bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 08

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 08
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

jim tappen & gary dees, nice meeting u guys....... - john///m3 23:50 3/03/2002 (1)
- It was my pleasure (nt) - Gary 88 Lachssilber 19:50 3/04/2002 (0)
16x7 frnt, 16x8 rears, need tire help please - Josh 23:34 3/03/2002 (2)
- Re: 16x7 frnt, 16x8 rears, need tire help please - R.P.Askov 03:24 3/04/2002 (1)
  - Don't 205/50 rub on the inner plastic?-205/45? (nt) - Jim 12:47 3/04/2002 (0)
Tire width - sneedster 23:03 3/03/2002 (1)
- Re: Tire width - ROB89M3 23:40 3/03/2002 (0)
white car on harbor blvd. sun am southbound (nt) - zak 22:51 3/03/2002 (0)
Anyone need a complete gray interior??????? - HANDBLT 21:15 3/03/2002 (1)
- Re: Yes, please give details - Steve 09:57 3/04/2002 (0)
Would like to find an M3 near charlston - Bob85 635 20:37 3/03/2002 (0)
Post pictures of your car - M35power 19:44 3/03/2002 (18)
- 88 Zinnoberrot - C///MR 20:14 3/04/2002 (1)
  - oopps ! here (pic) - C///MR 20:16 3/04/2002 (0)
- Early Henna. (pic) (nt) - Keith in Seattle 13:43 3/04/2002 (0)
- over 1000 pic�s - R.P.Askov 03:20 3/04/2002 (0)
- '91 Brilliant Red (pic) (nt) - Phil 00:29 3/04/2002 (1)
  - (#2) '91 Brilliant Red (pic) - Phil 00:34 3/04/2002 (0)
- follow the kink (url) - john///m3 00:14 3/04/2002 (0)
- Click the Pic - KevinS 22:58 3/03/2002 (1)
  - Lets try that again... (url) (pic) - KevinS 23:01 3/03/2002 (0)
- Re: Post pictures of your car (pic) (nt) - HANDBLT 21:14 3/03/2002 (0)
- Re: Post pictures of your car (url) - ROB89M3 20:58 3/03/2002 (0)
- Here you go... (pic) - ADA///M 20:53 3/03/2002 (0)
- pic 1 (pic) - DArren M 20:20 3/03/2002 (4)
  - Nice seats!!! (nt) - EricH 12:12 3/04/2002 (0)
  - Re: pic 2 (pic) - DArren M 20:20 3/03/2002 (2)
    - Re: pic 2 - Estar 19:22 3/04/2002 (1)
      - Re: pic 2 - Darren M 08:16 3/05/2002 (0)
- Re: Post pictures of your car (url) - MichaelH 19:55 3/03/2002 (0)
Recent buyers, what'd you pay for your E30 M3? - Frank K 16:38 3/03/2002 (26)
- 89, 123k, clean, $10,700 - JDM3 17:19 3/04/2002 (0)
- Seattle, 5/01, '90, 71k miles, $12.5k + cool stuff (nt) - Erik Brannfors - Seattle M3 15:54 3/04/2002 (0)
- 88, 84,xxx mi, 1 year ago in Boston area>>> - EricH 12:47 3/04/2002 (0)
- $7600 for 88 with 226K miles and spares - Phil-OR 12:31 3/04/2002 (0)
- Re: Recent buyers, what'd you pay for your E30 M3? - Eric 10:17 3/04/2002 (0)
- Re: Recent buyers, what'd you pay for your E30 M3? - rob 00:55 3/04/2002 (0)
- Looked at (m) - TUD 23:02 3/03/2002 (0)
- In Jan, 1990 56K $13.7 10/10 No Track, Stock (nt) - Drew_Houston 21:35 3/03/2002 (0)
- I bought two in the last 6 months...... - Randy '90M3/'85 euro M5 20:47 3/03/2002 (0)
- Re: Recent buyers, what'd you pay for your E30 M3? - Drew 19:08 3/03/2002 (0)
- Re: Recent buyers, what'd you pay for your E30 M3? - Charley 18:52 3/03/2002 (2)
  - just keep rubbing that $7900 in our faces - scrv1 18:55 3/03/2002 (1)
    - Got 88 M3 w/77K for $7800, car was just neglected - Barry Robinson 17:10 3/04/2002 (0)
- '88 M3, 140k miles - Bry 18:31 3/03/2002 (1)
  - Dangit, double post... - Bry 18:32 3/03/2002 (0)
- '88 M3, 140k miles - Bry 18:31 3/03/2002 (0)
- Re: Recent buyers, what'd you pay for your E30 M3? - Billy Ray (formerly parrothead) 18:03 3/03/2002 (1)
  - That's in line w/ what I'm seeing - Frank K 18:13 3/03/2002 (0)
- In the past 2 years, prices have almost doubled. - Lee 17:58 3/03/2002 (0)
- Market Value.......... - HANDBLT 17:12 3/03/2002 (6)
  - That car would be advertised for $15k today! - Frank K 17:40 3/03/2002 (5)
    - asking price and what it is worth are different (nt) - Bruce 22:43 3/03/2002 (1)
      - Very true. - TUD 23:30 3/03/2002 (0)
    - No, but....... - HANDBLT 17:49 3/03/2002 (2)
      - Sorry, YES(deal), No($)....... - HANDBLT 17:50 3/03/2002 (1)
        
        Details on M Cars in SC - Andrew 13:30 3/04/2002 (0)
Stolen E30 M3 convertible - Gavin Jones 16:28 3/03/2002 (2)
- Re: Stolen E30 M3 convertible - DarranP 16:49 3/03/2002 (1)
  - Another reason to get LOJACK http://www.lojack.com - B. Wheaton 17:41 3/03/2002 (0)
any1 have a set of 15in. or larger 4 lug 4 sale? - MKM3 15:31 3/03/2002 (0)
M3 exhaust - Geoff 15:24 3/03/2002 (1)
- Re: M3 exhaust - GilesL 05:10 3/04/2002 (0)
vlksdragon, a few of us e30 m3 owners r meeting... - john///m3 14:00 3/03/2002 (0)
Do you know where to buy DVD/VHS E30 M3 DTM vids? - Nizzle 11:58 3/03/2002 (4)
- Duke Video, I bough 87-91 DTM videos from them (nt) - m325ix/88m3 16:23 3/03/2002 (3)
  - Re: what is the product code? - Nizzle 19:02 3/03/2002 (2)
    - hmm....i will have to look it up for u (nt) - m325ix/88m3 08:01 3/04/2002 (1)
      - Re: email me if u find it. thanks - Nizzle 18:49 3/04/2002 (0)
M3 fast? Check this out... (url) - Ed 11:34 3/03/2002 (3)
- someone violate copyright and post. :) (nt) - george 12:53 3/03/2002 (2)
  - And post Nixon tapes too! (nt) - HJ//M3 15:51 3/03/2002 (1)
    - Red Light Illuminates On HJ//M3's Skull. (nt) - *Censored* 22:46 3/03/2002 (0)
gas slotted rotors? - B. Wheaton 10:56 3/03/2002 (6)
- Checked Ultimate Garage?? (nt) - Doug 17:04 3/04/2002 (0)
- Korman sells slotted factory rotors to order..... - zak 10:38 3/04/2002 (0)
- Re: gas slotted rotors? - Anthony 88 ///M3 09:55 3/04/2002 (0)
- Re: gas slotted rotors? - Grant 14:16 3/03/2002 (0)
- Re: Don't do Zimmerman unless...... - eric_m3 11:15 3/03/2002 (0)
- Re: gas slotted rotors? - Jose Perez 11:09 3/03/2002 (0)
Crankshaft nut size? - James C. 09:03 3/03/2002 (2)
- Re: Crankshaft nut size? - Mikey B 12:55 3/03/2002 (0)
- Yes, it is a size 36MM - MIKE NO E30 M3 12:23 3/03/2002 (0)
I have just joined the M3 club - S Bean 08:09 3/03/2002 (8)
- Rust repair.. - Doug 17:01 3/04/2002 (0)
- Re: I have just joined the M3 club - rs 01:11 3/04/2002 (1)
  - Re: I have just joined the M3 club - S Bean 09:59 3/04/2002 (0)
- Possible Red Flag. - george 12:44 3/03/2002 (3)
  - Re: Possible Red Flag. - S. Bean 15:24 3/03/2002 (1)
    - Not an insult! My post looks like I was drunk! (nt) - george 22:42 3/03/2002 (0)
  - can you say: proofread? *sigh* (nt) - george 12:48 3/03/2002 (0)
- Re: Flip a coin and go from there.. Just Kidding! - eric_m3 11:20 3/03/2002 (0)
1987 M3 Evo 1 - stereo install - Juzzie Wuzzie 04:09 3/03/2002 (0)
I NEED A PASS. FENDER.. - scrv1 03:27 3/03/2002 (0)
vibration - Jeff S 20:55 3/02/2002 (0)
Part number for E30M3 ANtenna? Please (nt) - HJ//M3 20:41 3/02/2002 (1)
- Antenna p/n 65 22 1 386 412 (m) - TUD 06:56 3/03/2002 (0)
Looking to Buy an E30 M3... E-mail me any offers - Chris B 20:31 3/02/2002 (1)
- Re: nice one on ebay - dee 21:02 3/02/2002 (0)
hey adam p. - C///MR 19:20 3/02/2002 (1)
- haha.. if i only had a women to use it on!! - adam 21:08 3/02/2002 (0)
Best way to clean an engine? - S Bean 19:11 3/02/2002 (2)
- "Mist"er....... "Mist"er........!!! (pic) - D///M3 20:09 3/02/2002 (1)
  - Use Simple Green cleaner, nice and safe and strong (nt) - HJ//M3 20:12 3/02/2002 (0)
Real Racing on SpeedChannel tonight . F1 Austriala - C///MR 19:10 3/02/2002 (1)
- We can only hope that... - Jon 19:50 3/02/2002 (0)
BMW Meet 3/9 @ F1 Boston - Nick-NY 18:10 3/02/2002 (2)
- Looks like an AWSOME facility!!! - SALD 20:04 3/02/2002 (1)
  - You mean who's the lightest driver:) (nt) - J.M3 23:49 3/02/2002 (0)
Anyone remove center support? - Phil-OR 17:10 3/02/2002 (4)
- Re: Anyone remove center support? - C///MR 18:51 3/02/2002 (0)
- Re: Anyone remove center support? - C///MR 18:51 3/02/2002 (2)
  - Re: Anyone remove center support? - Phil-OR 00:06 3/03/2002 (1)
    - Special tool is a puller. You`ll probably ........ - John A 01:39 3/03/2002 (0)
Anyone selling an E30 M3... Please contact - Chris Boutsikos 17:03 3/02/2002 (2)
- Here is nice one my friend is selling (url) - MarkPike 17:17 3/02/2002 (1)
  - Here is the correct link (url) - MarkPike 17:18 3/02/2002 (0)
Some suspension questions - jeffNJ87325ic 16:40 3/02/2002 (2)
- Re: rear shock mount - Gordon L 19:02 3/02/2002 (1)
  - Thanks! - jeffNJ87325ic 20:15 3/02/2002 (0)
Ich m�chte Ihren Kopf blockieren! (nt) - The Interlocker 16:12 3/02/2002 (1)
- ??I would like to block your head! ?? (nt) - michael 11:45 3/03/2002 (0)
Strut mount nut - Rich 16:08 3/02/2002 (4)
- I used a 13/16" 6-point spark plug socket......... - John A 01:45 3/03/2002 (1)
  - Good idea, even better 3/4" 6 pt spark plug socket - Gordon L 13:48 3/09/2002 (0)
- use impact wrench...works great - wayne 18:56 3/02/2002 (0)
- Re: Strut mount nut - C///MR 18:15 3/02/2002 (0)
?s about Kosei K-1 Racing wheel in 16"... - Ken in NC 15:46 3/02/2002 (5)
- Re: ?s about Kosei K-1 Racing wheel in 16"... - ///MMike 16:18 3/02/2002 (4)
  - But you don't want 5mm spacers... - Jon 17:13 3/02/2002 (3)
    - 5mm spacers retain hubcentricity (more) - ///MMike 03:27 3/03/2002 (0)
    - My 5mms work w/no prob, but 10s are hubcentric! - Ken in NC 19:27 3/02/2002 (0)
    - 8mm + are all hubcentric!! others to small to be.. - adam 19:00 3/02/2002 (0)
likely a stupid question, but... - Billy Ray (formerly parrothead) 14:33 3/02/2002 (5)
- A couple of options... - Jon 14:59 3/02/2002 (4)
  - Shift Boot is round $55 for laaaaaaither (nt) - Magnus! 15:45 3/02/2002 (3)
    - Nope, great company does em on ebay for ~$30 - george 18:40 3/02/2002 (2)
      - Does it include the shift knob like the original? - SALD 20:07 3/02/2002 (1)
        
        No just the boot. (nt) - george 20:18 3/02/2002 (0)
Hawk HP vs PBR Metal Masters - B. Wheaton 14:00 3/02/2002 (5)
- Re: Ahhh the old tried and true Metal master..... - eric_m3 16:26 3/02/2002 (4)
  - I ran Porterfields last set, Mintex now (more) - Ken in NC 19:30 3/02/2002 (3)
    - Re: You probably ran R4S right? - eric_m3 11:22 3/03/2002 (2)
      - R4S, with a modified cooling set-up, yes (nt) - Ken in NC 09:19 3/04/2002 (1)
        
        Re: he would be better off w/ R4 for street autoX - eric_m3 11:34 3/06/2002 (0)
Black smoke during high-rpm shifts - Need help - Gary 88 Lachssilber 13:22 3/02/2002 (7)
- Re: Black smoke during high-rpm shifts - Need hel - widim3 16:39 3/03/2002 (0)
- For the sake of you engine... - michael 11:49 3/03/2002 (1)
  - err...oil not iol (nt) - michael 11:50 3/03/2002 (0)
- I think we all run a little rich-black smoke..... - SALD 20:09 3/02/2002 (0)
- that's where sooty tail comes from... - C///MR 19:07 3/02/2002 (2)
  - Thanks. actually it only happens once in a while (nt) - Gary 88 Lachssilber 19:19 3/02/2002 (1)
    - mine too! 8^).... - C///MR 19:22 3/02/2002 (0)
M3 service manual whats best? - S. Bean 08:38 3/02/2002 (4)
- Re: Try the link (url) (nt) - eric_m3 16:27 3/02/2002 (3)
  - Maybe I should buy one, copy and sell on ebay too - B. Wheaton 20:37 3/02/2002 (2)
    - Re: Maybe I should buy one, copy and sell on ebay - Mikey B 07:45 3/03/2002 (1)
      - http://www.zionsvilleautosport.com/store/shop.mv - Drew_Houston 21:40 3/03/2002 (0)
air inlet box with control f.s. - AL 08:06 3/02/2002 (0)
I got a325isa Cheap does anyone have parts 4/s (nt) - MKM3 07:08 3/02/2002 (1)
- im parting out a 89 and sell new parts, email me - jeffNJ87325ic 09:23 3/02/2002 (0)
B&B tri-flo muffler with dtm tips 4 sale - john///m3 03:52 3/02/2002 (1)
- You've got mail - Barry Robinson 13:01 3/02/2002 (0)
M COntours on Ebay. Who was looking for them? - Magnus! 01:16 3/02/2002 (1)
- Re: M COntours on Ebay. Who was looking for them? (url) (nt) - Magnus! 01:17 3/02/2002 (0)
What does the basic stock M3 run in 1/4 mile? thx. (nt) - Rob '89 325i Calgary 21:59 3/01/2002 (4)
- Road and Track got 15.4 @ 91 mph - Randy Walters 09:24 3/02/2002 (0)
- BMW says 15.7 out of the box (pic) - MarkPike 22:33 3/01/2002 (2)
  - but we have seen times as low as 14.2 from mods.. - adam 22:34 3/01/2002 (1)
    - Cool, thanks very much guys. - Rob '89 325i Calgary 22:43 3/01/2002 (0)
What does the basic stock M3 run in 1/4 mile? thx. (nt) - Rob '89 325i Calgary 21:59 3/01/2002 (0)
Help with hub swap - Jim 21:38 3/01/2002 (1)
- SCCA stock means STOCK email me (more) (url) - michael 11:59 3/03/2002 (0)
225/45/ZR16 almost new $40 each NYC area (nt) - patms 19:53 3/01/2002 (0)
Bimmer Meet Sebring Mar. 2-3 - Mel A 19:33 3/01/2002 (0)
Anyones big end shells died. - Mikey B 18:55 3/01/2002 (1)
- Re: Anyones big end shells died. - Angus 09:37 3/06/2002 (0)
Another forum! - Mikey B 18:49 3/01/2002 (0)
ANGEL EYES at Ebay in England (url) (nt) - Levio 18:12 3/01/2002 (3)
- Buyer pays the actual postal & ebay fees ! HAHAHA (nt) - Magnus! 20:17 3/01/2002 (0)
- Buyer pays the actual postal & ebay fees ! HAHAHA (nt) - Magnus! 20:17 3/01/2002 (1)
  - Shipping will costs around $30.00 - Jose Perez 21:09 3/01/2002 (0)
Help,why running so rough - Morris 17:59 3/01/2002 (2)
- Re: Pull plugs and check for fouling to start - eric_m3 19:27 3/01/2002 (0)
- Re: Help,why running so rough - Mikey B 18:51 3/01/2002 (0)
4.10 diff for sale - rob 17:59 3/01/2002 (0)
Carfax request... - Doug G 17:44 3/01/2002 (3)
- Carfax request - TUD 18:42 3/01/2002 (2)
  - Thanks, TUD!!!!! - Doug G 19:05 3/01/2002 (1)
    - Your welcome. - TUD 20:47 3/01/2002 (0)
TSW Hockenheim R on M3, post pics please... - Roderick 17:01 3/01/2002 (0)
When exactly did US E30 M3 production start? - TUD 16:55 3/01/2002 (3)
- Korman received the first two cars in 1987 (url) - Mark 07:21 3/02/2002 (0)
- North Amercan spec - Dec. '86 (nt) - Jim 22:54 3/01/2002 (0)
- Anyone???? - TUD 21:10 3/01/2002 (0)
What do you think my Hartge wheels are worth? (pic) - Jeff E. 16:30 3/01/2002 (2)
- Pic isn't showing - Dave 11:45 3/02/2002 (1)
  - Sorry.....15x7's (nt) - Jeff E 10:13 3/04/2002 (0)
firing Order - Serg 16:28 3/01/2002 (3)
- Re: 1-3-4-2 (nt) - eric_m3 19:29 3/01/2002 (0)
- Does this help? (pic) - Jon 16:33 3/01/2002 (1)
  - Re: Does this help? (pic) - Serg 16:38 3/01/2002 (0)
215-45-17 Falkens, rubbing up front. Need Ideas>> - Bill 14:33 3/01/2002 (3)
- Re: running 205-45 on same set up, no rubbing - dee 20:53 3/01/2002 (0)
- Re: Should've gotten 215-40-17's (nt) - Dan 14:36 3/01/2002 (1)
  - dan is right. 215/40 17 is right tire (nt) - john///m3 21:14 3/01/2002 (0)
Coolant seep from top cap of radiator..... - Erik Brannfors - Seattle M3 13:51 3/01/2002 (4)
- Re: Coolant seep from top cap of radiator..... - Grant 14:31 3/02/2002 (0)
- Not the overflow tank, the plastic top of the rad. (nt) - Erik Brannfors - Seattle M3 16:53 3/01/2002 (0)
- Expansion tank,right.. - Doug 15:18 3/01/2002 (0)
- Re: Coolant seep from top cap of radiator..... - Grant 14:16 3/01/2002 (0)
What are the drawbacks to an 88 M3 vs other years? - James 12:02 3/01/2002 (29)
- Production Date versus Model Year - Pinecone 06:46 3/02/2002 (0)
- Summary: No BIG drawbacks... essentially same car. - Ron ///Man 12:56 3/01/2002 (3)
  - According to the 12/2001 ETK the offset - TUD 13:23 3/01/2002 (2)
    - They weren't... (more) - Jon 14:24 3/01/2002 (1)
      - True. I never thought about that. - TUD 14:59 3/01/2002 (0)
- Re: What are the drawbacks to an 88 M3 vs other ye - Bry 12:12 3/01/2002 (0)
- Re: What are the drawbacks to an 88 M3 vs other ye - Phil-OR 12:10 3/01/2002 (22)
  - Henna Red and Pearl Beige were only(m) - TUD 12:28 3/01/2002 (0)
  - NONONO....offset bushings started with 9/87....... - John A 12:23 3/01/2002 (0)
  - Re: What are the drawbacks to an 88 M3 vs other ye - James 12:18 3/01/2002 (19)
    - Yes, you can install aluminum control arms (m) - John A 12:32 3/01/2002 (7)
      - Re: Aluminum control arm stronger then Steel ? - AC 13:26 3/01/2002 (4)
        
        The ball joints on the aluminum arms are.......... - John A 20:27 3/01/2002 (0)
        
        Re: No such thing as an offset control arm... - eric_m3 19:33 3/01/2002 (2)
        
        Re: Well what is the recommendation for street use - AC 02:26 3/02/2002 (1)
        
        Re: Aluminum will give much better ride comfort - eric_m3 16:29 3/02/2002 (0)
      - I got a quote from BMA and you can get(m) - TUD 12:35 3/01/2002 (1)
        
        bimmerworld still has them for $159... - Jon 14:18 3/01/2002 (0)
    - Yes, I believe so. - TUD 12:31 3/01/2002 (10)
      - I have an '89, production date was 9/88 and... - Vince 14:09 3/01/2002 (9)
        
        Re: I have an '89, production date was 9/88 and... - JPL 17:46 3/01/2002 (0)
        
        my '88 has an 87 production date - Pizza! 16:29 3/01/2002 (0)
        
        My '90 has a production date of 7/89 ??!! - RandyM3/M5 14:34 3/01/2002 (6)
        
        Vin # - Randy '90M3/'85 euro M5 18:11 3/01/2002 (2)
        
        Re: Vin # (pic) - Randy Walters 18:50 3/01/2002 (1)
        
        Cool,good lookin' out !!! - Randy '90M3/'85 euro M5 07:32 3/03/2002 (0)
        
        Re: So what's up with that????? - Vince 16:30 3/01/2002 (1)
        
        Model year is VIN# (nt) - Jeff E 16:51 3/01/2002 (0)
        
        my 90 also is 7/89... (nt) - Jeff E 14:45 3/01/2002 (0)
Conforti chip - SteveS 11:31 3/01/2002 (0)
Bryan, look below for Carfax. (nt) - TUD 10:25 3/01/2002 (2)
- Thank you TUD!!!!!!!! - Bryan 12:06 3/01/2002 (1)
  - You're welcome. - TUD 12:32 3/01/2002 (0)
E36 M3 tensioner #11 31 1 405 081 correct part# :M - LV (OO=[][]=OO) 09:57 3/01/2002 (3)
- It's 11 31 1 405 081 , for the 3.2 (I believe) vs. - Jeff E 10:00 3/01/2002 (2)
  - Re: It's 11 31 1 405 081 , for the 3.2 (I believe) - Matt S 15:52 3/01/2002 (1)
    - Thx Guys !!! (nt) - LV (OO=[][]=OO) 13:09 3/02/2002 (0)
Stock Wheels F/S (pic) - Phil 01:42 3/01/2002 (2)
- Guy in Westminster please contact me - Phil 21:31 3/01/2002 (0)
- Here's the pic (pic) - JamesM 04:31 3/01/2002 (0)
My M3 - Phil 22:25 2/28/2002 (10)
- Another member for Club RX... (url) (pic) - Jon 14:30 3/01/2002 (0)
- Re: My M3 - KevinS 07:16 3/01/2002 (0)
- #2 (pic) - Phil 22:27 2/28/2002 (7)
  - LOL - john 12:41 3/01/2002 (3)
    - Re: LOL (pic) - MarkPike 13:42 3/01/2002 (2)
      - Here' another veiw (pic) (nt) - Phil 13:58 3/01/2002 (1)
        
        Great photoshop job! ;-) (nt) - Pizza! 14:52 3/01/2002 (0)
  - ouuuuu...shinny! (nice) (nt) - michael 10:17 3/01/2002 (0)
  - cant have spaces in the names of your files.. - adam 22:59 2/28/2002 (1)
    - works fine in Internut Exploder 6 - MarkPike 07:37 3/01/2002 (0)
Ground Control Coilover Group buy Details !!! - Nick-NY 20:51 2/28/2002 (8)
- ???? - Angus 21:47 2/28/2002 (3)
  - No, they mount in the stock spring position - JamesM 04:37 3/01/2002 (0)
  - I got it on my car... - Mike 23:39 2/28/2002 (1)
    - Re: I got it on my car... - Angus 09:46 3/01/2002 (0)
- Re: Ground Control Coilover Group buy Details !!! - B. Wheaton 21:20 2/28/2002 (2)
  - that is the price NOT including shocks. - Nick-NY 21:51 2/28/2002 (1)
    - So incl 4 Konis it's $1233+ Where are the savings? (nt) - B. Wheaton 01:10 3/01/2002 (0)
- BTW i need your orders by 3/17 - Nick-NY 20:52 2/28/2002 (0)
Anybody that works for a BMW dealership on this fo (nt) - adrianM/// 20:40 2/28/2002 (1)
- Re: Anybody that works for a BMW dealership on thi - Paul L 16:32 3/03/2002 (0)
supersprint vs borla - roel 20:30 2/28/2002 (2)
- Re: supersprint vs borla - Angus 22:18 2/28/2002 (0)
- Re: supersprint vs borla - ptdaniel 21:40 2/28/2002 (0)
BPS Internatonal in Champlain, NY. Opinons? - Denis 19:49 2/28/2002 (0)
1988 M3, anyone with 17 x 8's in front or larger? - Bart 19:41 2/28/2002 (8)
- I have 17 X 8 w/ 225-40-17 (nt) - David 15:06 3/01/2002 (0)
- 88`s made after 9/87 had the offset bushings...... - John A 21:58 2/28/2002 (0)
- Re: 1988 M3, anyone with 17 x 8's in front or larg - John A 21:47 2/28/2002 (0)
- Re: 1988 M3, anyone with 17 x 8's in front or larg - 88DinanM3 20:14 2/28/2002 (0)
- Re: 1988 M3, anyone with 17 x 8's in front or larg - Tony 19:53 2/28/2002 (2)
  - Re: 1988 M3, anyone with 17 x 8's in front or larg - Jose Perez 20:24 2/28/2002 (0)
  - i have 18/8 on my 87.. - adam 20:02 2/28/2002 (0)
- I have an 88 M3 with 17x8 235/40/17 up front (eom) - Barry Robinson 19:49 2/28/2002 (0)
Front seal removal - Tony 18:26 2/28/2002 (4)
- Re: Front seal removal - Gary H 06:01 3/01/2002 (0)
- Re: Front seal removal - jefrem 19:09 2/28/2002 (2)
  - pulley nut/bolt - Angus 21:25 2/28/2002 (0)
  - thanks Jefrem, its the front crank seal. The - Tony 19:52 2/28/2002 (0)
e30 m3 right front strut housing. - mazen 18:24 2/28/2002 (2)
- e-mail me, I have a pair for sale - tim ng 10:38 3/01/2002 (0)
- Re: e30 m3 right front strut housing. - e30 V8 19:28 2/28/2002 (0)
Another sighting today! - eric_m3 18:16 2/28/2002 (0)
Southern UK meet this saturday - DarranP 17:58 2/28/2002 (0)
FS: 1988 M6, Mint, San Jose, CA (url) - Jack S. 17:41 2/28/2002 (0)
FS: 1998 M6, Mint, San Jose, CA (url) - Jack S. 17:41 2/28/2002 (0)
FS: 1990 M3 - 56K miles - ///M 17:27 2/28/2002 (1)
- Re: FS: 1990 M3 - 56K miles - AA 16:13 3/01/2002 (0)
Pleading a speeding charge down to... - Tom///m3 16:44 2/28/2002 (1)
- Ask for Deferred-judication ...(m) - Doug 10:31 3/01/2002 (0)
Perfect Girl-Driven '99 M3 Coupe for sale - Van 16:10 2/28/2002 (0)
WANTED M3 EVO 2 UPRATED DAMPERS AND SPRINGS UK (nt) - kevin 16:04 2/28/2002 (0)
Are the ETM's the same for all M3 production years - Jeff E. 15:40 2/28/2002 (3)
- Re: Are the ETM's the same for all M3 production y - jefrem 19:13 2/28/2002 (0)
- Re: Airbag is only significant difference really - eric_m3 18:04 2/28/2002 (0)
- Re: Are the ETM's the same for all M3 production y - Barry Robinson 16:47 2/28/2002 (0)
which intake is better:K&N cone or factory evo (nt) - dee 14:14 2/28/2002 (9)
- Re: which intake is better - MarkPike 18:58 2/28/2002 (1)
  - Re: Possibly true but..... - eric_m3 08:45 3/01/2002 (0)
- Re: REcent dyno info ion this subject revealed.... - eric_m3 18:08 2/28/2002 (0)
- EVO3 at speed acts as a ram air system. (nt) - michael 15:28 2/28/2002 (5)
  - Re: EVO3 at speed acts as a ram air system. - Barry Robinson 16:48 2/28/2002 (4)
    - Uses high pressure - Bry 18:48 2/28/2002 (2)
      - Re: Uses high pressure - Barry Robinson 19:13 2/28/2002 (1)
        
        It IS a ram system... - michael 10:21 3/01/2002 (0)
    - Very good point. (nt) - Jeff E 17:09 2/28/2002 (0)
Looking for E30 M3 - Stephen Hynes 14:05 2/28/2002 (2)
- Try here... (url) - Phil (UK) 18:09 2/28/2002 (0)
- Re: Looking for E30 M3 - Barry Robinson 16:56 2/28/2002 (0)
NE1 with a white M3 from Ventura/Santa Barbara (nt) - area? Jeff 13:58 2/28/2002 (2)
- I live in ventura .......... - zak 12:30 3/03/2002 (1)
  - saw white one on harbor in ven. 2day - zak 22:48 3/03/2002 (0)
Russell - Rally Sunseeker - DarranP 13:36 2/28/2002 (0)
FS: EVO2 rearwing (pic) - Markus 13:07 2/28/2002 (4)
- Have a darker pic? I can almost make this 1out. (nt) - michael 13:46 2/28/2002 (3)
  - Re:sorry i have only this one at the moment... - Markus 14:40 2/28/2002 (2)
    - Is it the wing with the lower section... - michael 15:30 2/28/2002 (1)
      - Re: Yes...this one here... (pic) - Markus 16:03 2/28/2002 (0)
MICHIGAN BMW MEET!! - Jaymzz 12:44 2/28/2002 (0)
Valve adjustment for S14 is it hard....... - I'm really a regular 88 M3 12:40 2/28/2002 (6)
- Re: Remeber that also you will need to adjust.... - eric_m3 18:12 2/28/2002 (0)
- Re: A little time consuming but not difficult... - eric_m3 18:10 2/28/2002 (0)
- When in doubt, go with Gustave..... (url) (nt) - Erik Brannfors - Seattle M3 12:42 2/28/2002 (3)
  - Erik - Have you tried this yourself ?? - I'm really a regular 88 M3 13:17 2/28/2002 (2)
    - I have....it`s not too bad. The main thing you ... - John A 14:26 2/28/2002 (0)
    - No. (nt) - Erik Brannfors - Seattle M3 14:14 2/28/2002 (0)
has anyone used Zymol car wax - David 87M3 12:05 2/28/2002 (3)
- good wax - darren j 00:57 3/01/2002 (0)
- Basicaly, as good as any IMHO, but... - michael 12:21 2/28/2002 (1)
  - Re: Basicaly, as good as any IMHO, but... - Anthony 88 ///M3 12:27 2/28/2002 (0)
Oil pressure sender for idiot light has O-ring? - eric_m3 11:52 2/28/2002 (2)
- Re: Oil pressure sender for idiot light has O-ring - RogerJ 19:42 2/28/2002 (0)
- There is no O-ring, a metal washer I believe.. (nt) - Doug 14:41 2/28/2002 (0)
Interesting Wheel Question True or False??? - David 11:47 2/28/2002 (2)
- Re: Interesting Wheel Question True or False??? - Barry Robinson 17:11 2/28/2002 (0)
- A few problems here - Dave 15:22 2/28/2002 (0)
buzzing shifter - Castle 10:41 2/28/2002 (2)
- Just beware it is labor intensive - Phil 12:51 2/28/2002 (0)
- check UUC website, they have the fix nt - Bill 11:37 2/28/2002 (0)
Racing Dynamics Chip, anyone has it - good? - Dan 09:55 2/28/2002 (2)
- Re: Racing Dynamics Chip, anyone has it - good? - ptdaniel 21:48 2/28/2002 (0)
- consensus seems to be Conforti as best one>> - Bill 11:31 2/28/2002 (0)
Looking for good price of Ignition wires(Instock)m - Magnus! 02:08 2/28/2002 (10)
- Re: Looking for good price of Ignition wires(Insto (url) - edro 12:22 2/28/2002 (0)
- Surprised Maxi's doesnt stock them, try Zygmunt>> - Bill 11:15 2/28/2002 (0)
- Eurasian - Anthony 88 ///M3 09:31 2/28/2002 (0)
- James Clay at Bimmerworld....they use (url) - Jeff E 09:27 2/28/2002 (3)
  - I got some... (more) - Jon 10:56 2/28/2002 (1)
    - I just ordered 8mm wires from Bimmerworld...(M) - Jeff E 11:11 2/28/2002 (0)
  - Looks like a good deal right now - Dave 10:29 2/28/2002 (0)
- Re: Bavarian Autosport w/ lifetime warranty in red - eric_m3 09:12 2/28/2002 (1)
  - I'll second the bavauto wires also & good price - Randy '90M3/'85 euro M5 17:58 2/28/2002 (0)
- GSPerformance.... - ADA///M 02:11 2/28/2002 (0)
CARFAX Help needed: WBSAK0309KAE33142 - Dave 01:16 2/28/2002 (1)
- Warning! Salvage/Junk (m) - TUD 01:24 2/28/2002 (0)
rear brake job - Grizzly 00:28 2/28/2002 (2)
- try www.racepad.com nt - Bill 11:16 2/28/2002 (0)
- Re: here is the juice on that... - eric_m3 09:14 2/28/2002 (0)
Can someone run this carfax for me! Thanks - Bryan 00:22 2/28/2002 (2)
- TUD can you help me out :) - Bryan 02:02 2/28/2002 (1)
  - Here you go. =) - TUD 10:23 3/01/2002 (0)
Can someone run a carfax for me m3? - Matt 23:24 2/27/2002 (2)
- accident, but clean - Eugene Lou 00:06 2/28/2002 (1)
  - Here's the e-mail report. - TUD 00:12 2/28/2002 (0)
E30 M3/S14 mechanic in Jacksonville, FL? - Doug G 23:15 2/27/2002 (2)
- Re: E30 M3/S14 mechanic in Jacksonville, FL? - Angus 21:27 2/28/2002 (1)
  - Nope - different car. - Doug G 22:57 2/28/2002 (0)
Ventura/Oxnard CA repair shop recommendation - Pete K 23:13 2/27/2002 (2)
- Re: Ventura/Oxnard CA repair shop recommendation - zak 23:51 2/27/2002 (1)
  - Re: Ventura/Oxnard CA repair shop recommendation - Peter K. 16:34 2/28/2002 (0)
F/S Stock E30M3 Rims - Phil 22:40 2/27/2002 (2)
- Re: F/S Stock E30M3 Rims (pic) - Phil 23:05 2/28/2002 (0)
- Re: F/S Stock E30M3 Rims How much? - Jose Perez 23:39 2/27/2002 (0)
cool shirts - Jeff S 22:39 2/27/2002 (0)
Blaupunkt Toronto on ebay. (url) - Eurojulien 318is 21:08 2/27/2002 (0)
Looking for a 2.5L engine. Best source or recom? - CliffS 19:45 2/27/2002 (5)
- Re: Looking for a 2.5L engine. Best source or reco - Peter Coke 09:37 3/02/2002 (0)
- Re: Ron Checca - ron-man@attglobal.net - eric_m3 09:17 2/28/2002 (0)
- Re: Cost and installation.... - Paul Daniel 09:06 2/28/2002 (0)
- Simple-Ron Checca-get the link from>> - Bill 22:52 2/27/2002 (1)
  - ron-man@attglobal.net - one in stock ready to go!! (nt) - AlD 10:04 2/28/2002 (0)
P?N for Evo Airbox? - TUD 18:40 2/27/2002 (10)
- Re: P?N for Evo Airbox? - John A 20:20 2/27/2002 (8)
  - Thank you. How much can I count on - TUD 22:06 2/27/2002 (7)
    - Why is it that p/n - TUD 00:01 2/28/2002 (6)
      - Why is it that p/n (more-correction) - TUD 00:02 2/28/2002 (5)
        
        330 is the lower airbox only... 331 is both....... - John A 01:12 2/28/2002 (4)
        
        Turner has the kit for $109. Motorsport Imports... - John A 01:36 2/28/2002 (3)
        
        Just need the lower, right? So Motorsport - TUD 01:54 2/28/2002 (2)
        
        Please look (m) - John A 14:41 2/28/2002 (0)
        
        You need the rubber support with the EVO airbox... - John A 14:36 2/28/2002 (0)
- P/N for Evo Airbox? - TUD 18:40 2/27/2002 (0)
Who's selling 18" rims on this board - Gary 88 Lachssilber 18:37 2/27/2002 (3)
- have a set of 18x8 bmw bbs wheels 4 sale.......... - john///m3 21:08 2/27/2002 (2)
  - John send me the pics (nt) - Gary 88 Lachssilber 22:39 2/27/2002 (0)
  - but issint me asking a fortune for htem?? - adam 22:20 2/27/2002 (0)
who has the best prices for Ground Control c/o's - Nick-NY 17:57 2/27/2002 (5)
- Just got them last month... (url) - Mike 11:11 2/28/2002 (0)
- Platinum Performance out of Rancho Cordova, CA - blu74tii 23:41 2/27/2002 (1)
  - do they have a website?(nt) - Nick-NY 07:25 2/28/2002 (0)
- they told me they have dealers (nt) - Nick-NY 19:19 2/27/2002 (0)
- think they are only sold direct nt - Bill 18:21 2/27/2002 (0)
decent parking rates in midtown NYC? attn: Magus? - TrueDrezzer 17:34 2/27/2002 (9)
- well......Wait a minute who the hell is Magus? - Magnus! 19:04 2/27/2002 (7)
  - thanks for the advince Magnus! - TrueDrezzer 22:18 2/28/2002 (0)
  - That's MR MAGNUS to you! haha > - Bill 22:54 2/27/2002 (0)
  - He's the world's weakest man! - YJ 20:20 2/27/2002 (4)
    - You mad no one answered your dumb pedal question? (nt) - HAHHAAAA at you! Magnus! 21:01 2/27/2002 (3)
      - HAHA didn't think you'd take it personally - YJ 23:50 2/27/2002 (2)
        
        NO! Just a joke as well. ;) (nt) - HAHHAAAA at you! Magnus! 00:36 2/28/2002 (1)
        
        It's all good cause I ain't no hater either! :) - YJ 02:08 2/28/2002 (0)
- No such thing! - leo 18:44 2/27/2002 (0)
Serious Buyer still looking for the right (more) - TUD 17:21 2/27/2002 (2)
- Re: Serious Buyer still looking for the right (mor - David Bates 09:38 3/01/2002 (0)
- check your email nt - Bill 18:22 2/27/2002 (0)
M3 glass electric motors %^&$&^%#, manual handle? - Jose Perez 17:20 2/27/2002 (1)
- Re: M3 glass electric motors %^&$&^%#, man - zak 23:57 2/27/2002 (0)
Euro 1990 E30 M3 pics (url) (pic) - B. Wheaton 17:02 2/27/2002 (2)
- mmmmmmm......nice! (nt) - m325ix/88m3 07:40 2/28/2002 (0)
- dig them groovy seats, baby? Also what wheels r > (pic) - Bill 17:13 2/27/2002 (0)
S14 motor - what's it worth? (UK) - Phil (UK) 16:51 2/27/2002 (5)
- S14 Engine...more info please... - MadKipper 12:55 3/02/2002 (1)
  - Re: S14 Engine...more info please... - Phil (UK) 14:03 3/05/2002 (0)
- Re: S14 motor - what's it worth? (UK) - Darren M 12:41 2/28/2002 (0)
- I bid 500 UK lbs (i will ship to USA) (nt) - michael 08:35 2/28/2002 (1)
  - UK500 - Generous, but... - Phil (UK) 18:12 2/28/2002 (0)
M3 spares for sales (UK) - M3bay 16:01 2/27/2002 (0)
Anyone know the part number for the cover that (pic) - Jeff E. 15:47 2/27/2002 (3)
- may be 13 53 1 308 677 (nt) - lago 17:46 2/27/2002 (1)
  - Re: may be 13 53 1 308 677...nope, that`s the .... - John A 20:29 2/27/2002 (0)
- Re: Anyone know the part number for the cover that - dave clark 16:43 2/27/2002 (0)
Good driver school brake pads? What do you guys - EricH 13:44 2/27/2002 (6)
- Performance Friction PF90 or Hawks Blue. EBC sucks (nt) - Lee 21:31 2/27/2002 (1)
  - Re: Watch the PF90's as they tend to leave... - eric_m3 09:20 2/28/2002 (0)
- Re: What group do you run? Where are you driving? - eric_m3 19:09 2/27/2002 (0)
- Re: Good driver school brake pads? What do you guy - Franklin 15:42 2/27/2002 (2)
  - Re: Good driver school brake pads? What do you guy - Mel 15:59 2/27/2002 (1)
    - HAWK HP from tire rack best price in town - Mel 16:00 2/27/2002 (0)
HELP! Need a good/honest mech South Bay Area (CA) - Rexman 13:43 2/27/2002 (5)
- Not in south bay but... - jay1 17:19 2/27/2002 (1)
  - Thanks! - Rexman 19:40 2/27/2002 (0)
- Re: HELP! Need a good/honest mech South Bay Area ( - FASTER3 13:53 2/27/2002 (2)
  - Re: HELP! Need a good/honest mech South Bay Area ( - Randy Walters 00:05 2/28/2002 (1)
    - Re: HELP! Need a good/honest mech South Bay Area ( - Thomas 89 325is 02:46 2/28/2002 (0)
Brandon or Jack S. - question on the (pic) - Jeff E. 13:34 2/27/2002 (6)
- I have a set of Gustaves sleeve clamps for sale... - Erik Brannfors - Seattle M3 16:41 2/27/2002 (0)
- Check out Gustave's site, I want those.. - Doug 15:18 2/27/2002 (2)
  - Yeah, I took a look at those, but from what I - Jeff E 15:22 2/27/2002 (1)
    - Correct..... (nt) - Erik Brannfors - Seattle M3 16:51 2/27/2002 (0)
- Re: Brandon or Jack S. - question on the - Jack S. 14:16 2/27/2002 (1)
  - Thanks Jack, I'll look into that. (nt) - Jeff E 14:52 2/27/2002 (0)
Shipping seats? - ///MBaller 13:10 2/27/2002 (11)
- i shipped seats for about 30 per at - adam 17:54 2/27/2002 (0)
- Fedex Ground is 25-30% cheaper than UPS (nt) - John A 14:59 2/27/2002 (5)
  - But if you use FedEx, they will not... - michael 15:22 2/27/2002 (4)
    - Re: But if you use FedEx, they will not... (pic) - MarkPike 15:55 2/27/2002 (3)
      - ...and you racked the server because? (nt) - michael 08:37 2/28/2002 (0)
      - Nice job on the servers! Did UPS charge U extra?nt - Bill 15:58 2/27/2002 (1)
        
        Re: Nice job on the servers! Did UPS charge U extr - MarkPike 16:03 2/27/2002 (0)
- Re: Shipping seats? - MarkPike 14:51 2/27/2002 (0)
- used modified wardrobe boxes - chris 14:09 2/27/2002 (2)
  - Read: - Jon K 14:24 2/27/2002 (1)
    - Thanks for the help (nt) - ///MBaller 18:45 2/27/2002 (0)
Any BMW 17's fit e30 M3 perfectly with no spacers? - Raymond 12:41 2/27/2002 (1)
- Some E34 wheels will fit w/o spacers - Barry Robinson 17:27 2/27/2002 (0)
Magnus, ? on your 18's??? - Bing 12:37 2/27/2002 (2)
- no spacers 18s. Just lil plastic rings that came! (nt) - Magnus 12:47 2/27/2002 (1)
  - Tire Size Magnus and wheel diameter?? - Bing 14:14 2/27/2002 (0)
control arm bushing - Tony 12:36 2/27/2002 (8)
- Re: You are talking about the control arm bushing? - eric_m3 19:13 2/27/2002 (2)
  - Thanks Eric, I ment the piece that holds - Tony 19:26 2/27/2002 (1)
    - Re: Remove it like I described in previous post. - eric_m3 09:23 2/28/2002 (0)
- Re: control arm bushing - Tony 18:35 2/27/2002 (0)
- Re: control arm bushing - Tony 18:34 2/27/2002 (0)
- Re: control arm bushing - Tony 18:34 2/27/2002 (0)
- here's what I've been told works.. - Doug 15:11 2/27/2002 (1)
  - Thanks Doug - Tony 18:37 2/27/2002 (0)
control arm bushing - Tony 12:36 2/27/2002 (0)
Again: US DOT Ellipsiods 4 sale..... - Erik Brannfors - Seattle M3 12:16 2/27/2002 (0)
Bry...we need to talk - Wofford 11:41 2/27/2002 (0)
DINAN emblems, don't know why PPL pay... - Ritchie Grove 11:39 2/27/2002 (11)
- The worst auction yet (url) - Sickboy 02:54 2/28/2002 (0)
- maybe i should get rid of my plates - Nick-NY 17:54 2/27/2002 (2)
  - Re: maybe i should get rid of my plates (url) - Gary H 12:02 2/28/2002 (0)
  - Re: maybe i should get rid of my plates (url) - Gary H 12:01 2/28/2002 (0)
- maybe i should get rid of my plates (pic) - Nick-NY 17:53 2/27/2002 (0)
- maybe i should get rid of my plates (pic) - Nick-NY 17:53 2/27/2002 (0)
- maybe i should get rid of my plates (pic) - Nick-NY 17:52 2/27/2002 (0)
- I agree! Just a stupid badge that turns your car - Jeff E 12:17 2/27/2002 (0)
- What's funy is that it's not the right font...... - Erik Brannfors - Seattle M3 12:14 2/27/2002 (2)
  - Re: PPL are WHOOPED!!! Mr. DINAN too! (nt) - Dan 12:33 2/27/2002 (0)
  - Re: What's funy is that it's not the right font... - Dan 12:32 2/27/2002 (0)
Wheel and Tire ???? - Dan 11:04 2/27/2002 (5)
- Spacers for sure... - ADA///M 11:52 2/27/2002 (4)
  - How did you do that....? - Paul Daniel 12:13 2/27/2002 (1)
    - Re: How did you do that....? - ADA///M 12:17 2/27/2002 (0)
  - Re: Spacers for sure... - Dan 12:06 2/27/2002 (1)
    - Not too many cheap places - ADA///M 12:18 2/27/2002 (0)
Floor mat replacement recommendations? - JPL 10:57 2/27/2002 (5)
- Dealer E36M3 mats fit well,got 'em in my '90M3. - RandyM3/M5 13:17 2/27/2002 (4)
  - I got grey,locks right in,fits in nicely. - Randy '90M3/'85 euro M5 07:14 3/03/2002 (0)
  - How much? Have the cutouts to hold in place? - Drew_Houston 13:55 2/27/2002 (0)
  - What color? Natural? - JPL 13:32 2/27/2002 (1)
    - the e36 floor mats fit with no prob? - Gerald Williams 14:04 2/28/2002 (0)
Announcing New Gauge Products! (url) (pic) - matt@gaugeman 09:57 2/27/2002 (0)
Short LRP vid - what did this guy do wrong, and >> (url) - EricH 08:36 2/27/2002 (11)
- Early apexes and correcting in the dirt!!!! - e30 V8 18:56 2/27/2002 (0)
- It was an awd subaru. I was next to him in the pad - stanley 12:28 2/27/2002 (1)
  - How well should you take wrecking your car? (url) - michael 13:17 2/27/2002 (0)
- He even has an open faced helmet on - Adam 12:17 2/27/2002 (1)
  - The better to be heard with. (nt) - michael 12:28 2/27/2002 (0)
- Re: Turned in WAAAAYY to early for climbing turn! - eric_m3 09:05 2/27/2002 (3)
  - And it took him forever to correct it!! - JamesM 10:16 2/27/2002 (2)
    - Re: To scared to correct it I think. - eric_m3 19:19 2/27/2002 (0)
    - Hang up and drive! - michael 10:34 2/27/2002 (0)
- Looks like he apexes too early, and... - michael 09:01 2/27/2002 (1)
  - ...and hava a REAL roll cage! (nt) - michael 10:11 2/27/2002 (0)
Help central locking - Adrian P 07:58 2/27/2002 (1)
- Re: Help central locking - David 87M3 08:25 2/27/2002 (0)
Head gasket job - Scott Bean 07:45 2/27/2002 (8)
- Re: Head gasket job - SteveS 13:13 2/28/2002 (0)
- DIY.... - ADA///M 13:53 2/27/2002 (4)
  - Don't even need new bolts... - Jon 14:01 2/27/2002 (3)
    - Im not too sure about that... - ///MBaller 17:55 2/27/2002 (2)
      - Re: Im not too sure about that... - Jon 19:47 2/27/2002 (1)
        
        OK i hear you... - ADA///M 02:16 2/28/2002 (0)
- Re: $1550 for a head gasket...that's about right - Paul Daniel 12:17 2/27/2002 (0)
- Re: Head gasket job - JPL 09:39 2/27/2002 (0)
Will a Standard BMW exhaust centre section..... - james 03:50 2/27/2002 (6)
- Re: Will a Standard BMW exhaust centre section.... - Adrian P 07:51 2/27/2002 (0)
- Re: Will a Standard BMW exhaust centre section.... - R.P.Askov 04:17 2/27/2002 (4)
  - Re: Will a Standard BMW exhaust centre section.... - Adrian P 07:53 2/27/2002 (3)
    - Re: Will a Standard BMW exhaust centre section.... - R.P.Askov 10:28 2/28/2002 (0)
    - I am about to buy a supersprint centre section.... - James 17:01 2/27/2002 (1)
      - Re: I am about to buy a supersprint centre section - Adrian P 07:05 2/28/2002 (0)
Can someone please run a CARFAX for me? - AA 03:17 2/27/2002 (0)
Can someone please run a carfax for me? - Matt 01:16 2/27/2002 (1)
- Here you go. - TUD 01:35 2/27/2002 (0)
Cam ?'s,,,,,Can I swap intake cam to exhaust side? - ADA///M 00:31 2/27/2002 (11)
- Thanks guys..... - ADA///M 11:47 2/27/2002 (0)
- NO NO NO NO NO!!!!! - michael 08:51 2/27/2002 (4)
  - YESYESYESYES!!!!!!!!!! It`s spelled Roundel and... - John A 20:47 2/27/2002 (1)
    - How can you mess up? - ADA///M 02:20 2/28/2002 (0)
  - Yes, they are the same, different cam GEARS - JamesM 10:17 2/27/2002 (1)
    - Oh...OK. (nt) - michael 10:35 2/27/2002 (0)
- It shouldn`t be necessary to adjust valve......... - John A 00:42 2/27/2002 (0)
- yes you will have too - adam 00:34 2/27/2002 (3)
  - Re: yes you will have too - ADA///M 00:45 2/27/2002 (2)
    - Re: Yes you can swap cams! Period! - eric_m3 09:13 2/27/2002 (1)
      - As long as I line them up with the gears.... - ADA///M 11:50 2/27/2002 (0)
3.2 motor and OBD1 conversion parts FS - the real Wofford 23:09 2/26/2002 (2)
- sent you email Chris, coming to TWS? (nt) - Eugene Lou 23:48 2/26/2002 (1)
  - TWS March 25th and 26th.... - the real Wofford 00:20 2/27/2002 (0)
Rear Bearings - Mark Meiser 23:06 2/26/2002 (6)
- Re: Rear Bearings - MaximuM3 21:51 2/27/2002 (2)
  - Re: Rear Bearings - Mark Meiser 05:39 3/01/2002 (1)
    - Re: Rear Bearings - MaximuM3 18:55 3/01/2002 (0)
- Get the tool, or let the pros do it. (nt) - michael 08:53 2/27/2002 (0)
- Re: Rear Bearings - John A 00:50 2/27/2002 (0)
- Re: Rear Bearings - Mark Meiser 23:07 2/26/2002 (0)
another rally video (url) - nicholas 22:57 2/26/2002 (1)
- real slow server! (nt) - michael 10:40 2/27/2002 (0)
2.7L E30 M20 engine - Mpower 22:36 2/26/2002 (7)
- 325e crank is cast (designed for low RPM) ........ - John A 00:57 2/27/2002 (0)
- Re: 2.7L E30 M20 engine - Danny 23:10 2/26/2002 (1)
  - Re: 2.7L E30 M20 engine - Mpower 23:18 2/26/2002 (0)
- I have the parts - the real Wofford 23:08 2/26/2002 (3)
  - Whatcha have? (nt) - Mpower 23:28 2/26/2002 (2)
    - what i have - the real Wofford 23:31 2/26/2002 (1)
      - Im lazy :) please just email me at - Mpower 04:04 2/27/2002 (0)
brake lites - Jeff S 22:24 2/26/2002 (3)
- I cruse in 5th, 2 3900 rpm (around 80 MPH) (nt) - michael 10:43 2/27/2002 (0)
- Re: brake lites - RogerJ 22:30 2/26/2002 (1)
  - Re: brake lites - Jeff 22:36 2/26/2002 (0)
VAC Motorsports in Philly...stuff looks awesome! (url) - Alvin Caragay '72 02 22:17 2/26/2002 (2)
- Did Doug get a hold of you? - Jon K 10:43 2/27/2002 (1)
  - Yup....he left a message. I still gotta call... - Alvin Caragay '72 02 11:18 2/27/2002 (0)
Defroster - Hooman 21:42 2/26/2002 (1)
- Re: Defroster - RogerJ 22:09 2/26/2002 (0)
FS: Evo Lower Airbox - zoomit 21:37 2/26/2002 (0)
1990 M3. A/C? R12 or R134A? - Erik Brannfors - Seattle M3 21:29 2/26/2002 (5)
- It's just that on the ETK it shows parts for both. - Erik Brannfors - Seattle M3 10:27 2/27/2002 (1)
  - Re: It's just that on the ETK it shows parts for b - RogerJ 21:43 2/27/2002 (0)
- Re: You have R12 Erik - eric_m3 09:31 2/27/2002 (0)
- Re: 1990 M3. A/C? R12 or R134A? - RogerJ 22:24 2/26/2002 (1)
  - I believe it wasn't until 1993 that BMW started - TUD 01:39 2/27/2002 (0)
the wheel exchange? - MichaelH 21:08 2/26/2002 (1)
- Re: the wheel exchange? - ryan 21:22 2/26/2002 (0)
Redline Racing coil-over conversions... - C///MR 20:56 2/26/2002 (0)
E3O VIDEOS!!! (url) - ROB89M3 20:51 2/26/2002 (0)
E3O VIDEOS!!! (url) - ROB89M3 20:49 2/26/2002 (0)
E30 to E36 325i transplant - Troy Wells 20:45 2/26/2002 (1)
- Re: Oh no here we go again.... - eric_m3 19:37 3/01/2002 (0)
H&R Spacers-do they screw into the hub/disc?>> - Bill 15:37 2/26/2002 (7)
- Re: H&R Spacers-do they screw into the hub/dis (url) (pic) - Randy Walters 08:21 2/27/2002 (0)
- some do... - Jon 17:11 2/26/2002 (2)
  - I think those are the ones I have, I will>>> - Bill 17:15 2/26/2002 (1)
    - Try calling Turner... - Wofford 17:21 2/26/2002 (0)
- And furthermore, H&R are 'hubcentric' spacers... - Paul Daniel 16:55 2/26/2002 (0)
- nope, sandwitched between wheel and hub.. - adam 16:16 2/26/2002 (1)
  - OK, then is it just that mine are stuck on there?> - Bill 17:05 2/26/2002 (0)
For tensioner swap, do you need deepwell 32mm?> - Bill 15:36 2/26/2002 (5)
- I used a Great Neck 1 1/4" deep socket (m) - John A 17:12 2/26/2002 (0)
- I used an adjustable wrench, worked fine. nt. - Jack S. 16:34 2/26/2002 (0)
- no >>>>(m) - Jeff E 15:58 2/26/2002 (2)
  - Re: Thanks to Jeff / Just pickup Sears 32mm it fit - AC 17:56 2/26/2002 (0)
  - thanks! 6.99 on craftsman website! nt - Bill 17:06 2/26/2002 (0)
EVENT IN BARCELONA(EUROPE)---BMWCLUBM.COM - DANIEL SOSPEDRA 15:35 2/26/2002 (0)
BG 44K valve cleaner - Anthony 88 ///M3 13:51 2/26/2002 (1)
- Run at high revs. Instant clean valves. (nt) - michael 16:36 2/26/2002 (0)
e36 M3 motor in an e30 M3? - Andrew Roane 13:37 2/26/2002 (32)
- Thanks for the insight on the e30 M3 - Andrew Roane 16:00 2/27/2002 (0)
- What is the approx. cost of such a swap? (NT) - Phil 00:05 2/27/2002 (0)
- six it... - Wofford 17:18 2/26/2002 (1)
  - Re: six it... - the real Wofford 17:43 2/26/2002 (0)
- Re: e36 M3 motor in an e30 M3? - Tim 16:08 2/26/2002 (1)
  - A 318 is much less $ then a 325 with the same tub. (nt) - michael 16:42 2/26/2002 (0)
- Re: Thinking about building a.... - eric_m3 15:02 2/26/2002 (25)
  - I vote for a Cummings diesel, Feel the torque! (nt) - michael 16:39 2/26/2002 (1)
    - That would be "Cummin's" diesel, Ahhh the torque!! - Ron ///Man 13:07 2/27/2002 (0)
  - More Questions? - Andrew Roane 16:27 2/26/2002 (22)
    - Re: $3500 for ron Checca 2.5 + core - eric_m3 19:54 2/26/2002 (0)
    - small block Chev has more torque and even cheaper - jimmy p 16:57 2/26/2002 (19)
      - hahhahhah - nicholas 22:16 2/26/2002 (0)
      - you're a arrogant purist. good points, but... - neophyte 20:53 2/26/2002 (16)
        
        I'm assuning you called me arrogant... - jimmy p 18:06 2/27/2002 (0)
        
        Re: I assume the worst and you called me arrogant. - eric_m3 10:44 2/27/2002 (8)
        
        He's right though.. - Doug 14:37 2/27/2002 (5)
        
        Re: The car was designed w/ a narrow purpose.... - eric_m3 19:22 2/27/2002 (4)
        
        Re: The car was designed w/ a narrow purpose.... - Gary H 12:14 2/28/2002 (3)
        
        Re: My view on "the" car not "my" car.... - eric_m3 09:20 3/01/2002 (2)
        
        Why the SIG board? I say post 'em here! - Doug 10:01 3/01/2002 (1)
        
        Re: Bring it dude, Actually lets put this to bed. - eric_m3 19:48 3/01/2002 (0)
        
        perhaps. but that is just your opinion.... - M3 Repete 12:10 2/27/2002 (1)
        
        Re: Yes it is a great road car! I agree - eric_m3 09:31 2/28/2002 (0)
        
        And you're a "neophyte" with poor grammar skills - B. Wheaton 03:14 2/27/2002 (5)
        
        and you're an expert on grammar? - M3 Repete 12:12 2/27/2002 (4)
        
        More WOB...I think it`s pretty obvious who`s the.. - John A 14:51 2/27/2002 (3)
        
        bad grammar doesn't diminish his point.... - M3 Repete 15:44 2/27/2002 (2)
        
        You capitalized "NOT". How about starting your.... - John A 01:47 2/28/2002 (1)
        
        capitalization does not change the premise..... (nt) - M3 Repete 09:47 2/28/2002 (0)
      - Cummings will make 700 - 800 ft/lbs torque... - michael 17:00 2/26/2002 (0)
    - As a BMWcca racecar? think about the ... - michael 16:56 2/26/2002 (0)
FYI: F1 is ON! - Erik Brannfors - Seattle M3 13:16 2/26/2002 (0)
wanted: door mounted tweeters w/black molding - Josh 12:43 2/26/2002 (2)
- trim with MB Quarts FS - the real Wofford 17:46 2/26/2002 (1)
  - Wonder if these will fit my A4? - WOTjunkie 11:24 2/27/2002 (0)
Looking for s14 crank and rods - ///M Chris 12:42 2/26/2002 (1)
- Call Rennie at Redline 954-783-7003 - michael 16:58 2/26/2002 (0)
wanted nice M3 white or black - Bob85 635 12:25 2/26/2002 (0)
thanks race tec/ Brembo for the bad ass brakes - ADAMK 12:11 2/26/2002 (2)
- What is your wheel/tire combo? - Paul Daniel 17:14 2/26/2002 (0)
- He he - Denis 15:36 2/26/2002 (0)
has anyone here ever dynoed rear wheel HP-how much (nt) - jimh 12:03 2/26/2002 (3)
- Did it a month ago. 215rwhp, on a 2.5l - Mike 20:58 2/26/2002 (0)
- bmwcca LA dyno day last year --- 187rwhp - m3pedro 17:58 2/26/2002 (1)
  - how many miles and what mods - jim 08:20 2/27/2002 (0)
Momo steering wheel FS (url) - Carlos 11:00 2/26/2002 (1)
- MOMO - FYI - jay1 16:09 2/26/2002 (0)
Parting e30 M3 Complete + 2 Interiors - Mario L. 08:19 2/26/2002 (0)
Swedish AutoX video... (url) - Johan 06:36 2/26/2002 (0)
Russell - Sunseeker rally results - DarranP 06:24 2/26/2002 (2)
- Re: Russell - Sunseeker rally results - RUSSELL 14:17 2/27/2002 (1)
  - Re: Russell - Sunseeker rally results - DarranP 16:07 2/27/2002 (0)
Anyone out there who can pull a CARFAX for me? - AA 00:44 2/26/2002 (0)
Anybody running Kumho ECSTA's? - Bill 00:01 2/26/2002 (4)
- Re: Anybody running Kumho ECSTA's? - Bob 09:37 3/04/2002 (0)
- 1 nail = 4 tires?! you must be on the cords 8^) - C///MR 01:22 2/26/2002 (0)
- I run them and I like it besides the soft sidewall - blu74tii 00:22 2/26/2002 (1)
  - For street, race, auto-x or track days? (nt) - michael 08:11 2/26/2002 (0)
Attention MIke NO M3 E-mail me it's about oil pan (nt) - roger j 22:09 2/25/2002 (1)
- Re: Attention MIke NO M3 E-mail me it's about oil - MIKE NO E30 M3 10:50 2/26/2002 (0)
Attention MIke NO M3 E-mail me it's about oil pan (nt) - roger j 22:09 2/25/2002 (0)
BKLYN NY 89 M3 IN NEED OF YOUR ASSISTANCE - jager 21:28 2/25/2002 (3)
- Re: BKLYN NY 89 M3 IN NEED OF YOUR ASSISTANCE - ryan 15:45 2/26/2002 (0)
- sounds like a mis diagnoses or scam to me - Wofford 10:54 2/26/2002 (0)
- Have him demonstrate the ECUs starting the car..(m - Doug 10:38 2/26/2002 (0)
BKLYN NY 89 M3 IN NEED OF YOUR ASSISTANCE - jager 21:27 2/25/2002 (0)
89 e30 m3 - jager 21:22 2/25/2002 (0)
E30 M3 DTM VIDEOS!! RARE! (url) - ROB89M3 20:20 2/25/2002 (21)
- Does anyone have any rally videos?? eom - Bry 22:28 2/25/2002 (11)
  - Re: Does anyone have any rally videos?? eom - Barry Robinson 23:41 2/26/2002 (0)
  - saw your car at the shop... - Wofford 09:34 2/26/2002 (5)
    - Long story, here is a link (url) - Bry 19:07 2/26/2002 (1)
      - Dang, accidently posted - Bry 19:09 2/26/2002 (0)
    - Long story, here is a link (url) - Bry 19:07 2/26/2002 (0)
    - It wont start... - Jeff J. 12:40 2/26/2002 (0)
    - Check out bimmerforums E30M3 board for the scoop. - WOTjunkie 11:31 2/26/2002 (0)
  - Re: Does anyone have any rally videos?? eom - ROB89M3 23:31 2/25/2002 (0)
  - Re: Does anyone have any rally videos?? eom - nicholas 22:34 2/25/2002 (2)
    - Re: Does anyone have any rally videos?? eom - B. Wheaton 22:50 2/25/2002 (1)
      - Fat pipe? WTH! I thought this was religous site? (nt) - Magnus 15:33 2/26/2002 (0)
- Do you know where to buy DVD/VHS E30 M3 DTM vids? - B. Wheaton 21:42 2/25/2002 (5)
  - Re: Do you know where to buy DVD/VHS E30 M3 DTM vi (url) - ROB89M3 23:33 2/25/2002 (0)
  - B.Wheaton....maybe you have tried here, but.... (url) - SALD 22:06 2/25/2002 (3)
    - just found they offer NTSC format as well YAY! - B. Wheaton 23:20 2/25/2002 (0)
    - I can have it converted for about $5 :^) THANKS! - B. Wheaton 23:14 2/25/2002 (1)
      - Hey, will they convert it for you? - SALD 23:25 2/25/2002 (0)
- any chance of getting the continuous version? - B. Wheaton 21:41 2/25/2002 (2)
  - Brandon here is a neat trick (url) - nicholas 22:15 2/25/2002 (1)
    - forgot to mention - nicholas 22:16 2/25/2002 (0)
DC Ice evo3 Ice rear spoiler for 190 UK pounds... (url) - michael 19:00 2/25/2002 (6)
- That picture is from another website. Be carefull (url) - Lee 21:42 2/25/2002 (1)
  - Re: That picture is from another website. Be caref (url) - Kristjan Aiaste 05:49 2/26/2002 (0)
- (that's about $270 US) (nt) - michael 19:05 2/25/2002 (3)
  - Re: (that's about $270 US) - sorry, miscalculated? (url) - Kristjan Aiaste 08:37 2/26/2002 (0)
  - EVO III wing - ///MBaller 21:28 2/25/2002 (1)
    - I make computer networks, and race a '72 '02... (pic) - michael 08:18 2/26/2002 (0)
FINAL CALL for the CENTRAL FL BMW MEET! - Kaiser 86 6er 18:38 2/25/2002 (0)
Battery Cable Install - Jeff 18:10 2/25/2002 (1)
- Re: Battery Cable Install - RogerJ 21:24 2/25/2002 (0)
Dealer price gouging? - Ed 18:04 2/25/2002 (1)
- Call Tom Duffy at Tom Hessor BMW in Scranton PA>>> - EricH 18:16 2/25/2002 (0)
Just bought an optima battery from Costco!!!! - Nick-NY 17:58 2/25/2002 (5)
- Re: I have had two of those batteries - eric_m3 21:15 2/25/2002 (4)
  - GET THe YELLOW DEEP CYCLE!!!!!!! - Mel 22:37 2/25/2002 (3)
    - Had a yellow one, not to impressed with 'em (nt) - Randy '90M3/'85 euro M5 16:36 2/26/2002 (2)
      - what s there not to be IMPRESSED??? - Mel 22:00 2/26/2002 (1)
        
        Once that shit dies,,it's over believe me !!! - Randy '90M3/'85 euro M5 07:22 3/03/2002 (0)
are e46 and e30 m3 acschnitzer pedals the same?? (nt) - or different??? YJ 16:24 2/25/2002 (0)
Engine Number - Peter Rumboll 14:39 2/25/2002 (4)
- Re: Engine Number - Angus 21:39 2/25/2002 (0)
- Re: Engine Number - dave clark 14:51 2/25/2002 (2)
  - Between the intake horns and int plnm (nt) - HANDBLT 18:04 2/25/2002 (0)
  - Between the throttle horns and int plenum (nt) - HANDBLT 18:03 2/25/2002 (0)
Need link for tensioner upgrade>>>> - Bill 13:46 2/25/2002 (18)
- Here are the instructions... - Jeff E 14:00 2/25/2002 (17)
  - correction.... - C///MR 01:37 2/26/2002 (0)
  - C///MR's instructions, that is, with someone - Jeff E 14:01 2/25/2002 (15)
    - Thanks -- this looks like a nice DIY job - Bill 14:16 2/25/2002 (14)
      - Watch out when removing the old tensioner.... - Jeff E 14:23 2/25/2002 (13)
        
        OK, does anyone else have the A/C hose....... - SALD 22:11 2/25/2002 (1)
        
        Yeah, they are right in the way....that's why - Jeff E 09:30 2/26/2002 (0)
        
        so it is easier to do from underneath???? - Bill 14:27 2/25/2002 (10)
        
        No, I don't think so...most do it from above (m) - Jeff E 14:37 2/25/2002 (9)
        
        P.S. I don't have a front splashguard, which is - Jeff E 15:10 2/25/2002 (8)
        
        it aint a splashguard, it an areo panel! (nt) - michael 15:58 2/25/2002 (7)
        
        Oh, you're talking about the splitter.....I was - Jeff E 16:20 2/25/2002 (0)
        
        a what? Whatever the thing is called, the panel - Jeff E 16:00 2/25/2002 (5)
        
        Gee, doesn't water get splashed up then? ;^)(more) - michael 18:48 2/25/2002 (4)
        
        so there is some sort of a stock panel there or no - Jeff E 09:10 2/26/2002 (3)
        
        Yes, they DO have splashguards from factory...(m) - Doug 10:12 2/26/2002 (2)
        
        OK, thanks...not sure if this would inhibit - Jeff E 10:25 2/26/2002 (1)
        
        I had to remove mine to do the tensioner job. (nt) - Doug 10:40 2/26/2002 (0)
Uk emission levels - Darren M 13:16 2/25/2002 (5)
- Sounds Right. - Dibs 17:49 2/28/2002 (0)
- Re: Uk emission levels - Paul D 17:01 2/25/2002 (2)
  - last years data & meeting - DArren M 18:40 2/25/2002 (0)
  - meeting - David 87M3 17:49 2/25/2002 (0)
- Re: Uk emission levels - David 87M3 16:09 2/25/2002 (0)
S50 / S52 and EURO engine Transplant Q's. - rIChie 12:44 2/25/2002 (8)
- Re: S50 / S52 and EURO engine Transplant Q's. - dave clark 02:09 2/26/2002 (1)
  - Re: S50 / S52 and EURO engine Transplant Q's. (url) - Phil 16:33 2/27/2002 (0)
- The CONs are that you will spend $$$$$$ for an.... - michael 16:05 2/25/2002 (0)
- You have it backwards! Buy the M3 in Germany! - B. Wheaton 15:47 2/25/2002 (1)
  - Or find an EVO3 motor and slip it into... - michael 19:08 2/25/2002 (0)
- Yes, BUT keep the S14 to rebuild in the meantime.. - Doug 15:43 2/25/2002 (0)
- Re: S50 / S52 and EURO engine Transplant Q's. - Robert Puertas 14:03 2/25/2002 (1)
  - Re: S50 / S52 and EURO engine Transplant Q's. - rIChie 15:11 2/25/2002 (0)
stuff for sale - john///m3 12:40 2/25/2002 (0)
Drivers school openings still available! (url) - eric_m3 12:32 2/25/2002 (0)
ACS Aluminum pedals for sale (pic) - pumarizzo 10:51 2/25/2002 (1)
- you've got mail (nt) - EricH 11:00 2/25/2002 (0)
E30 M3 front bumper/spoiler - fabian 10:32 2/25/2002 (2)
- I have a used but freshly repainted one..... - Erik Brannfors - Seattle M3 10:41 2/25/2002 (1)
  - Re: I have a used but freshly repainted one..... - fabian 09:21 2/27/2002 (0)
Any e30 M3's available in North Carolina? - Andrew Roane 10:30 2/25/2002 (0)
Stocks Wheels - Phil 01:08 2/25/2002 (2)
- Re: UP to $500 w/ out tires if you advertise - eric_m3 11:43 2/25/2002 (0)
- Re: Stocks Wheels - fabian 10:36 2/25/2002 (0)

Questions, comments, or problems, please visit the Roadfly help desk.