bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 10

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 10
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

FS: 1988 M3 (url) - Sean 23:33 3/17/2002 (1)
- Re: FS: 1988 M3 - I. Palmer 09:53 3/18/2002 (0)
Possible to convert to E36 M3 brakes? - Dave 22:47 3/17/2002 (2)
- Yes, I had them on my e30M3 - more/.... - MG 21:43 3/18/2002 (0)
- Possible? Yes. Easy? Hell no.... - JamesM 11:53 3/18/2002 (0)
Some Ebay items.... (url) - Jack Money (USA) 22:36 3/17/2002 (0)
WTB: helmet for ax & driving schools (nt) - shark328 22:34 3/17/2002 (2)
- A brain that thinks a $75 helmet is good enough... - michael 09:15 3/18/2002 (0)
- Why would you want to buy a used helmet? - TUD 23:25 3/17/2002 (0)
I want to buy an M3 engine in Australia. - Bryn 22:33 3/17/2002 (2)
- difficult to find - only 15-20 E30 M3's here, all - booboo 15:45 3/19/2002 (0)
- Re: I want to buy an M3 engine in Australia. - Charley 22:48 3/17/2002 (0)
E30 M3 WING ON EBAY!!! WILL IT FIT 325I? (nt) - evom3 21:58 3/17/2002 (4)
- Re: E30 M3 WING ON EBAY!!! WILL IT FIT 325I? - Matt G 22:09 3/18/2002 (0)
- Re: E30 M3 WING ON EBAY!!! WILL IT FIT 325I? - Damian 13:15 3/18/2002 (0)
- No (nt) - michael 09:16 3/18/2002 (0)
- Re: E30 M3 WING ON EBAY!!! WILL IT FIT 325I? - Barry Robinson 01:18 3/18/2002 (0)
WTD cruise Control mechanism for M3 1988?? - Jose Perez 20:23 3/17/2002 (0)
E30 project cars wanted..email me..want em cheap - Ryan 20:08 3/17/2002 (0)
Tune to the the SPEED channel for yesterday's F1GP (url) (nt) - JFS 20:00 3/17/2002 (1)
- Re: Tune to the the SPEED channel for yesterday's - MG 20:26 3/17/2002 (0)
are m3's really expensive to maintain - mteckboy 19:14 3/17/2002 (20)
- Response to the below... - michael 09:40 3/18/2002 (8)
  - Re: Response to the below... - Gary H 11:59 3/18/2002 (3)
    - Re: Response to the below... - Gary H 03:53 3/19/2002 (0)
    - "Piece of mind" (m) - John A 20:38 3/18/2002 (0)
    - Re: Response to the below... - John A 20:22 3/18/2002 (0)
  - Re: Response to the above... - MarkPike 10:22 3/18/2002 (1)
    - I'm not upset... - michael 13:52 3/18/2002 (0)
  - Re: Welding - MarkPike 10:03 3/18/2002 (1)
    - Aint that a b#tch when they do not ... - michael 13:58 3/18/2002 (0)
- Re: are m3's really expensive to maintain (url) - Gary H 02:50 3/18/2002 (0)
- Long testimonial.................. - John A 01:48 3/18/2002 (2)
  - Re: Long testimonial.................. - dxp 12:44 3/18/2002 (1)
    - I`ll be happier when I get the in tank fuel pump.. - John A 20:29 3/18/2002 (0)
- Re: m3's are really expensive to maintain (url) (pic) - MarkPike 00:48 3/18/2002 (0)
- I spend WAY less then I would on car payments. (nt) - michael 21:09 3/17/2002 (0)
- E30 M3's are. E36 M3 is less. - TUD 20:38 3/17/2002 (0)
- Makes you want to be your own mechanic :^) - B. Wheaton 20:12 3/17/2002 (0)
- Man you won't believe how much!!!!! - Joan 19:41 3/17/2002 (0)
- Absolutely - M3 = 3 x more expensive!! - MG 19:40 3/17/2002 (1)
  - Like Matt says bring your own vaseline... 8^P (nt) - KevinS 13:27 3/18/2002 (0)
Ran my 1st Autocross today and........... - HANDBLT 18:59 3/17/2002 (2)
- Re: Ran my 1st Autocross today and........... (url) - Randy Walters 21:22 3/18/2002 (0)
- E30 M3s run in CSP or B stock - Phil-OR 10:57 3/18/2002 (0)
engine hesitation - RaceCarRobbie 18:28 3/17/2002 (1)
- Sounds electronic, check... - michael 21:11 3/17/2002 (0)
Best H/P gains for e30 M3? Help!!!!! - mteckboy 18:00 3/17/2002 (9)
- Great results with some modernizing and... - Stan 14:52 3/18/2002 (0)
- Re: Well that is interesting, you could..... - eric_m3 13:47 3/18/2002 (0)
- Re: Best H/P gains for e30 M3? Help!!!!! - Gary H 12:06 3/18/2002 (0)
- Re: Best H/P gains for e30 M3? Help!!!!! - Roops 04:13 3/18/2002 (0)
- how much would the e36 motor conv cost? - mteckboy 18:18 3/17/2002 (2)
  - The value of the car, go 426 Hemi all the way! (nt) - michael 21:44 3/17/2002 (0)
  - Re: how much would the e36 motor conv cost? - je .uk 18:26 3/17/2002 (0)
- E36 M3...heh.heh... - m3lachsilber 18:14 3/17/2002 (0)
- Re: Best H/P gains for e30 M3? Help!!!!! - je .uk 18:11 3/17/2002 (0)
FS: Rear Seats - matt@gaugeman 17:54 3/17/2002 (0)
Engine shaking after motor turn off.....Help - Mark B. 17:38 3/17/2002 (2)
- Re: OOOOHHHH NNNOOOOOO! - eric_m3 13:48 3/18/2002 (1)
  - Shaking...HELP - Mark B. 20:21 3/18/2002 (0)
Reallly need front bumper cover and drivers fender - Matt 16:19 3/17/2002 (0)
New Products Available for the 325/325e (url) (pic) - Dan Pinder 14:39 3/17/2002 (2)
- Idea--support the site by becoming a sponsor... - Alan 18:14 3/17/2002 (0)
- If you're really sorry for the spam...don't do it. (nt) - Jim 16:59 3/17/2002 (0)
Heres that URL. For those seatbelts - Red Bimmer 10:28 3/17/2002 (4)
- BMW does offer a red seat belt. We offer them for - John@Bekkers 08:32 3/19/2002 (0)
- Thoes do not sound like BMW belts (more) - michael 21:42 3/17/2002 (2)
  - Re: Thoes do not sound like BMW belts (more) - Red Bimmer 22:35 3/17/2002 (1)
    - The point is I do NOT know... - michael 15:26 3/20/2002 (0)
Elictrical Schematic - MaximuM3 10:07 3/17/2002 (1)
- Re: Elictrical Schematic - AC 23:36 3/22/2002 (0)
Is your BMW the best (url) - Jim South 09:51 3/17/2002 (0)
HELP!! Need a # - I. Palmer 08:45 3/17/2002 (3)
- Eurasian 800-824-8814 ask for dave (nt) - Randy '90M3/'85 euro M5 19:37 3/17/2002 (0)
- (800)824-8814 - John A 16:17 3/17/2002 (1)
  - Re: (800)824-8814 - I. Palmer 23:10 3/17/2002 (0)
Totally blown away by an E36 EVO yesterday :( (pic) - Derin 05:18 3/17/2002 (14)
- Re: Totally blown WHERE IN SCOTLAND R U ? - Allan Barbour 12:24 3/22/2002 (0)
- Re: Totally blown away by an E36 EVO yesterday :( - jamie 17:43 3/18/2002 (1)
  - Point taken Jamie....I've since revisited.... - Derin 07:41 3/21/2002 (0)
- Knowing the road helps alot... - michael 21:37 3/17/2002 (4)
  - Putney!!! I used to live in Chesterfield NH right - Jeff E 08:45 3/18/2002 (0)
  - LOL...I kept my pants clean at the expensive of... - Derin 03:33 3/18/2002 (2)
    - yep, knowing the road... - Terry 04:09 3/18/2002 (1)
      - Yes...I was thinking that about the dark too.... - Derin 06:59 3/18/2002 (0)
- I have had a similar incounter (M) - adam 14:13 3/17/2002 (0)
- he could have been a more epxpericened driver - Mel 10:09 3/17/2002 (3)
  - Definitely Mel!..........(more) - Derin 10:27 3/17/2002 (2)
    - Re: Definitely Mel!..........(more) - Darren M 12:22 3/17/2002 (1)
      - Yep...those are my excuses too Darren....lol...but - Derin 13:20 3/17/2002 (0)
- Sorry ..wrong link...trying again (url) - Derin 05:22 3/17/2002 (0)
M3 Specialists UK - kevin 03:20 3/17/2002 (2)
- Re: M3 Specialists UK - Mikey B 00:51 3/22/2002 (0)
- Re: M3 Specialists UK (url) - Jon 10:46 3/21/2002 (0)
WTB cover for fuel relays under hood.. (pic) - adam 03:02 3/17/2002 (4)
- buy it new they are only like 14.00 from Eurasian! (pic) - Jon K 08:18 3/17/2002 (3)
  - according to my dealer, - adam 14:15 3/17/2002 (2)
    - Try Eurasian, a few weeks ago it was avail! - Jon K 16:46 3/17/2002 (1)
      - I will do that, thanks jon k - adam 18:15 3/17/2002 (0)
Help!!! WTB OEM bumper/ fender - I. Palmer 01:41 3/17/2002 (1)
- Call Eurasian, about 950.00 for both new! - Jon K 08:19 3/17/2002 (0)
Help.. how to reinstall sides of front bumper???? - Jose Perez 23:34 3/16/2002 (2)
- You`ve probably bent the metal tabs............... - John A 01:24 3/17/2002 (1)
  - Re: You`ve probably bent the metal tabs........... - Jose Perez 15:58 3/17/2002 (0)
Red Motorsport Seatbelts - Red Bimmer 23:21 3/16/2002 (0)
New Mod: Rogue Short Shifter (url) - Dave 23:01 3/16/2002 (0)
Flywheel bolts ? - Nolan 22:35 3/16/2002 (3)
- FYI you need shorter bolts for Evo ltw flywheel - B. Wheaton 20:14 3/17/2002 (0)
- Re: Flywheel bolts ? - Mike E30M3 Cabrio Project 14:49 3/17/2002 (0)
- Just replaced mine.... - Randy '90M3/'85 euro M5 07:14 3/17/2002 (0)
Anybody know paint code of MACAU BLUE ? (nt) - smithers 20:14 3/16/2002 (1)
- Is the #250 the MACAU BLUE paint code UR lookin'4? (nt) - LaVern (OO=[][]=OO) 20:29 3/18/2002 (0)
Goodwood Sports & Supercar day 30th Sept 2002 (url) - Geoff Lowe 14:36 3/16/2002 (0)
Racing aluminum rad (pic) - Lee 14:28 3/16/2002 (0)
Leaking Convertible - Fred 08:55 3/16/2002 (0)
Anybody installed a Crane coil? - SPM3 08:10 3/16/2002 (0)
Looking for the EVO 3 Adjustable Rear Spoiler - John 07:22 3/16/2002 (4)
- Re: Looking for the EVO 3 Adjustable Rear Spoiler (url) - Gsan 15:18 3/18/2002 (0)
- Re: Looking for the EVO 3 Adjustable Rear Spoiler - Thomas 01:51 3/17/2002 (1)
  - ss headers? for your e36? - adam 03:00 3/17/2002 (0)
- Try Maxmillian's 800-950-2002 or Turner Mtrsprt - Bill 12:45 3/16/2002 (0)
Removed Dash Cluster--Can I still drive it? - Amber 06:47 3/16/2002 (1)
- Yes, just be careful!!! - Ron ///Man 11:29 3/16/2002 (0)
Odometer gears--Anyone have a source? - Peter 23:25 3/15/2002 (4)
- Re: They cannot sell them to you by law... - eric_m3 13:53 3/18/2002 (0)
- Re: Odometer gears--Anyone have a source? - MarkPike 16:57 3/16/2002 (0)
- Try these guys ... - Jeff87is 13:49 3/16/2002 (0)
- I need some also.. - adam 00:52 3/16/2002 (0)
Rotting/cracked wiring - Rich 21:38 3/15/2002 (1)
- try heat shrink tubing - Jon K 08:24 3/17/2002 (0)
Redline Water Wetter--Any Good or Snake Oil? - Tracy 20:31 3/15/2002 (5)
- at least it's not "AS SEEN ON TV" :^) (more) (url) (pic) - B. Wheaton 14:51 3/16/2002 (0)
- Re: Redline Water Wetter--Any Good or Snake Oil? - WH 21:37 3/15/2002 (0)
- Re: Redline Water Wetter--Any Good or Snake Oil? - dhs 20:37 3/15/2002 (2)
  - how does it mix with... - C///MR 01:59 3/16/2002 (1)
    - There is info on the redline site - dhs 11:43 3/16/2002 (0)
suspension help(ground Control?) HELP!!!!!!! - mteckboy 20:21 3/15/2002 (0)
need front spoiler and drivers side Fender - Matt 19:37 3/15/2002 (2)
- Re: eddress? (nt) - eric_m3 20:27 3/15/2002 (1)
  - Right click on the name, then click "properties".. - John A 01:29 3/17/2002 (0)
88-90 M3's - Noel 16:42 3/15/2002 (4)
- Re: 88-90 M3's - JPL 09:52 3/18/2002 (0)
- Re: 88-90 M3's - Randy Walters 19:32 3/15/2002 (1)
  - Seems like BMW went backwards... - Drew 00:14 3/17/2002 (0)
- 90s have airbags and heated seats (option) other> - Bill 17:40 3/15/2002 (0)
Volvo Dizzy Cap - Kurt 16:40 3/15/2002 (5)
- Yes...as long as.... - Jon 20:51 3/15/2002 (4)
  - The later rotor has a hole, not a spring. (m) - John A 23:20 3/15/2002 (3)
    - Oh, that's not what I heard... - Jon 00:59 3/16/2002 (2)
      - No spring at all on the later cap (m) - John A 12:59 3/16/2002 (1)
        
        The most important thing is that you don`t mix.... - John A 13:06 3/16/2002 (0)
Philly meet Update: Sunday 3/24 11:00am KofP - MZoom 14:50 3/15/2002 (0)
98 M3/4a FS - Stevus 14:01 3/15/2002 (0)
///M3 Running "rich" or "lean" - ///MinWei 13:42 3/15/2002 (3)
- Re: well that is a good question..... - eric_m3 18:04 3/15/2002 (2)
  - Thanks Eric - ///MinWei 15:42 3/18/2002 (1)
    - Re: Cat can be bad actually because - eric_m3 19:15 3/18/2002 (0)
Car broken into last night. Parts question - Steve Carbone 13:21 3/15/2002 (1)
- Re: Car broken into last night. Parts question - Barry Robinson 15:21 3/15/2002 (0)
Centre resonator - looks like a cat. - Mikey B 13:04 3/15/2002 (1)
- check this out (url) - C///MR 01:51 3/16/2002 (0)
Help!!!! WTB a front bumper - I. Palmer 12:25 3/15/2002 (0)
Anyone w/18inch wheels.Help!!!! - mteckboy 07:17 3/15/2002 (2)
- Re: Anyone w/18inch wheels.Help!!!! (url) (pic) - adam 12:31 3/15/2002 (0)
- Re: Anyone w/18inch wheels.Help!!!! - KevinS 08:12 3/15/2002 (0)
2.6L vs 2.3LSC M3 (Dick vs Gary's M3) - Gary H 05:52 3/15/2002 (5)
- Possible to have a streetable 2.6 or just 2.5?? - Doug 15:43 3/15/2002 (0)
- Re: 2.6L vs 2.3LSC M3 (Dick vs Gary's M3) - Gary H 07:19 3/15/2002 (3)
  - Re: 2.6L vs 2.3LSC M3 (Dick vs Gary's M3) - Barry Robinson 15:36 3/15/2002 (1)
    - Re: 2.6L vs 2.3LSC M3 (Dick vs Gary's M3) - GaryH 01:51 3/16/2002 (0)
  - Post the graph? nt (nt) - Stan 11:11 3/15/2002 (0)
Hahn im Ohr. - The Interlocker 04:23 3/15/2002 (3)
- Schnecke in der Nase !! - Mike 05:02 3/15/2002 (2)
  - Sprechen Sie Englisch? - :-) (nt) - Drew 00:15 3/17/2002 (1)
    - Re: Sprechen Sie Englisch? - :-) - Mike 07:34 3/18/2002 (0)
FAO UK / European M3 owners!! (url) - Geoff 03:04 3/15/2002 (10)
- Re: FAO UK / European M3 owners!! - Roops 06:37 3/15/2002 (4)
  - Castle Combe - Darren M 07:32 3/15/2002 (2)
    - Re: Castle Combe - Roops 09:32 3/15/2002 (0)
    - no its not a weekday!!!! (EOM) - Darren M 07:35 3/15/2002 (0)
  - Re: FAO UK / European M3 owners!! - Darren M 06:57 3/15/2002 (0)
- Re: FAO UK / European M3 owners!! - DarranP 03:53 3/15/2002 (4)
  - Re: FAO UK / European M3 owners!! - Geoff 06:07 3/15/2002 (3)
    - Re: FAO UK / European M3 owners!! - DarranP 09:10 3/15/2002 (2)
      - Re: FAO UK / European M3 owners!! - Geoff 14:14 3/16/2002 (1)
        
        Re: FAO UK / European M3 owners!! - Roops 04:27 3/18/2002 (0)
Replacing rotors - Justin 01:34 3/15/2002 (2)
- Re: a couple more things for this job are... - eric_m3 09:50 3/15/2002 (0)
- Re: Replacing rotors - C///MR 02:15 3/15/2002 (0)
pic test (url) (pic) - Derek 00:47 3/15/2002 (0)
Stahlwille tools - cgoodwin 00:08 3/15/2002 (1)
- Tranny Special Tool Is There - george 11:14 3/15/2002 (0)
Anyone Selling an E30 M3 in Boston Area...... - DCB95M3 00:06 3/15/2002 (0)
anyone have aluminum heat & soot shield on bumper - john///m3 22:26 3/14/2002 (3)
- Folia Tec makes them nt - ritter 12:25 3/15/2002 (1)
  - Do you have a link? Couldn't find it. - Phil-OR 13:47 3/15/2002 (0)
- pic of heat and soot shield on bumper over muffler (pic) (nt) - john///m3 22:30 3/14/2002 (0)
need help poor ruuning - Grizzly 22:22 3/14/2002 (2)
- sounds like a cracked cap/rotor - BuzznM3 11:16 3/15/2002 (0)
- check.... - C///MR 01:26 3/15/2002 (0)
who has done hid xenon headlights or angel eyes - john///m3 22:20 3/14/2002 (3)
- I believe I was the first to have 9006 kit. No? (pic) - Thanks! Magnus! 23:59 3/14/2002 (0)
- Re: who has done hid xenon headlights or angel eye (pic) - Chris F. 23:33 3/14/2002 (0)
- Angel eyes for E-30 M3 - Jose Perez 23:17 3/14/2002 (0)
Check engine light and a fuel sys prob.... - Jacko 22:15 3/14/2002 (2)
- join the SIG - BuzznM3 11:23 3/15/2002 (0)
- Re: Check engine light and a fuel sys prob.... - bruce 23:53 3/14/2002 (0)
thank you erik branffors. my euro ellipsoids with - john///m3 21:33 3/14/2002 (0)
Congratulations Mark Pike !!!!!!!!!! (pic) - D///M3 21:21 3/14/2002 (4)
- Re: Congratulations Mark Pike !!!!!!!!!! - Paul 01:36 3/15/2002 (0)
- How are babies made? Need P/N. Congrats...... - Thanks! Magnus! 21:58 3/14/2002 (2)
  - Hopefully not on an assembly line. (nt) - Jon 20:54 3/15/2002 (1)
    - Contact your local dealer for PN. (nt) - Jon 20:54 3/15/2002 (0)
E-36 M3 seats is there a special way for installin (nt) - MKM3 19:57 3/14/2002 (0)
Drivers side Fender needed - Matt 19:42 3/14/2002 (0)
E-34 15"BBS rims fits on E-30 M3????? - Jose Perez 19:09 3/14/2002 (0)
E-34 15"BBS rims fits on E-30 M3????? - Jose Perez 19:09 3/14/2002 (0)
test posting... (pic) - michael 17:47 3/14/2002 (3)
- Do you see the car? - michael 17:49 3/14/2002 (2)
  - I see it.. - adam 17:53 3/14/2002 (1)
    - cool...this is from RoadFly's "user web space" (nt) - michael 18:01 3/14/2002 (0)
Vintage motorsport/s web site???? - -George 17:19 3/14/2002 (1)
- Found it/www.vintagesportsracing.com - -George 18:07 3/14/2002 (0)
WTB: HRE 15 inch wheels - cosmosm3 16:13 3/14/2002 (1)
- call daniel @ by design 888-993-2911 - ADAMK 16:57 3/14/2002 (0)
ORIGINAL "ANGEL EYES" sets at eBay in England (url) (pic) - Levio 15:57 3/14/2002 (0)
Trick to eliminate some lil squeaks... - Mark M 15:40 3/14/2002 (1)
- Try Vinylex--its even better. - Rusty 19:27 3/14/2002 (0)
10K mile Henna in Roundel!!! - Greg C. 15:36 3/14/2002 (2)
- There was one in dream car garage last year. - Thanks! Magnus! 19:44 3/14/2002 (0)
- He also wants $25,000 and Carfax reports - TUD 15:53 3/14/2002 (0)
Some openings available for 3/25-3/26@LRP - eric_m3 15:12 3/14/2002 (0)
rattle on shutdown - Phil-OR 14:20 3/14/2002 (6)
- mine too, but not when clutch is pressed in.. - adam 14:37 3/14/2002 (5)
  - "normal" tranny rattle. worse w/Redline MTL (nt) - michael 15:32 3/14/2002 (2)
    - Interesting. I did just add MTL and rebuilt - Phil-OR 19:09 3/14/2002 (0)
    - I second that - Gary 88 Lachssilber 18:18 3/14/2002 (0)
  - The the through out bearing rattling, You may need (nt) - a clutch soon scott 325i 15:20 3/14/2002 (1)
    - it been consistant for about 60k now. - adam 16:21 3/14/2002 (0)
FS: E30 M3 wheels $150 for set (pic) - TCD 13:49 3/14/2002 (2)
- You have mail - scott 325i 15:04 3/14/2002 (1)
  - You have more mail - scott 325i 15:09 3/14/2002 (0)
WTB: Set (4) Used, Bilstein Sport Shocks/Inserts - David L 13:02 3/14/2002 (0)
F/S 90 E30 M3 - Tim 12:58 3/14/2002 (0)
Check engine light ? - Scott 12:26 3/14/2002 (3)
- If it's the warning lights under the instruments(m - Doug 12:47 3/14/2002 (0)
- That is a check light, not a check engine light>> - EricH 12:34 3/14/2002 (1)
  - Re: That is a check light, not a check engine ligh - Scott 12:50 3/14/2002 (0)
saw this on the e30 board M3? (url) (nt) - Anthony 88 ///M3 12:08 3/14/2002 (2)
- Re: saw this on the e30 board M3? - Matt S 16:08 3/14/2002 (0)
- NOT an M3. End of story. - Bill 14:58 3/14/2002 (0)
Opinions wanted, Momo or Sparco steering wheel?>>> - EricH 12:06 3/14/2002 (4)
- Re: I have 330 mm Momo Model 78 suede! - eric_m3 19:23 3/14/2002 (0)
- I have a Momo Competition and love it - Phil-OR 19:11 3/14/2002 (1)
  - Momo Champion - Kasra Ajir 20:29 3/14/2002 (0)
- No love? C'mon.... (nt) - EricH 16:03 3/14/2002 (0)
I need P/n for Intake elbow Gasket. PLEASE! (nt) - Magnus! 11:54 3/14/2002 (3)
- Do you want the boot btwn the AFM and plenum? - Bill 15:00 3/14/2002 (1)
  - My mistake! I wanted the airhorn gaskets. Got'em> (nt) - Thanks! Magnus! 19:11 3/14/2002 (0)
- Please explain what an intake elbow gasket is - John A 12:05 3/14/2002 (0)
no shock tower studs on lft side 4 stress bar? - Josh ///88 11:30 3/14/2002 (5)
- are they stripped? Is the strut properly mounted? (nt) - Eugene Lou 12:36 3/14/2002 (2)
  - otherwise fine - Josh ///88 12:52 3/14/2002 (0)
  - They appear to have been cut : ( - Josh ///88 12:51 3/14/2002 (0)
- I hope they have nuts on them (nt) - John A 12:06 3/14/2002 (1)
  - those studs only have stubs - Josh ///88 12:43 3/14/2002 (0)
E30 M3 Racecar DMod/SCCA ITE (url) (pic) - Jason B 11:20 3/14/2002 (1)
- Why are you selling? (nt) - EricH 12:05 3/14/2002 (0)
Turners classified SHUT DOWN - TIM NG 10:57 3/14/2002 (4)
- Re: Turners classified SHUT DOWN - Doug @ turnermotorsport 09:26 3/19/2002 (0)
- Yesterday there were sever complaints........ - Erik Brannfors - Seattle M3 11:39 3/14/2002 (1)
  - ....several, not server..... (nt) - Erik Brannfors - Seattle M3 11:40 3/14/2002 (0)
- I meant "TMS Classified pages " - BuzznM3 10:59 3/14/2002 (0)
Replacement Windshield Cost? - WOTjunkie 10:56 3/14/2002 (5)
- specifics of the E30 M3 windshield.. - Doug 12:24 3/14/2002 (1)
  - Thanks. This car is rust free. - WOTjunkie 12:53 3/14/2002 (0)
- Re: Replacement Windshield Cost? - Tim 11:55 3/14/2002 (2)
  - Not the same as other E30`s (m) - John A 12:13 3/14/2002 (1)
    - Thanks! - WOTjunkie 12:54 3/14/2002 (0)
Any e30 M3 owners in the Netherlands/Europe? (nt) - SPM3 10:27 3/14/2002 (6)
- Re: Any e30 M3 owners in the Netherlands/Europe? - Gsan 15:31 3/18/2002 (0)
- Re: Any e30 M3 owners in the Netherlands/Europe? - simon mac 11:56 3/14/2002 (0)
- Re: Any e30 M3 owners in the Netherlands/Europe? - Roops 10:38 3/14/2002 (3)
  - Re: Any e30 M3 owners in the Netherlands/Europe? - SPM3 10:48 3/14/2002 (2)
    - Re: Any e30 M3 owners in the Netherlands/Europe? - Markus 11:35 3/14/2002 (0)
    - Re: Any e30 M3 owners in the Netherlands/Europe? - Roops 11:32 3/14/2002 (0)
Mcrazy (url) (nt) - Mperor 10:21 3/14/2002 (0)
Does the S50/S52 tensioner really work? - SPM3 10:14 3/14/2002 (1)
- May not solve your prob, but it works for me. (nt) - michael 11:51 3/14/2002 (0)
has ne1 replaced cv joints & found the axle lock - gmay 06:12 3/14/2002 (0)
Anyone have experience with piggy back ECUs? - Pat Chiang 04:03 3/14/2002 (2)
- I am working on installing a link system on my car - adam 04:10 3/14/2002 (1)
  - Awesome, can't wait! to see your results. (eom) - Pat Chiang 15:24 3/14/2002 (0)
poor running help! - Grizzly 00:12 3/14/2002 (2)
- Could be several things, but check the ..(m) - Doug 10:38 3/14/2002 (1)
  - clean coolant temp sensor also, caused minetoactup - adam 14:40 3/14/2002 (0)
anyone's htd wnshield wshr nozzles flame out? - Josh ///88 23:59 3/13/2002 (2)
- Re: anyone's htd wnshield wshr nozzles flame out? - DonRW2001 11:03 3/15/2002 (0)
- disconnected, suggest u do same in mod. climate - Josh ///88 11:27 3/14/2002 (0)
Wheel specs? - Dave 23:45 3/13/2002 (1)
- Re: Wheel specs? - Roops 05:45 3/14/2002 (0)
FS: AC Schnitzer steering wheel and TSW alloys - Alex 22:00 3/13/2002 (2)
- You got mail - carreraboy911 08:28 3/14/2002 (0)
- do you have pics of the acs wheel - john///m3 22:52 3/13/2002 (0)
MD/VA/DC enthusiasts - 5 Guys tonight @ 8 (url) - Victor Hall 17:55 3/13/2002 (4)
- I missed it! - lindej 16:17 3/14/2002 (1)
  - That'd be fun too! (nt) - Jeff E 16:28 3/14/2002 (0)
- Sorry Vic, I just saw this post this morning.... - Jeff E 09:18 3/14/2002 (1)
  - Sorry - I posted around 6pm - Victor Hall 12:44 3/14/2002 (0)
Timing Chain Survey Please...Who has & not, miles? - Mike Saber 17:41 3/13/2002 (17)
- 94k, orig. chain, E36 tensioner, is quiet now. (nt) - Jeff E 11:45 3/14/2002 (0)
- Re: 122K still quiet, on mint '88, purchased ..... - David Boen 11:41 3/14/2002 (0)
- 160k + with e36 tentioner @ 145k, very quiet now. (nt) - michael 08:29 3/14/2002 (1)
  - original rails, gears and chain, BTW. (nt) - michael 08:30 3/14/2002 (0)
- I am going to change it this friday, question for - adrianM/// 05:07 3/14/2002 (1)
  - Unfortunately for my wallet, the rails were....... - John A 05:24 3/14/2002 (0)
- Re: Timing Chain Survey Please...Who has & not - Angus 23:25 3/13/2002 (1)
  - Ouch, what did the kids do to the motor? - Bry 16:23 3/14/2002 (0)
- Done at 156K miles. It`s never been this quiet(m) - John A 22:29 3/13/2002 (3)
  - Re: Done at 156K miles. It`s never been this quiet - MichaelH 23:20 3/13/2002 (2)
    - Some of us old farts can get it done....... - John A 03:05 3/14/2002 (1)
      - Age & treachery beat youth & daring any day... - michael 08:28 3/14/2002 (0)
- done at 107,000 - scrv1 22:16 3/13/2002 (0)
- 3,000 miles, original chain, VERY quiet! (nt) - Jim 19:16 3/13/2002 (2)
  - Give it another 2000 miles Jim......... - Derin 18:51 3/14/2002 (1)
    - Yikes!!! (nt) - Jim 00:48 3/15/2002 (0)
- Re: 86,000 miles, original chain, still quiet - Mike Saber 17:42 3/13/2002 (0)
F/S motorsport flag decal (url) (pic) - Buzz 17:35 3/13/2002 (0)
Anyone interested in a Custom 2K CBR 600 F4>> - -Johnny 5....AvusBlau//M3 17:31 3/13/2002 (0)
Smoke from windshield washer nozzle??? - Josh ///88 17:30 3/13/2002 (1)
- Not from the pump....the M3 has heated nozzles(nt) - John A 17:37 3/13/2002 (0)
7-Series brake master cyl on E30 M3 - booboo 16:49 3/13/2002 (3)
- Just did it. Also goodridge lines and slotted.... - zak 08:41 3/14/2002 (0)
- Re: Nice up grade but you will need..... - eric_m3 08:34 3/14/2002 (0)
- try gustave's site - Bill 22:36 3/13/2002 (0)
Need part number for (more) - DarranP 15:21 3/13/2002 (0)
Roadfly vs. SIG! Chain Tensioner Question>>>> - Bill 14:04 3/13/2002 (16)
- Re: Roadfly vs. SIG! Chain Tensioner Question>& - Gary H 02:09 3/14/2002 (0)
- WTF???? Get it good and tight and use... - michael 17:28 3/13/2002 (5)
  - I torque everything! - Bry 16:26 3/14/2002 (1)
    - same here!! (nt) - Jeff E 16:30 3/14/2002 (0)
  - Uh, yeah I torque my valve cover nuts. - george 20:37 3/13/2002 (2)
    - Me too... - John A 22:30 3/13/2002 (1)
      - Sorry to hear it! :^} (nt) - michael 16:23 3/14/2002 (0)
- Re: Roadfly vs. SIG! Chain Tensioner Question>& - Brett Anderson 16:54 3/13/2002 (1)
  - Brett - your CD was NOT plagarized, all that was>> - Bill 22:34 3/13/2002 (0)
- What part of the Koala CD tells about installing.. - John A 15:35 3/13/2002 (1)
  - when I say per the Koala CD, I am qouting from>>> - Bill 15:39 3/13/2002 (0)
- Re: Roadfly vs. SIG! Chain Tensioner Question>& - jefrem 15:13 3/13/2002 (2)
  - Jefrem, did you see Gustave's write up on this? - Bill 16:01 3/13/2002 (1)
    - Re: Jefrem, did you see Gustave's write up on this - jefrem 18:36 3/13/2002 (0)
- WTF? No love here?????? - Bill 14:59 3/13/2002 (1)
  - If you can't find the answer, why not just torque - Jeff E 15:07 3/13/2002 (0)
WTB - Gray or Blue M3 (nt) - Frank 14:03 3/13/2002 (9)
- either Diamond or Silver - Frank 16:17 3/13/2002 (0)
- You must be talking about Lachssilber (url) - Dave 16:15 3/13/2002 (0)
- There is silver - Bry 15:25 3/13/2002 (0)
- There are no gray or blue E30 M3s... (url) - Keith in Seattle 14:17 3/13/2002 (5)
  - This list seems incomplete?....... - Derin 17:58 3/13/2002 (4)
    - Re: This list seems incomplete?....... - Roops 03:58 3/14/2002 (0)
    - U.S. list.... no blue or grey in the U.S. (nt) - John A 22:33 3/13/2002 (0)
    - And no one wants to sell me their car either! (nt) - Frank 18:29 3/13/2002 (0)
    - A U.S.-centric view, I'm afraid... (nt) - Keith in Seattle 18:03 3/13/2002 (0)
SCDA will be at "The Glen" on..... - eric_m3 13:58 3/13/2002 (0)
///M oil Cap (url) (nt) - Jon K 13:31 3/13/2002 (2)
- To each his own, but... - Keith in Seattle 15:30 3/13/2002 (1)
  - I have seen previous posts wanting the part # more - Jon K 22:35 3/13/2002 (0)
Searching for Al Read from Providence, RI - Gary 13:19 3/13/2002 (0)
AC Schnitzer part numbers needed! - DarranP 12:28 3/13/2002 (2)
- Re: Here's two out of three - MarkD 14:00 3/13/2002 (1)
  - Thanks Mark! - DarranP 14:06 3/13/2002 (0)
Resetting the SI Lights? (url) - S Bean 11:55 3/13/2002 (5)
- Re: Resetting the SI Lights? - Scott 12:24 3/14/2002 (0)
- Re: Only use special tool/ Piece of Wire. - AC 13:34 3/13/2002 (0)
- I`ve done it many times...I made a tool with...... - John A 13:33 3/13/2002 (0)
- I did it on my E36....it worked fine and was easy (url) - Jeff E 12:39 3/13/2002 (0)
- Re: Resetting the SI Lights? - David 87M3 12:16 3/13/2002 (0)
Oh my GOD you have to see these (ebay) (url) - Gary 88 Lachssilber 11:46 3/13/2002 (4)
- Just to think.............. - Randy '90M3/'85 euro M5 18:02 3/13/2002 (0)
- Looks like it belows in a civic think they would - fit in my 88 beater :)scott 325i 12:44 3/13/2002 (1)
  - belongs - fit in my 88 beater :)scott 325i 12:46 3/13/2002 (0)
- Re: Oh my GOD you have to see these (ebay) - Anthony 88 ///M3 12:20 3/13/2002 (0)
E30 M3 with E36 M3 Eng Help!!!!! - mteckboy 10:59 3/13/2002 (12)
- Re: My car value just went up a tick again! (nt) - eric_m3 08:40 3/14/2002 (0)
- Here ya go >>>> - JDELUNA 18:56 3/13/2002 (0)
- Re: E30 M3 with E36 M3 Eng Help!!!!! - Brett Anderson 11:21 3/13/2002 (7)
  - Im in VA - mteckboy 14:55 3/13/2002 (6)
    - Re: Im in VA at Bimmerworld - Wofford 13:26 3/18/2002 (0)
    - A guy who used to and still does on occasion - Jeff E 17:34 3/13/2002 (2)
      - By the way, he works for BimmerWorld now, in - Jeff E 09:17 3/14/2002 (0)
      - I think it's wofford69@hotmail.com - Jon K 22:39 3/13/2002 (0)
    - Re: Im in VA - Brett Anderson 16:58 3/13/2002 (0)
    - Re: Im in VA - Brett Anderson 16:57 3/13/2002 (0)
- Schneller 978.465.2002 - Jon K 11:05 3/13/2002 (1)
  - I second that. Mike Morris does great work. My car (url) - EricH 11:18 3/13/2002 (0)
Darren M here you go - David 87M3 10:55 3/13/2002 (1)
- thanks DAvid, I shall give them another calltoday - Darren M 05:32 3/14/2002 (0)
When you join the E30 M3 SIG what do you - TUD 09:23 3/13/2002 (12)
- That in itself would be enough! But . . . - TheSilberWeenie 09:33 3/13/2002 (11)
  - Re: That in itself would be enough! But . . . - Brett Anderson 11:18 3/13/2002 (7)
    - Re: That in itself would be enough! But . . . - TheSilberWeenie 15:06 3/13/2002 (2)
      - Re: That in itself would be enough! But . . . - Brett Anderson 17:03 3/13/2002 (1)
        
        Re: That in itself would be enough! But . . . - Filippo Morelli 18:00 3/14/2002 (0)
    - Who is left? Don Fields, for one (nt) - John A 13:22 3/13/2002 (2)
      - For how much longer? ;-) - Brett Anderson 17:04 3/13/2002 (1)
        
        Only the E30 M3 gods know for sure...Just don`t .. - John A 22:36 3/13/2002 (0)
    - Re: That in itself would be enough! But . . . - John A 13:19 3/13/2002 (0)
  - Thought there was also a sticker? - TUD 09:46 3/13/2002 (2)
    - Re: Thought there was also a sticker? - Onrails 10:01 3/13/2002 (1)
      - When is SIG fest in NJ this Year? and - Andrew 10:37 3/13/2002 (0)
Maximillian? - Andrew Roane 08:16 3/13/2002 (3)
- The website is still under contruction... - Matt S 08:44 3/13/2002 (1)
  - they are too busy with cust. svc and great prices - B. Wheaton 22:24 3/13/2002 (0)
- Re: Maximillian? (url) - Jeff E 08:24 3/13/2002 (0)
Here we go again with fuel prices!!! (nt) - David 87M3 07:20 3/13/2002 (7)
- What's everyone paying on the mainland? ... - Jeff87is 23:42 3/13/2002 (0)
- SPRING BREAK, guaranteed traveling for kids.. - adam 14:37 3/13/2002 (0)
- San Diego gas is 30 cents more than L.A. - JPL 09:23 3/13/2002 (0)
- Re: Here we go again with fuel prices!!! - Darren M 09:20 3/13/2002 (1)
  - RE AON... Read on please i may help you - David 87M3 10:35 3/13/2002 (0)
- Funny,you mentioned that - Randy'90M3/'85euroM5 07:53 3/13/2002 (1)
  - Re: Funny,you mentioned that - David 87M3 08:57 3/13/2002 (0)
look at the paint job on this (url) - David 87M3 07:19 3/13/2002 (1)
- i think it pissed someone off (pic) - M325IX/88M3 07:39 3/13/2002 (0)
Euro 635csi DINAN for sale on ebay... (url) - G-ZIGN 01:23 3/13/2002 (0)
===>North America M3 Meet<=== - M3RNO1 22:41 3/12/2002 (5)
- the BMW SIG has one every year in Jersey.(nt) - Nick-NY 07:51 3/13/2002 (4)
  - Re: the BMW SIG has one every year in Jersey.(nt) - Onrails 08:46 3/13/2002 (3)
    - I stopped counting at 58 cars (nt) (nt) - Magnus! 09:06 3/13/2002 (2)
      - Re: I stopped counting at 58 cars (nt) - pete b 10:43 3/13/2002 (1)
        
        Re: I stopped counting at 58 cars (nt) (pic) (nt) - Chris F. 17:00 3/13/2002 (0)
Mechanic in Tuscon, AZ? - Don't wanna buy a money pit 22:12 3/12/2002 (1)
- Re: Mechanic in Tuscon (spelling), AZ? - ///M 20:39 3/13/2002 (0)
Does anyone have pics of m 10 spokes on their car? - Mark B. 22:08 3/12/2002 (1)
- I have them on my car but no pics- wish I did... (nt) - Doug 10:03 3/13/2002 (0)
Just moved to Marina Del Ray/ Anyone here? - Kasra Ajir 21:45 3/12/2002 (8)
- When are you comng back KAZ? :( .... - ADA///M 10:58 3/13/2002 (1)
  - Re: When are you comng back KAZ? :( .... - Kasra Ajir 00:23 3/14/2002 (0)
- Re: Just moved to Marina Del Ray/ Anyone here? - Barry Robinson 01:20 3/13/2002 (0)
- Re: Just moved to Marina Del Ray/ Anyone here? - jwilberdog 00:28 3/13/2002 (4)
  - Re: Just moved to Marina Del Ray/ Anyone here? (url) - jwilberdog 00:31 3/13/2002 (3)
    - Re: Just moved to Marina Del Ray/ Anyone here? - Kurt 12:30 3/13/2002 (0)
    - Re: Just moved to Marina Del Ray/ Anyone here? - Mpower 04:47 3/13/2002 (1)
      - Re: Just moved to Marina Del Ray/ Anyone here? - Kasra Ajir 00:21 3/14/2002 (0)
Brake Fluid Light - Davek 20:24 3/12/2002 (1)
- Re: Brake Fluid Light - roger j 02:34 3/13/2002 (0)
89 M3 ECU NEEDED NOW!!!!!!!!!!!!!!! - jager 20:02 3/12/2002 (1)
- whats wrong with it?(nt) - David 87M3 03:57 3/13/2002 (0)
89 M3 ECU NEEDED NOW!!!!!!!!!!!!!!! - jager 20:00 3/12/2002 (0)
89 M3 ECU NEEDED NOW!!!!!!!!!!!!!!! - jager 19:59 3/12/2002 (1)
- Re: 89 M3 ECU NEEDED NOW!!!!!!!!!!!!!!! - ///M 20:35 3/13/2002 (0)
EXPERIENCE IS A GOOD TEACHER DON'T F WIT TLG - jager 19:50 3/12/2002 (4)
- try Bill RUTDNERS ON SUNRISE HWY IN FREEPORT - Mel 13:33 3/13/2002 (1)
  - I agree. Rudtner's where it's at. - ryans 00:47 3/14/2002 (0)
- Don't know how those clowns call themselves....... - Randy'90M3/'85euroM5 08:04 3/13/2002 (0)
- Which seals on the diff were changed? - ADA///M 20:34 3/12/2002 (0)
INSTALLATION MANUAL FOR ANGEL EYES ON THE E30 - Levio 16:48 3/12/2002 (1)
- Be patient, my A/eyes will arrived in two weeks - Jose Perez 17:28 3/12/2002 (0)
All UK owners please read.... - Rhidian 16:15 3/12/2002 (2)
- Re: All UK owners please read.... (url) - Gsan 15:43 3/18/2002 (0)
- thanks for the offer, i dont need anything - David 87M3 03:59 3/13/2002 (0)
F1 DRIVER(MARC GENE)WITH M3 E30 (url) - DANIEL SOSPEDRA 14:28 3/12/2002 (0)
F1 DRIVER(MARC GENE)WITH M3 E30 - DANIEL SOSPEDRA 14:27 3/12/2002 (0)
leather seat questions - dave clark 14:01 3/12/2002 (2)
- Re: leather seat questions - Rhys 19:31 3/12/2002 (0)
- http://www.leatherique.com/ - Jon K 14:16 3/12/2002 (0)
FS Alpina M3 wheels - John R Blk/Blk M5, 13:07 3/12/2002 (0)
E30 supercharger? - mteckboy 12:42 3/12/2002 (4)
- Re: E30 supercharger? - Jim Tappan 01:59 3/13/2002 (2)
  - Re: E30 supercharger? - David Kao 23:27 3/13/2002 (0)
  - Joined the forced induction M3 list - Gary H 03:39 3/13/2002 (0)
- ertcat@aol.com has a supercharger for E-30 (6K) - Jose Perez 18:08 3/12/2002 (0)
e30 m3 new owner?M3 sites needed - mteckboy 12:39 3/12/2002 (1)