
- rear shock mounts??? - Angus 11:20 1/26/2002 (0)
- probably bushings are warming up/changing shape> - Bill 14:32 1/25/2002 (1)
  - Re: probably bushings are warming up/changing shap - Anthony 88 M3 20:33 1/25/2002 (0)
FS Brembo big brake kit and more - ADAMK 14:03 1/25/2002 (6)
- sounds like denis's old car - worked / adam p 14:14 1/25/2002 (5)
  - Shit.... - Denis 18:11 1/25/2002 (3)
    - Re: Shit.... (pic) - MarkPike 05:52 1/26/2002 (0)
    - that poor poor car - Eric 03:39 1/26/2002 (0)
    - LOL.. and ill take that roll bar when you see it - worked / adam p 21:48 1/25/2002 (0)
  - no owner is DANNY - ADAMK 14:18 1/25/2002 (0)
M5 replica wheels. - Wiener 13:06 1/25/2002 (2)
- Re: M5 replica wheels. - David 14:37 1/25/2002 (1)
  - what model M5 (nt) - Gary 88 Lachssilber 19:51 1/25/2002 (0)
Emergency...need help! - Denis 12:24 1/25/2002 (3)
- IT IS 72.2 OR 72.5 FOR SURE - ADAMK 14:21 1/25/2002 (0)
- I thought u sold m3 long time ago? - m325ix/88m3 12:57 1/25/2002 (1)
  - Customer's car.... - Denis 13:48 1/25/2002 (0)
Will 17x9 forgeline rims fit E30M3?? Is it 2 Wide? (nt) - (nt) YJ 12:04 1/25/2002 (0)
ADMIN: When can we search past 2000 week 43?????? (nt) - Jon 11:35 1/25/2002 (1)
- Don't even bother posting it! more - Magnus 18:51 1/25/2002 (0)
Creaking sound from rear end - wayne-FL 10:34 1/25/2002 (7)
- Re: Creaking sound from rear end - Wayne-FL 23:34 1/25/2002 (1)
  - Beano = Gas-X...for YOUR rearend, not cars! (nt) - Jeff E 08:48 1/28/2002 (0)
- Give Beano a try - works for me. ;^) (nt) - B. Wheaton 16:39 1/25/2002 (1)
  - I second the beano vote - JDM3 21:27 1/25/2002 (0)
- Could be your rear shock mounts - Gary 88 Lachssilber 12:20 1/25/2002 (0)
- Re: Creaking sound from rear end - paul 12:10 1/25/2002 (0)
- Re: Creaking sound from rear end - tudor 12:09 1/25/2002 (0)
Help - bent rims - JPL 10:20 1/25/2002 (3)
- Re: Help - bent rims (nt) - MarkPike 04:21 2/02/2002 (0)
- THERE IS A PLACE IS LOS ANGELES (MORE) - ADAMK 14:23 1/25/2002 (0)
- It depends... - Jon 11:09 1/25/2002 (0)
Wanted lower strut brackets - Mike Robinson 09:37 1/25/2002 (0)
F/S 95 m50 motor - mark 05:04 1/25/2002 (0)
'91 E30 M3 for sale 25K miles!!! - Fred 04:29 1/25/2002 (1)
- Re: '91 E30 M3 for sale 25K miles!!! - Craig 22:24 1/26/2002 (0)
UK Guys - I have my Dyno results - Roops 04:21 1/25/2002 (11)
- Re: UK Guys - All the answers in one hit...ish... - Roops 03:29 1/28/2002 (0)
- Re: UK Guys - I have my Dyno results - Craig 22:25 1/26/2002 (0)
- Re: UK Guys - I have my Dyno results - Age P 10:59 1/26/2002 (0)
- Wait..... - ADA///M 13:49 1/25/2002 (3)
  - Re: Wait..... - Darren M 13:58 1/25/2002 (2)
    - OK... - ADA///M 21:44 1/25/2002 (1)
      - Re: OK... - Age P 10:47 1/26/2002 (0)
- rwhp - SteveS 12:48 1/25/2002 (0)
- Re: UK Guys - I have my Dyno results - DarranP 04:47 1/25/2002 (2)
  - Re: UK Guys - I have my Dyno results - Roops 05:57 1/25/2002 (1)
    - Re: UK Guys - I have my Dyno results - Darren M 06:58 1/25/2002 (0)
Sand in intake ports - Gary H 02:14 1/25/2002 (8)
- Dangerous! (more) - Jon 11:14 1/25/2002 (0)
- Re: Sand in intake ports - Gary H 02:15 1/25/2002 (6)
  - Test 2 - sand image 2 (pic) - Gary H 00:47 1/27/2002 (1)
    - I now know how to post multiple pictures! :) - Gary H 00:50 1/27/2002 (0)
  - Testing (pic) - Gary H 00:30 1/27/2002 (0)
  - not sure about sand, can i ask about sc 4 m3???? - worked / adam p 03:34 1/25/2002 (2)
    - Re: not sure about sand, can i ask about sc 4 m3?? - Gary H 12:19 1/25/2002 (1)
      - Re: not sure about sand, can i ask about sc 4 m3?? - Gary H 12:20 1/25/2002 (0)
Jacket for you kids (url) - Torker_D 01:13 1/25/2002 (0)
how many litters or gallons in the coolant sys? (nt) - worked / adam p 00:17 1/25/2002 (2)
- Re: how many litters or gallons in the coolant sys (url) - edro 00:35 1/25/2002 (1)
  - thanks - worked / adam p 01:41 1/25/2002 (0)
M3 For Sale Info - Charlie 00:08 1/25/2002 (1)
- Sold already, I tried to buy it (eom) - Charley 02:48 1/25/2002 (0)
Will E46 wheels fit E30 M3? (nt) - Drew 23:00 1/24/2002 (2)
- no they won't. Different insets, you'll need space - hardtailer 14:00 1/26/2002 (0)
- I don't see why not - Ari 00:35 1/25/2002 (0)
M-CONTOUR WHEEL WEIGHT? - wesleylam2k@yahoo.com 22:45 1/24/2002 (3)
- Re: M-CONTOUR WHEEL WEIGHT? - MarkPike 09:06 1/25/2002 (0)
- Re: M-CONTOUR WHEEL WEIGHT? - MarkPike 09:06 1/25/2002 (0)
- I think about 24 lbs each... (pic) - B. Wheaton 23:31 1/24/2002 (0)
FS: 18x8 740spt replicas et20 w/tires $1100 firm - dinanbyzanz 21:45 1/24/2002 (0)
FS: REDUCED!- stock E30 M3 15" rims $280 firm. - dinanbyzanz 21:42 1/24/2002 (0)
best price on grill m3 emblem - Jack 20:05 1/24/2002 (1)
- those are pricey no matter what....... - B. Wheaton 00:06 1/25/2002 (0)
Is it a 3.73:1 ring-and-pinion ratio or a 4.10:1? - Blockhead 19:49 1/24/2002 (2)
- Re: Is it a 3.73:1 ring-and-pinion ratio or a 4.10 - BASEM 23:00 1/24/2002 (1)
  - Or count how many times the driveshaft turns... - Lee 03:41 2/01/2002 (0)
Thinking about selling the ///M and buying a 93RX7 - ADAMK 19:02 1/24/2002 (12)
- THANKS GUYS/ I'M KEEPING THE ///M3 - ADAMK 14:20 1/25/2002 (0)
- one high maintenance car to another-no savings - JDM3 12:24 1/25/2002 (0)
- Re: Thinking about selling the ///M and buying a 9 - rob 23:44 1/24/2002 (1)
  - i know some about these cars - worked / adam p 00:17 1/25/2002 (0)
- I had a 94... - leo 21:29 1/24/2002 (0)
- Re: Very stout cars for sure! - eric_m3 21:12 1/24/2002 (0)
- Re: Thinking about selling the ///M and buying a 9 - Chris W. 20:51 1/24/2002 (0)
- prepare to have your account sodomized. (nt) - Eugene Lou 19:22 1/24/2002 (3)
  - LoL Eugene!!! (n/t) (pic) - D///M3 20:35 1/24/2002 (2)
    - Nice Washer Res. Cap. Where's it from? (nt) - George 21:55 1/24/2002 (1)
      - Hah- Thanks! Well, Actually (m-->) (pic) - D///M3 22:19 1/24/2002 (0)
- RX7's rule - Dave 19:10 1/24/2002 (0)
Replacing Speakers - Jason 18:56 1/24/2002 (1)
- Re: Replacing Speakers - Jack 09:32 1/25/2002 (0)
anybody interested in a spare motor and trans - mike 18:02 1/24/2002 (0)
autox event NJ/NY March 17th!! - tsil m3 17:51 1/24/2002 (0)
Original 1988 M3 Service Manual??????? - Jose Perez 17:42 1/24/2002 (0)
suspension question - EDWIN 17:25 1/24/2002 (1)
- Re: suspension question - John A 20:37 1/24/2002 (0)
When should aux fan start? - Jack 17:10 1/24/2002 (3)
- When it reaches half or just barely past half, it - Jeff E 17:26 1/24/2002 (2)
  - Re: When it reaches half or just barely past half, - Jack 09:26 1/25/2002 (1)
    - Jack, the 3/4 mark is 90 degrees Centigrade(nt) - John A 01:25 1/26/2002 (0)
question for all you owners... - j.c. estoril 16:45 1/24/2002 (4)
- Just had a friend get his entire front end stolen - jwilberding 17:40 1/25/2002 (0)
- makes me glad to park behind a gate underground - B. Wheaton 23:34 1/24/2002 (0)
- /// M and roundelel Emblem. all parking lights - ADAMK 17:26 1/24/2002 (0)
- ///M emblems and My antenna twice (nt) - Gary 88 Lachssilber 17:12 1/24/2002 (0)
HOW MUCH ANTIFREEZ TO MIX FOR COOLANT SYS? (nt) - adam p 15:43 1/24/2002 (4)
- Re: depends on where you use the car - eric_m3 21:05 1/24/2002 (0)
- mix half the bottle with water. 50 -50 mix n/m - scott 325i 15:59 1/24/2002 (2)
  - Recommend using distilled instead of tap water (nt) - Gordon L 16:13 1/24/2002 (1)
    - And Water Wetter!! Available @ Pep Boys. - Jon K 16:26 1/24/2002 (0)
Special Edition M3 - Zeucas John 15:11 1/24/2002 (2)
- 260 HP Alpina B6S (read all about it) (url) - MarkPike 20:46 1/24/2002 (0)
- Re: Special Edition M3 - nicholas 19:23 1/24/2002 (0)
ADAM K from LA thanks a lot - Matt 15:08 1/24/2002 (1)
- you are welcome. glad u r happy :-) - ADAMK 16:39 1/24/2002 (0)
North Carolina Auto Show! - CM5GO 14:43 1/24/2002 (1)
- Re: North Carolina Auto Show! - Ben Moore 20:14 1/24/2002 (0)
NE1 have the original Momo Quasar wheels? (nt) - blownM 12:38 1/24/2002 (12)
- This place is selling some... (url) - Jon 16:50 1/24/2002 (3)
  - NE1 have these? WTB. (url) - blownM 17:03 1/24/2002 (0)
  - Thanks a bunch!1 This is the site I was looking 4 (url) - blownM 17:01 1/24/2002 (0)
  - I guess they are probably 4-bolt though. (nt) - Jon 16:55 1/24/2002 (0)
- Re: NE1 have the original Momo Quasar wheels? (url) - EricH 15:50 1/24/2002 (1)
  - NO, these are the new ones - blownM 16:27 1/24/2002 (0)
- Are these the wheels? (pic) - MarkPike 14:54 1/24/2002 (5)
  - ...on the white car: Momo R3 (pic) - MarkPike 20:49 1/24/2002 (0)
  - Not quite. They are black 5 star w/chrome rim (nt) - blownM 16:25 1/24/2002 (2)
    - Actually have 7 spokes. - Jon 16:56 1/24/2002 (1)
      - My bad, your right. Thanks - blownM 17:01 1/24/2002 (0)
  - I think those are O.Z.'s or Fitti's (pic) - Anthony 88 ///M3 15:00 1/24/2002 (0)
Installed M-Technic steering wheel (Leather EVO) (pic) - Anthony 88 ///M3 11:35 1/24/2002 (7)
- i have sport evo wheel with suede & it's the best (nt) - john///m3 23:43 1/25/2002 (0)
- I agree. I love mine. (nt) - Austin 16:30 1/24/2002 (0)
- I would love to see pics - Victor Hall 12:59 1/24/2002 (4)
  - Here are some... (pic) - Jon 14:29 1/24/2002 (2)
    - Re: Here are some... (pic) - RogerJ 03:14 1/25/2002 (1)
      - I think that car belongs to Derin... (pic) - Jon 11:29 1/25/2002 (0)
  - me too (nt) - EricH 13:24 1/24/2002 (0)
Clear Euro Ellipsoid headlight kit 360.00, Hella.. - John@Bekkers 08:31 1/24/2002 (0)
seized caliper! - sterlingsilber 07:07 1/24/2002 (4)
- Re: Try this - eric_m3 08:23 1/24/2002 (3)
  - Watch your fingers!... - michael 09:37 1/24/2002 (2)
    - Re: Nice add in! Thanks - eric_m3 21:06 1/24/2002 (1)
      - thanks guys, very helpful - sterlingsilber 06:52 1/25/2002 (0)
Where to buy a new alternator ? - Age P 02:08 1/24/2002 (2)
- Spare Alternator or 2. - Dibs 16:38 1/27/2002 (0)
- Re: Where to buy a new alternator ? - Darren M 07:04 1/24/2002 (0)
any help would be nice.. fan bolt stuck .. ideas (pic) - adam p 01:23 1/24/2002 (5)
- Re: any help would be nice.. fan bolt stuck .. i (pic) - paul 12:32 1/24/2002 (0)
- Re: any help would be nice.. fan bolt stuck .. i (pic) - Jon 02:09 1/24/2002 (3)
  - Re: any help would be nice.. fan bolt stuck .. i (pic) - RogerJ 02:37 1/24/2002 (1)
    - thanks, i tried that but the motor would move.. (pic) - worked / adam p 02:59 1/24/2002 (0)
  - Hammer+BMW=the only tool that works. ha THANKS it (pic) - worked / adam p 02:36 1/24/2002 (0)
The last straw, my M3 is hibernating! - Cosmic 01:18 1/24/2002 (1)
- Wanna Sell It? - Estoril M3 01:44 1/28/2002 (0)
FS: orig 15x7 M3 wheels w/caps $350. - dinanbyzanz 00:43 1/24/2002 (0)
for those of you with model cars... (Mnichamps) (url) (pic) - B. Wheaton 23:09 1/23/2002 (3)
- IKEA - Anthony 88 ///M3 10:05 1/24/2002 (1)
  - Re: IKEA - Alex 11:23 1/24/2002 (0)
- i just sold all my cars....damnit (pic) - nicholas 00:02 1/24/2002 (0)
Who repair odometer from 1988 M3????????? - Jose Perez 22:57 1/23/2002 (1)
- Re: Who repair odometer from 1988 M3????????? (url) - Mike 00:11 1/24/2002 (0)
Anyone Going To Sebring This Weekend--->CU There! (pic) - D///M3 22:14 1/23/2002 (5)
- I might go, but... (url) - michael 16:45 1/24/2002 (2)
  - oops (url) - michael 16:46 1/24/2002 (1)
    - screw it (pic) (nt) - michael 16:59 1/24/2002 (0)
- Whats going on there? - Howard 13:57 1/24/2002 (1)
  - It's the first item in the BMWccA calender... (url) (nt) - michael 16:32 1/24/2002 (0)
Anyone selling a 90-91 Silver >50k miles? (nt) - Evan... 21:22 1/23/2002 (5)
- >=greater than; <=less than (nt) - John A 21:46 1/23/2002 (4)
  - Opps, my bad <50k miles - Evan... 23:07 1/23/2002 (3)
    - Hey Evan.... - Bruce 07:04 1/24/2002 (2)
      - Hey Bruce - Evan... 13:38 1/24/2002 (1)
        
        Hey Evan - Bruce 18:55 1/24/2002 (0)
M Dead Pedal (pic) - Steven 21:10 1/23/2002 (1)
- They are NLA, and $$ if you find one(eom) (nt) - Charley 21:21 1/23/2002 (0)
any e30's for sale in ny/nj/ct? - j.c. estoril 18:07 1/23/2002 (2)
- Re: any e30's for sale in ny/nj/ct? - JamesM 18:36 1/23/2002 (1)
  - Re: any e30's for sale in ny/nj/ct? - j.c. estoril 16:43 1/24/2002 (0)
FS...E30 M3 rims w/tires...Perfection condition - Chris Greco 17:58 1/23/2002 (2)
- Re: FS...E30 M3 rims w/tires...Perfection conditio - MIKE NO E30 M3 18:39 1/23/2002 (1)
  - Re: FS...E30 M3 rims w/tires...Perfection conditio - Jose Perez 14:02 1/27/2002 (0)
water pump Question - adam p 17:24 1/23/2002 (2)
- Re: water pump Question - MarkPike 18:21 1/23/2002 (1)
  - THANKS.. ill get those hoses also.. - adam p 22:25 1/23/2002 (0)
Where to search? - andy 16:00 1/23/2002 (1)
- There's one in Hemmings... (url) - michael 16:20 1/23/2002 (0)
M3 For sale - Gary 14:33 1/23/2002 (0)
No SI lights - kevin 13:37 1/23/2002 (0)
Battery Light/Idle High - Ryan 12:07 1/23/2002 (3)
- Light behaves as designed... - Jon 11:25 1/24/2002 (0)
- Re: Synch T-bodies, Adjust CO, set base Idle - eric_m3 08:29 1/24/2002 (0)
- Go back to the previous repair "the alternator". (nt) - adrian 17:38 1/23/2002 (0)
M Cars Register - JonM3Cab 12:00 1/23/2002 (4)
- its coming soon - chris 14:50 1/23/2002 (0)
- Re: M Cars Register - Jim F. 13:02 1/23/2002 (1)
  - Wow, what a nice site! nt - Jack S. 15:37 1/23/2002 (0)
- We sorta have one of those already.... (url) (nt) - Jeff E 12:17 1/23/2002 (0)
Koni Sport Shocks - edro 11:24 1/23/2002 (13)
- FS Koni Sport Shocks - jej 23:43 1/23/2002 (1)
  - What is your e-mail? - Bry 02:47 1/26/2002 (0)
- Grassroots Motorsports... - Jon 16:22 1/23/2002 (4)
  - Beatcha to it.... - JamesM 19:21 1/23/2002 (3)
    - Re: Beatcha to it.... - edro 20:42 1/23/2002 (2)
      - The rears are adjustable, but.... - JamesM 11:02 1/24/2002 (1)
        
        Re: The rears are adjustable, but.... - edro 15:49 1/24/2002 (0)
- Re: Koni Sport Shocks - MJ 13:06 1/23/2002 (5)
  - Re: Koni Sport Shocks - edro 14:47 1/23/2002 (0)
  - Assume that they are like all Koni's, only>> - Bill 14:00 1/23/2002 (1)
    - Re: Assume that they are like all Koni's, only> - MJ 10:08 1/29/2002 (0)
  - more ? on Koni's - C///MR 13:14 1/23/2002 (1)
    - Re: more ? on Koni's - MJ 10:16 1/29/2002 (0)
Gray Rims + a center cap question (pic) - MarkPike 11:13 1/23/2002 (1)
- Re: Gray Rims + a center cap question - wjcarnes 11:41 1/23/2002 (0)
PaulD - Wheel refurbing? - DarranP 07:39 1/23/2002 (0)
Alternater where to buy a new one from - Adrian P 06:25 1/23/2002 (4)
- You sure its not your belt making the noise. - Jack 09:29 1/23/2002 (1)
  - Re: You sure its not your belt making the noise. - Adrian P 11:35 1/23/2002 (0)
- Re: Alternater where to buy a new one from - simon mac 06:54 1/23/2002 (1)
  - Re: Alternater where to buy a new one from - Adrian P 07:38 1/23/2002 (0)
Rev limit with Schrick cams - Adrian P 06:02 1/23/2002 (7)
- Re: Rev limit with Schrick cams - Gustave 13:05 1/23/2002 (0)
- Re: Rev limit with Schrick cams - Roops 06:55 1/23/2002 (5)
  - Re: Rev limit with Schrick cams - Gordon Monsen 13:17 1/23/2002 (1)
    - Re: Rev limit with Schrick cams - Roops 13:25 1/23/2002 (0)
  - post the dyno results if u can(more) - Darren M 07:09 1/23/2002 (2)
    - Re: post the dyno results if u can(more) - Roops 07:19 1/23/2002 (1)
      - Re: post the dyno results if u can(more) - Adrian P 07:41 1/23/2002 (0)
AdrianP - Please look! - DarranP 04:49 1/23/2002 (3)
- Re: AdrianP - Please look! - Adrian P 05:52 1/23/2002 (2)
  - Re: Bugger!!!! - DarranP 06:08 1/23/2002 (1)
    - Re: Bugger!!!! - Adrian P 06:28 1/23/2002 (0)
just bought one in San Francisco - Brian Butler 00:06 1/23/2002 (2)
- Re: just bought one in San Francisco - M3andM3 00:01 1/24/2002 (0)
- Bill Arnold BMW Service, San Rafael>> - Bill 00:51 1/23/2002 (0)
just bought one in San Francisco - Brian Butler 00:05 1/23/2002 (5)
- This would not happen to be the "Berkley" car? - Evan... 21:18 1/23/2002 (3)
  - Re: This would not happen to be the "Berkley" car? - Brian Butler 23:52 1/23/2002 (2)
    - Did the car come with about 250k+ miles on it? - Evan... 17:58 1/24/2002 (1)
      - Re: Did the car come with about 250k+ miles on it? - Brian Butler 22:08 1/24/2002 (0)
- Eric's Foreign Car Service@415.731.8144 - Mark M 11:39 1/23/2002 (0)
colant on garage floor. anyone replaced the ?? - adam p 23:57 1/22/2002 (8)
- Re: colant on garage floor. anyone replaced the ?? - Andrew 00:31 1/23/2002 (7)
  - its definatly the water pump.. i just looked and (pic) - adam p 01:02 1/23/2002 (5)
    - www.importeccatalog.com has the water pump ....... (pic) - John A 01:32 1/23/2002 (1)
      - Re: www.importeccatalog.com has the water pump ... (pic) - John A 01:37 1/23/2002 (0)
    - Re: its definatly the water pump.. i just looked - Andrew 01:07 1/23/2002 (2)
      - Thanks, isint there a metal and plasitc difference - adam p 01:12 1/23/2002 (1)
        
        No plastic impeller on the S14 water pump. (m) - John A 01:30 1/23/2002 (0)
  - Re: colant on garage floor. anyone replaced the ?? - Andrew 00:33 1/23/2002 (0)
F.S. Ellipsoids with 9005 conversion. - rIChie 23:41 1/22/2002 (0)
Can't reveal OBC hidden functions! Help! - Kelvin. 22:58 1/22/2002 (1)
- 3 1.3TYP is your ECU code version (nt) - michael 10:20 1/23/2002 (0)
Car Care Products (url) - Melissa 22:16 1/22/2002 (0)
for an M3 - Lookin 21:59 1/22/2002 (2)
- what about the 95 e36 M3?? N/M - Scott 325i 09:30 1/23/2002 (0)
- 1992 to 1996? There are no M3`s sold in U.S....... - John A 22:14 1/22/2002 (0)
Looking for M3 - Looker 21:51 1/22/2002 (2)
- Average price for a 1995 E36 M3 w/ under 100K..... - John A 22:17 1/22/2002 (0)
- Re: Looking for M3 - BASEM 22:03 1/22/2002 (0)
Need a header for my 1988 M3, any ideas???? - Jose Perez 21:13 1/22/2002 (3)
- Re: Need a header for my 1988 M3, any ideas???? - Mike K. 09:31 1/23/2002 (1)
  - Re: Need a header for my 1988 M3, any ideas???? - Jose Perez 22:54 1/23/2002 (0)
- Re: Need a header for my 1988 M3, any ideas???? (url) - Angus 21:44 1/22/2002 (0)
Best Place to get wheels refinished - Dave 20:22 1/22/2002 (3)
- Re: Best Place to get wheels refinished (url) - Pat Chiang 20:47 1/22/2002 (2)
  - Thanks Pat - Dave 21:13 1/22/2002 (1)
    - No problem. (eom) (nt) - Pat Chiang 02:44 1/23/2002 (0)
M3 compression ? - JERSEYJIM 19:38 1/22/2002 (6)
- I have a 11:1 m-10 with ~200 psi (nt) - michael 09:42 1/24/2002 (0)
- Re: No more than 10% variation is critical. - eric_m3 08:36 1/24/2002 (0)
- Re: M3 compression ? (url) - MarkPike 20:39 1/22/2002 (3)
  - Re: M3 compression ? (url) - Angus 22:00 1/22/2002 (2)
    - Look at the first puff. (nt) - adrian 17:35 1/23/2002 (0)
    - Look at the first puff. (url) - adrian 17:34 1/23/2002 (0)
NE1 using Bilsteins sport shocks w/stock springs? - BEAME2MYE 17:43 1/22/2002 (3)
- Re: really NOT fine - eric_m3 09:05 1/24/2002 (0)
- Re: Yes it works fine........ - HANDBLT 17:45 1/22/2002 (1)
  - Thanks!!! Just what I needed to hear! - BEAME2MYE 21:40 1/22/2002 (0)
Good buy? - euro_323i 16:14 1/22/2002 (2)
- Re: Good buy?$5K is a junk price in the U.S. (m) - John A 22:03 1/22/2002 (0)
- 5K sounds like a good price. - Mpower 21:49 1/22/2002 (0)
NE1 had experience with AEZ wheels? - '88 2.5L 15:30 1/22/2002 (3)
- i looked into Radons - no longer sold in US>>>>>. - EricH 17:18 1/22/2002 (2)
  - How is their quality? (nt) - '88 2.5L 20:35 1/22/2002 (1)
    - no se amigo. (nt) - EricH 10:48 1/23/2002 (0)
Mobil1 oil? (more) - DarranP 13:44 1/22/2002 (25)
- me four - Damian 19:32 1/22/2002 (0)
- Cheers guys (more) - DarranP 17:49 1/22/2002 (0)
- The reason is the tensioner... - Jeff J. 16:13 1/22/2002 (3)
  - Re: The reason is the tensioner... - DArren M 19:22 1/22/2002 (2)
    - The owners manual says to use 15W40 or............ - John A 21:59 1/22/2002 (1)
      - Run thinner oil = no problem IMHO - Stan 07:45 1/23/2002 (0)
- Re: Mobil1 oil? (more) - Darren M 14:24 1/22/2002 (1)
  - Re: Mobil1 oil? (more) - Roops 04:24 1/23/2002 (0)
- Mobil Delvac1 (url) - Michael P 14:10 1/22/2002 (0)
- Re: Mobil1 oil? (more) - Jon 14:10 1/22/2002 (10)
  - I know which article said that....... - Derin 14:49 1/22/2002 (9)
    - there's 3k miles and then there's 3k miles - Michael P 16:26 1/22/2002 (0)
    - Re: I know which article said that....... - Jon 15:32 1/22/2002 (7)
      - Yep....I've been using Mobil 1 too.... - Derin 16:53 1/22/2002 (5)
        
        A good synthetic is cheap ! - Age P 17:11 1/22/2002 (0)
        
        Admittedly marketing hype but... - Jon 17:07 1/22/2002 (3)
        
        Correction... - Jon 17:09 1/22/2002 (2)
        
        I've seen that BMW engine disassembled.. - Stan 07:50 1/23/2002 (0)
        
        Yep Jon...I have that Million Mile article too.... - Derin 17:18 1/22/2002 (0)
      - JON . . . - adam p 15:40 1/22/2002 (0)
- I only use Mobile 15W 50! (nt) - MAGNUS 14:02 1/22/2002 (4)
  - Me too (nt) - Zach Hadley 14:30 1/22/2002 (3)
    - Re: Me too (more) - John A 16:31 1/22/2002 (1)
      - bmw motors are cleanest out there - Angus 22:22 1/22/2002 (0)
    - Re: Me three !!! - RandyM3/M5 15:22 1/22/2002 (0)
WARNING NO GROUP BUY ON EVO BELTS! - Magnus 13:10 1/22/2002 (5)
- Re: 300-370$ is a good price.... - Markus 16:17 1/22/2002 (0)
- Re: WARNING NO GROUP BUY ON EVO BELTS! - Barry Robinson 15:57 1/22/2002 (3)
  - Okay maybe I shouldn't speak for everyone - MAGNUS 17:23 1/22/2002 (2)
    - Re: Okay maybe I shouldn't speak for everyone - Barry Robinson 18:05 1/22/2002 (1)
      - They quoted $93 each just for me...... - Magnus! 18:58 1/22/2002 (0)
24 Hours of Daytona - Smooth is Quik 12:07 1/22/2002 (0)
Recaro SR seats - Jeff 11:54 1/22/2002 (5)
- Re: Recaro SR seats (pic) - MarkPike 12:45 1/22/2002 (4)
  - Seat belt question... - michael 12:49 1/22/2002 (3)
    - Re: Seat belt question... - MarkPike 14:41 1/22/2002 (2)
      - I would not change how the belts mount (M) - adam p 14:44 1/22/2002 (1)
        
        There is a mounting point on the brackets - Dave 15:23 1/22/2002 (0)
wheels - suggestions - simon mac 10:37 1/22/2002 (8)
- Re: wheels - suggestions - simon mac 05:29 1/23/2002 (0)
- Re: wheels - suggestions - Dinan M3 22:57 1/22/2002 (0)
- Re: wheels - suggestions - DarranP 13:31 1/22/2002 (0)
- Re: wheels - suggestions - Roops 12:05 1/22/2002 (0)
- Re: wheels - suggestions - Parrothead 11:01 1/22/2002 (2)
  - What size tires are you using?nt - SALD 15:29 1/22/2002 (1)
    - 235/40 rear, 215/40 front - Parrothead 21:38 1/22/2002 (0)
- Re: wheels - suggestions - Parrothead 11:00 1/22/2002 (0)
WTB-Bilstein sports and any type of springs - tim ng 09:47 1/22/2002 (0)
anyone know where to get.... (url) (pic) - B. Wheaton 03:05 1/22/2002 (7)
- ~B,I got U covered. The e30 trunk organizer part#: - LV (OO=[][]=OO) 12:09 1/22/2002 (3)
  - Re: ~B,I got U covered. The e30 trunk organizer pa - Chris Chow, DBMWN2ZS 15:29 1/23/2002 (0)
  - Those might not fit the M3... - Jon 13:14 1/22/2002 (0)
  - Tell us what they find/quote? (nt) - MAGNUS 12:29 1/22/2002 (0)
- I do... (url) (pic) - Jon 11:47 1/22/2002 (0)
- Get a generic sun screen and stick on letters (nt) - michael 09:14 1/22/2002 (0)
- In a BMW dealer? I seen these on the ETK CD too. (nt) - Attila 06:54 1/22/2002 (0)
NEED VIN Sticker Help for drivers door pillar - Ari 00:53 1/22/2002 (2)
- Re: NEED VIN Sticker Help for drivers door pillar - David Boen 04:26 1/23/2002 (1)
  - Re: NEED VIN Sticker Help for drivers door pillar - Fred Larimer 11:40 1/27/2002 (0)
e30 m3 average pricing - rayan 00:33 1/22/2002 (2)
- $5k -$20k miles & condition dependent