bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 12

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 12
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

Weird starting problem - Clarke 23:58 3/31/2002 (3)
- Re: Weird starting problem - Damian 05:27 4/01/2002 (0)
- Starter solenoid contacts maybe bad - Jake 00:54 4/01/2002 (1)
  - Re: Starter solenoid contacts maybe bad - Angus 11:42 4/01/2002 (0)
Will 235/40s clear ok on a 17x8 offset 20? - WOTjunkie 23:04 3/31/2002 (6)
- Re: Will 235/40s clear ok on a 17x8 offset 20? - Dave 07:51 4/01/2002 (5)
  - Re: Will 235/40s clear ok on a 17x8 offset 20? - Drew_Houston 14:42 4/01/2002 (0)
  - Dave Let us know if it clears...That's the setup I - Pat Chiang 14:40 4/01/2002 (3)
    - Works great on my car. Only rubs when fully lockd - Barry Robinson 17:02 4/01/2002 (2)
      - That's what I've been told - Dave 09:11 4/02/2002 (1)
        
        Re: That's what I've been told - Barry Robinson 14:45 4/02/2002 (0)
Anyone have some grey front seats for sale? - WOTjunkie 22:48 3/31/2002 (1)
- Re: Anyone have some grey front seats for sale? - Damian 23:34 3/31/2002 (0)
arm rest with storage found for our cars.. (url) (nt) - adam 22:45 3/31/2002 (0)
Seats F/S - MichaelH 22:41 3/31/2002 (1)
- these seats are perfect!!!!! I have seen them.. - adam 23:02 3/31/2002 (0)
BMW CCA Oktoberfest - this July in Colorado... (url) - Doug G 22:12 3/31/2002 (0)
What would a 4.75 rear feel like? (nt) - HANDBLT 21:40 3/31/2002 (1)
- Re: Take both hands and put in your back pockets.. - eric_m3 11:35 4/01/2002 (0)
Whats your water temp.? Please indicate if 2.5L,.. - jla 20:35 3/31/2002 (3)
- Re: Rob indicates what mine reads too... - eric_m3 11:37 4/01/2002 (0)
- do an actual temp check with a thermometer. - al 21:48 3/31/2002 (0)
- Re: Whats your water temp.? Please indicate if 2.5 - Mr. EVO 2.5 20:51 3/31/2002 (0)
Who has the best prices on EVO III Parts? (nt) - Steve 20:28 3/31/2002 (1)
- Dealerships still have alot of them.......... - HANDBLT 20:51 3/31/2002 (0)
Check Classifiead - 2.5L motor For Sale - Ron ///Man 19:11 3/31/2002 (0)
check (pic) - Mr. EVO 2.5 18:15 3/31/2002 (2)
- Re: check (pic) - Mr. EVO 2.5 19:53 3/31/2002 (1)
  - Re: check (pic) - Mr. EVO 2.5 19:55 3/31/2002 (0)
Feedback on Supersprint Racing center-pipe........ - SALD 18:03 3/31/2002 (3)
- Yes, nice difference at top end - Bill 14:03 4/01/2002 (1)
  - Thanks Bill, is it alot louder though? - SALD 20:03 4/01/2002 (0)
- RON MAN, have you used this??? - SALD 19:35 3/31/2002 (0)
Just had a drive of my friend's E30 318is.... - Derin 17:24 3/31/2002 (0)
Just had a drive of my friend's E30 318is.... - Derin 17:24 3/31/2002 (2)
- Re: Just had a drive of my friend's E30 318is.... (url) - Mr. EVO 2.5 17:37 3/31/2002 (1)
  - Here's my 318iS, it's fun, but no M3...=( (pic) - Jr 22:01 4/03/2002 (0)
oil cooler threading? - matt 17:23 3/31/2002 (0)
Beautiful E30 M3 - Jim South 16:01 3/31/2002 (6)
- thats was my 1st M3......until...(more) (pic) - Charley 17:54 3/31/2002 (5)
  - Re: thats was my 1st M3......until...(more) - Damian 23:46 3/31/2002 (1)
    - Its Cinnabar (eom) - Charley 00:44 4/01/2002 (0)
  - !!!! (nt) - george 23:42 3/31/2002 (0)
  - I need the front glass, bumper, grilles, etc/ (pic) - Jose Perez 22:58 3/31/2002 (0)
  - Re: thats was my 1st M3......until...(more) - Mr. EVO 2.5 18:11 3/31/2002 (0)
FS: 17" TSW Hockenheims - WOTjunkie 16:01 3/31/2002 (3)
- I may be interested in the trade for M 10 spokes. - Doug 17:08 4/01/2002 (0)
- where did you orginaly get those wheels?? - adam 16:03 3/31/2002 (1)
  - Came on the car, which came from Florida - WOTjunkie 22:41 3/31/2002 (0)
Cost of a 2.5L engine - Phil 14:30 3/31/2002 (2)
- Re: Cost of a 2.5L engine - Mr. EVO 2.5 15:19 3/31/2002 (0)
- Re: be more specific.... - eric_m3 14:48 3/31/2002 (0)
Side Indicators - Jeff Deakin 12:35 3/31/2002 (7)
- Re: Side Indicators - Darren M 15:33 3/31/2002 (0)
- Re: Side Indicators - Mr. EVO 2.5 15:22 3/31/2002 (4)
  - Re: like this (pic) - Darren M 15:38 3/31/2002 (3)
    - to bad there on reversed (nt) - chuck 22:50 3/31/2002 (1)
      - Re: to bad there on reversed - Darren M 13:10 4/01/2002 (0)
    - And without :o)...naughty naughty! (pic) - Derin 17:19 3/31/2002 (0)
- Side repeaters are on European spec cars (nt) - John A 14:10 3/31/2002 (0)
Final Houston-BMWCCA Concours next Sunday (url) (pic) - Geo 12:01 3/31/2002 (3)
- I think I might enter..how do you rate my chances? (url) - Derin 17:32 3/31/2002 (0)
- Re: Final Houston-BMWCCA Concours next Sunday - Geoff Lowe 13:49 3/31/2002 (1)
  - Re: Final Houston-BMWCCA Concours next Sunday - Geo 15:32 3/31/2002 (0)
Track days - Jeff Deakin 11:31 3/31/2002 (3)
- Re: Track days - bmg in the UK 14:01 3/31/2002 (1)
  - this is cancelled now apparently - Darren M 15:05 3/31/2002 (0)
- Re: Track days (url) - Geoff Lowe 13:47 3/31/2002 (0)
Engine noise - adrian P 07:44 3/31/2002 (7)
- Re: Engine noise - jeff 20:09 3/31/2002 (0)
- Re: These engines will make all kinds of.... - eric_m3 14:53 3/31/2002 (0)
- Noisy injector (nt) - John A 14:11 3/31/2002 (2)
  - Re: Noisy injector (nt) - Mikey B 03:27 4/01/2002 (0)
  - Re: yeah sure.... - eric_m3 14:49 3/31/2002 (0)
- Re: Engine noise - DarranP 10:59 3/31/2002 (1)
  - Re: Engine noise - bmwtbg 13:58 3/31/2002 (0)
Ugliest M3 in the world??? - Ed 06:13 3/31/2002 (0)
What's the part no. of Evo intake tube? Just want - jla 00:48 3/31/2002 (1)
- 13-71-1-308-838 (nt) - John A 14:06 3/31/2002 (0)
Magnus - what was the end result on the Sparco Bar (nt) - AC 00:15 3/31/2002 (1)
- I took a time-out. Haven't tried again yet. (nt) - Magnus! 21:39 3/31/2002 (0)
Getting new fan clutch... is there a comparable - jla 23:27 3/30/2002 (4)
- Re: Getting new fan clutch... is there a comparabl - bmwtbg 15:23 3/31/2002 (0)
- Re: Yes! - MarkPike 00:00 3/31/2002 (2)
  - Re: Yes! - jla 00:44 3/31/2002 (1)
    - Re: - MarkPike 08:38 3/31/2002 (0)
Kumo V700 review.... - Mike 22:30 3/30/2002 (0)
E30 M3 V-8 - Bob Heacox 22:15 3/30/2002 (2)
- Re: E30 M3 V-8 - bmwtbg 15:21 3/31/2002 (0)
- Re: E30 M3 V-8 - geofflowe 05:56 3/31/2002 (0)
Car fax please ;) e34 M5 - adam 19:40 3/30/2002 (0)
Engine won't start - daves 18:05 3/30/2002 (8)
- Re: Engine won't start - DarranP 15:57 3/31/2002 (2)
  - Re: Engine won't start - daves 07:59 4/02/2002 (0)
  - Re: Engine won't start - daves 07:42 4/01/2002 (0)
- Re: Engine won't start - ROB89M3 18:10 3/30/2002 (4)
  - Just to be clear can the engine turn over at all? - dhs 19:27 3/30/2002 (3)
    - Re: Just to be clear can the engine turn over at a - daves 19:54 3/30/2002 (2)
      - Re: Just to be clear can the engine turn over at a - ROB89M3 21:33 3/30/2002 (1)
        
        Re: Just to be clear can the engine turn over at a - daves 07:35 4/01/2002 (0)
Track day brake solution (UK) + pads (url) - Geoff Lowe 15:13 3/30/2002 (5)
- Re: Track day brake solution (UK) + pads - Neil M 07:13 4/02/2002 (0)
- Re: Track day brake solution (UK) + pads - Darren M 16:15 3/30/2002 (3)
  - Re: Track day brake solution (UK) + pads - stu 10:18 4/01/2002 (0)
  - Re: Track day brake solution (UK) + pads (url) - Geoff Lowe 17:42 3/30/2002 (1)
    - Avoid Hi-Spec like the plauge... - Jim 20:32 3/31/2002 (0)
where to get a trunk latch - jimh 14:39 3/30/2002 (1)
- Re: where to get a trunk latch I HAVE ONE - AL 15:45 3/30/2002 (0)
Oil cap painted. (pic) - Damian 14:28 3/30/2002 (0)
timing chain replacement in the UK - bmg in the UK 13:56 3/30/2002 (6)
- Where do you live ? - Neil M 07:15 4/02/2002 (0)
- Re: timing chain replacement in the UK - Damian 23:51 3/31/2002 (0)
- Re: timing chain replacement in the UK - David 87M3 09:01 3/31/2002 (0)
- Re: timing chain replacement in the UK - Damian 14:33 3/30/2002 (2)
  - Re: timing chain replacement in the UK - bmg in the UK 16:04 3/30/2002 (0)
  - Re: timing chain replacement in the UK (url) - Geoff Lowe 15:09 3/30/2002 (0)
Sparco seats? (nt) - MichaelH 13:00 3/30/2002 (8)
- If you buy Sparco seats... (url) - MarkPike 18:11 3/30/2002 (4)
  - Anyone used the Corbeau Carrera's? - MichaelH 22:12 3/30/2002 (0)
  - WHAT (M) (pic) - adam 19:28 3/30/2002 (2)
    - The targa seems nice, any input? (pic) - adam 19:31 3/30/2002 (1)
      - The Targa are the ones I returned. (pic) - MarkPike 21:51 3/30/2002 (0)
- Stupid enter key...Re: Sparco seats? (m) - MichaelH 13:02 3/30/2002 (2)
  - I have not found any traces of rice in my seats... (url) (pic) - KevinS 13:08 3/30/2002 (1)
    - I like them too (url) (pic) - MichaelH 16:19 3/30/2002 (0)
* AC Schnitzer, Hamann, Supersprint & more Parts * - GAS 12:45 3/30/2002 (0)
Play in seats + SRD Questions - george 11:21 3/30/2002 (2)
- recaro srds do recline for rear seat access....... - john///m3 11:35 3/30/2002 (1)
  - Thanks! (nt) - george 12:07 3/30/2002 (0)
Any here running 17x8/17x9 BBS RCs..Question - J.M3 10:21 3/30/2002 (0)
E30 M3 4 or 6 cyl? Thx, visitor from E36 M3 board (nt) - LUNI2NZ 09:18 3/30/2002 (5)
- Re: Most board member know what to expect from.... - eric_m3 14:55 3/31/2002 (2)
  - Calm down!!! (more) - DarranP 15:59 3/31/2002 (1)
    - Re: DArran, I was not yelling, hence no... - eric_m3 12:59 4/01/2002 (0)
- 2.3L, 4 banger (nt) (nt) - Phil 09:40 3/30/2002 (1)
  - Thanks. Jay - LUNI2NZ 09:52 3/30/2002 (0)
think you could put an entire M coupe' susp....... - sev7488 05:35 3/30/2002 (0)
Front hub - barry (uk) 04:53 3/30/2002 (1)
- Yep, this is a no brainer- 535i hub all the way. (nt) - george 12:10 3/30/2002 (0)
Redline MTL really works! - Jake Beggy 04:48 3/30/2002 (0)
Looks like your car? (pic) - Damian 02:58 3/30/2002 (0)
Anybody going to the 'ring today? (nt) - Ed 02:53 3/30/2002 (0)
What can you tell about your engine from... - Phillip 02:41 3/30/2002 (1)
- Re: quite a bit actually.... - eric_m3 13:02 4/01/2002 (0)
Who has the best price on Euro Elipsoids? - Phillip 02:40 3/30/2002 (2)
- Re: Who has the best price on Euro Elipsoids? - Damian 02:50 3/30/2002 (1)
  - www.abrahamsmotorsport.com (eom) - Barry Robinson 12:24 3/30/2002 (0)
still looking for those yellow lenses (pic) - Damian 23:18 3/29/2002 (3)
- Call Paul @ Maximillian PN see text..... - Erik Brannfors - Seattle M3 14:14 3/30/2002 (0)
- Maybe this is what you are looking for??? (url) - Jon K 07:09 3/30/2002 (0)
- That looks exactly like my car! - YJ 00:46 3/30/2002 (0)
Looking for a beat up Red M3 - Damian 23:12 3/29/2002 (0)
A/C weighs over 70 lbs? - Damian 23:09 3/29/2002 (4)
- good choice - zak 88 diamandzwart 08:00 3/30/2002 (0)
- Re: A/C weighs over 70 lbs? - Damian 02:54 3/30/2002 (0)
- Re: A/C weighs over 70 lbs? - TTW 23:31 3/29/2002 (1)
  - Re: A/C weighs over 70 lbs? - TTW 23:35 3/29/2002 (0)
Post pics of your cars, i love these M3's!!!! (nt) - Angelo 21:10 3/29/2002 (1)
- http://www.m3bmw.com/ - Josh ///88 21:29 3/29/2002 (0)
Feedback on cat/resonator replacement pipe.... - SALD 20:48 3/29/2002 (2)
- Re: Feedback on cat/resonator replacement pipe.... - RJ 12:52 3/31/2002 (1)
  - Thanks RJ! Are you running it? How loud? - SALD 17:53 3/31/2002 (0)
To NICK from NY - Bing 19:00 3/29/2002 (1)
- Not really necessary but... - Nick-NY 20:55 3/29/2002 (0)
parts wanted - tony 18:32 3/29/2002 (0)
differences in years: 88 vs 91 - Castle 16:34 3/29/2002 (5)
- Woohoo a NEW question.... :) (nt) - ADA///M 21:05 3/29/2002 (1)
  - Re: DITTO, check the archives please! - eric_m3 14:56 3/31/2002 (0)
- Airbag - Jose Perez 20:49 3/29/2002 (0)
- I know of one - Josh ///88 20:24 3/29/2002 (0)
- 3. (nt) - EricH 17:32 3/29/2002 (0)
Tool kit (UK Guys) - Jon/90M3 16:24 3/29/2002 (5)
- Re: Tool kit (UK Guys) - barry 04:43 3/30/2002 (0)
- Re: Tool kit (UK Guys) - Jon/90M3 03:37 3/30/2002 (0)
- Re: Tool kit (UK Guys) - DarranP 02:11 3/30/2002 (2)
  - Re: Tool kit (UK Guys) - Jon/90M3 03:33 3/30/2002 (1)
    - Re: Tool kit (UK Guys) - stu 06:23 4/01/2002 (0)
Just bought the RSII's 18x8.5 22mm - Gary 88 Lachssilber 16:18 3/29/2002 (2)
- good choice gary :) (nt) - john///m3 11:38 3/30/2002 (0)
- We Want Pics! Lets See 'Em :) (pic) - D///M3 19:00 3/29/2002 (0)
Any body bought have Evo III fenders & liners? - PJ 15:53 3/29/2002 (2)
- Evo 3 Fenders & Liners (pic) - D///M3 18:43 3/29/2002 (0)
- D///M did a write up on them. (url) - MarkPike 16:35 3/29/2002 (0)
? on Adjustable Sway Bar Links - required on? - Bart 15:51 3/29/2002 (4)
- Re: I do not believe you will need these.... - eric_m3 19:27 3/29/2002 (3)
  - Re: I do not believe you will need these.... - Bart 20:07 3/29/2002 (1)
    - Re: Replace one w/ an adjustable link to... - eric_m3 14:58 3/31/2002 (0)
  - Re: I do not believe you will need these.... - Bing 20:06 3/29/2002 (0)
Ground Control Spring Rates and Tokico Illuminas - '88 2.5L 12:44 3/29/2002 (6)
- Re: Ground Control Spring Rates and Tokico Illumin - Franklin 19:51 3/29/2002 (0)
- Re: Ground Control Spring Rates and Tokico Illumin (pic) - ROB89M3 15:53 3/29/2002 (2)
  - Re: Ground Control Spring Rates and Tokico Illumin - Carlos 19:20 3/29/2002 (0)
  - your fricking teeth are going to chatter on bumps - adam 17:25 3/29/2002 (0)
- Re: Ground Control Spring Rates and Tokico Illumin - Pat Chiang 15:05 3/29/2002 (0)
- Tokico's are good shocks and you should read - adam 13:13 3/29/2002 (0)
Does adjustable Fuel pressure regulators works? - Jose Perez 12:39 3/29/2002 (1)
- Re: Does adjustable Fuel pressure regulators work (pic) - ROB89M3 15:58 3/29/2002 (0)
I cant tell if my auxilirary (electric) fan works - Gary 88 Lachssilber 10:15 3/29/2002 (3)
- Thanks ...... It works, Explaination (More) - Gary 88 Lachssilber 14:11 3/29/2002 (0)
- should come on when you turn on the A/C (nt) - MarkPike 11:25 3/29/2002 (1)
  - Re: should come on when you turn on the A/C - Bry 12:29 3/29/2002 (0)
WTB ETK cd. - ryans 09:38 3/29/2002 (0)
Type of cars we race.... - Noel 09:20 3/29/2002 (12)
- In Portland, Oregon..... - stevetall 02:10 3/30/2002 (0)
- when it comes to showing up other cars,..... - Josh ///88 23:28 3/29/2002 (0)
- I got nothing to prove on a street but... - Lee 21:29 3/29/2002 (0)
- Racing is for the track. - EricH 12:43 3/29/2002 (0)
- constabulary cars or anyone without insurance... - Billy Ray 09:29 3/29/2002 (1)
  - ewww....sorry about that mess... - Billy Ray 09:30 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
- Re: Type of cars we race.... - Billy Ray 09:28 3/29/2002 (0)
Re: UK Guys - Water Temp Guage behaviour pattern - MarkD 05:48 3/29/2002 (3)
- This just started happening on mine...I will have - jla 23:26 3/30/2002 (0)
- Fan Clutch? (nt) - MarkPike 11:58 3/29/2002 (0)
- Same on mine, normal Ithink - John W 07:14 3/29/2002 (0)
Re: High Idle Speed on cold startup - MarkD 05:40 3/29/2002 (1)
- Re: High Idle Speed on cold startup - MarkPike 11:26 3/29/2002 (0)
Hey guys, what about my car ? (url) - tammy24 01:46 3/29/2002 (2)
- don't open it. It recursively multiplies browser - windows -- kisalex 02:09 3/29/2002 (0)
- SPAM! DONOT OPEN. YOU WILL REGRET OPENING IT. (nt) - MMM!!!!!!!!!!!!!! 01:58 3/29/2002 (0)
headlight options - TTW 00:22 3/29/2002 (0)
M contour 4 lug??? - Matt 00:07 3/29/2002 (0)
FS: 1990 M3 75k diamond black - mike 23:02 3/28/2002 (0)
FS: 1990 M3 75k diamond black - mike 22:57 3/28/2002 (1)
- pic - Nizzle 22:59 3/28/2002 (0)
very cool game... (url) - Cosmic 20:56 3/28/2002 (0)
FS: 88 E30 M3 88.6K Cinnabar, Original - Dan 20:03 3/28/2002 (1)
- more information would be helpful - Bruce 21:27 3/28/2002 (0)
Make offer......... (pic) (nt) - HANDBLT 19:46 3/28/2002 (9)
- $1.50 for the paper towels, final offer. - EricH 12:45 3/29/2002 (0)
- Seat - Ji///M 07:40 3/29/2002 (0)
- how much for the gold door knob-need one bad... - rs 23:42 3/28/2002 (0)
- What are you looking for? - Rob 22:36 3/28/2002 (0)
- Does the cooler have any beer in it? (nt) - Jim 21:25 3/28/2002 (0)
- Re: Make offer......... - Gerard 20:02 3/28/2002 (3)
  - $2.75 for the bicycle pump (outbidding Gerard) - MacLeod C. 20:56 3/28/2002 (2)
    - I'll bid $3.00 for the bike pump! - EricH 12:46 3/29/2002 (1)
      - Re: I'll bid $3.00 for the bike pump! - rs 10:04 3/30/2002 (0)
Sun roof service question - S. Bean 18:35 3/28/2002 (0)
Bimmergate picnic on June 2................... - Bryan in DE 17:47 3/28/2002 (0)
Track days at castle combe - Jeff Deakin 17:31 3/28/2002 (0)
Where's the best place 2 get ducts & towhook cvrs? (nt) - PJ 17:16 3/28/2002 (2)
- Maximillian`s for the tow hook covers............. - John A 23:27 3/28/2002 (0)
- Re: click the link (url) - eric_m3 19:45 3/28/2002 (0)
Overkill? - Darren M 16:08 3/28/2002 (2)
- using correct tire size, there will be no problem. - Jose Perez 16:30 3/28/2002 (0)
- Agreed - Anthony 88 ///M3 16:19 3/28/2002 (0)
rear control arm bushings removal - Tony 14:52 3/28/2002 (2)
- Here's link to neat site for E30 maintenance FYI (url) (nt) - SteveS 15:33 3/28/2002 (1)
  - Thanks Steve - Tony 19:13 3/28/2002 (0)
Sanding down chrome kidney grill (pic) - Anthony 88 M3 14:04 3/28/2002 (5)
- Scuff only, then use PJ1 Fast Black, no chips yet (nt) - zak 88 diamandzwart 09:31 3/29/2002 (0)
- There is an alloy kidney surrounds also - Thomas 01:54 3/29/2002 (0)
- Re: Sanding down chrome kidney grill - chrisT 18:22 3/28/2002 (0)
- Pretty Easy - Jon K 15:17 3/28/2002 (0)
- I would say 400 or 600. Did mine but ...(m) - Doug 14:49 3/28/2002 (0)
who of u would buy a BIG BRAKE setup from me - Mel 12:58 3/28/2002 (9)
- Big Reds suck!!! Lotus brembo calipers much better - m3pedro 01:58 3/29/2002 (0)
- Big Reds suck!!! Lotus brembo calipers much better - m3pedro 01:56 3/29/2002 (1)
  - He he.. - Denis 13:45 3/29/2002 (0)
- Re: who of u would buy a BIG BRAKE setup from me - Andrie 01:08 3/29/2002 (0)
- I would prefere to go with a more reputable - adam 14:37 3/28/2002 (4)
  - Follow the link inside for 1899.00 (url) - Jon K 15:02 3/28/2002 (2)
    - thats the lousy LOTUS caliper - Mel 15:21 3/28/2002 (1)
      - Hmmmm - KevinS 17:00 3/28/2002 (0)
  - true.. - mel 14:40 3/28/2002 (0)
Make Offer............... - HANDBLT 12:47 3/28/2002 (1)
- Re: Email - HANDBLT 12:48 3/28/2002 (0)
All Hartge "Special Offer" 17" wheels sold out... - jefrem 10:11 3/28/2002 (1)
- Yup - they replied very quickly, but no wheels :-( - Doug G 12:25 3/28/2002 (0)
Are these center locks? (pic) (nt) - HANDBLT 09:54 3/28/2002 (1)
- Nope. - KevinS 10:00 3/28/2002 (0)
Goodwood Track day this weekend ? (url) (pic) - Neil M 08:53 3/28/2002 (6)
- Re: Goodwood Track day this weekend ? - Darren M 09:39 3/28/2002 (5)
  - Re: Goodwood Track day this weekend ? - Neil M 10:08 3/28/2002 (4)
    - Re: Goodwood Track day this weekend ? - Darren M 10:12 3/28/2002 (3)
      - Ta :-) - Neil M 11:26 3/28/2002 (2)
        
        Re: Ta :-) - DarranP 11:47 3/28/2002 (1)
        
        Re: Ta :-) (url) (pic) - Geoff Lowe 16:51 3/28/2002 (0)
What is the blue ignition box............. (pic) - HANDBLT 07:46 3/28/2002 (7)
- Re: What is the blue ignition box............. - Stan 08:00 3/28/2002 (6)
  - hmm...Jacob's ULTRA coil is compatible w/Motronic. - AlD 09:03 3/28/2002 (5)
    - "very surprised at the performance gains" - Stan 09:11 3/28/2002 (4)
      - What do you have Stan? - HANDBLT 09:44 3/28/2002 (3)
        
        Try some archive searches for more detail..(NT) - Stan 09:51 3/28/2002 (2)
        
        Re: Tried a search under your name... no luck (nt) - HANDBLT 10:25 3/28/2002 (1)
        
        Oh be helpful Stan! He has Maf and only uses -> (nt) - Rocket fuel! 130 octane! :) Magnus 17:03 3/29/2002 (0)
Anyone interested in a New Motion Pro deluxe $58+ - AC 02:35 3/28/2002 (2)
- What is it? - HANDBLT 07:44 3/28/2002 (1)
  - Its used to sync. throttle bodies (eom) - Charley 11:19 3/28/2002 (0)
Sport evolution fender/wing for sale... - Ed 02:28 3/28/2002 (1)
- question - Adam P 18:20 3/28/2002 (0)
where can I buy angel eyes kit for E30's????? (nt) - sev7488 02:13 3/28/2002 (3)
- Re: where can I buy angel eyes kit for E30's????? - Jose Perez 16:40 3/28/2002 (0)
- Re: next week i get 5 sets of them - Markus 12:48 3/28/2002 (1)
  - Markus,do U have any good pic of them on a e30 M3? (nt) - LV (OO=[][]=OO) 15:04 3/28/2002 (0)
15" cross spoke M3 wheels for swap/sale (url) - Geoff Lowe 01:28 3/28/2002 (0)
sweet pic charley!!! (url) (nt) - scrv1 23:51 3/27/2002 (5)
- thanks (n/m) - Charley 10:14 3/28/2002 (0)
- Re: sweet pic charley!!! (url) - Gary H 06:53 3/28/2002 (0)
- Re: sweet pic charley!!! (url) - Gary H 06:53 3/28/2002 (2)
  - Re: sweet pic charley!!! (url) - Gary H 06:55 3/28/2002 (1)
    - Nice Ty...beaten any ferarris? :cD - Ben Moore 22:35 3/28/2002 (0)
Oil viscosity and types - Jake Beggy 23:39 3/27/2002 (7)
- Redline MTL will significantly improve............ - John A 00:13 3/28/2002 (6)
  - ATF will leak out quicker than MTL............ - John A 23:18 3/28/2002 (0)
  - Re: Redline Automatic Trans Fluid....... - Glenn 10:03 3/28/2002 (3)
    - Wait, ATF in your manual???? - Jacko 12:08 3/28/2002 (2)
      - not that it matters on E30s, but... - Bruce 22:52 3/28/2002 (0)
      - Re: YUP. Later production came w/ this standard... - eric_m3 19:47 3/28/2002 (0)
  - Be sure to use Redline 85W90 not Redline 85W90NS. - JPL 09:32 3/28/2002 (0)
CAn someone with Sparco Steel strut barce......... - Magnus! 22:24 3/27/2002 (30)
- Mine fit right on!! - Wesley 19:42 3/28/2002 (0)
- Re: CAn someone with Sparco Steel strut barce..... - Randy Walters 09:03 3/28/2002 (0)
- now this is why i don't get one - Mel 08:53 3/28/2002 (13)
  - Re: now this is why i don't get one - Randy Walters 09:16 3/28/2002 (12)
    - good points - Mel 10:21 3/28/2002 (11)
      - Re: Mel, what exactly do you do w/ your car? - eric_m3 11:16 3/28/2002 (10)
        
        Eric are u Eric Miller? - Mel 11:39 3/28/2002 (7)
        
        Re: Save for a gruppe A cage, well yeah but - eric_m3 19:53 3/28/2002 (1)
        
        WE WOUDL EASILY SPEND $2000 FOR WHEELS THOUGH??? - Mel 21:52 3/29/2002 (0)
        
        Countries free, surface area is MONEY! (nt) - Magnus! 13:16 3/28/2002 (1)
        
        u wanna play , u gotta pay :) - mel 14:02 3/28/2002 (0)
        
        100 verse 3000+K.. no way.. - adam 12:45 3/28/2002 (2)
        
        sure somethings in life are worth it - Mel 12:56 3/28/2002 (1)
        
        Re: Mel, please contact Ron Checca for a.... - eric_m3 19:56 3/28/2002 (0)
        
        here u go - Mel 11:28 3/28/2002 (1)
        
        Re: Please fill us in some more Mel.... - eric_m3 06:55 3/29/2002 (0)
- Re: - MarkPike 08:32 3/28/2002 (0)
- we will try jacking her up from the crossmember - Nick-NY 07:51 3/28/2002 (0)
- Re: CAn someone with Sparco Steel strut barce..... - Derek 01:25 3/28/2002 (0)
- maybe try Nick's bar... - C///MR 00:46 3/28/2002 (0)
- With an Eibach brace installed, mine measures..... - John A 00:25 3/28/2002 (3)
  - Re: With an Eibach brace installed, mine measures. (url) - Geoff Lowe 01:32 3/28/2002 (0)
  - Hhhhmmm? I have 43.5"? (nt) - Magnus 00:43 3/28/2002 (1)
    - Sounds like your bar is too long (nt) - John A 00:51 3/28/2002 (0)
- Mine fit perfectly. - Barry Robinson 23:35 3/27/2002 (1)
  - Darn Bragger! You trying to make me feel good?:) (nt) - Magnus 23:50 3/27/2002 (0)
- I had to cut mine in the middle to get it to fit - adam 23:24 3/27/2002 (0)
- has your car be tracked!!!! - blu74tii 23:18 3/27/2002 (2)
  - Hello! I need a measurement please...........(M) - Magnus 23:48 3/27/2002 (1)
    - Re: 36 7/8" from the outer edges of the holes. - AC 02:24 3/28/2002 (0)
1988 M6 (I know) Power Steering R&R...... (url) - Erik Brannfors - Seattle M3 21:59 3/27/2002 (4)
- Re: 1988 M6 (I know) Power Steering R&R...... - anthony 11:55 3/28/2002 (0)
- amazing to see how similar the motors are.. - adam 22:06 3/27/2002 (2)
  - they just cut the head on a 6 for the prototype - M3 Repete 15:39 3/28/2002 (0)
  - Same bore, same stroke, same valves............... - John A 00:32 3/28/2002 (0)
Hartge wheels for our cars! (url) - m3lachsilber 20:02 3/27/2002 (5)
- Re: Hartge wheels for our cars! - SamE30 M3 07:20 3/28/2002 (0)
- Re: Hartge wheels for our cars! - Bruce 21:39 3/27/2002 (0)
- Re: Hartge wheels for our cars! (url) (pic) - ROB89M3 20:15 3/27/2002 (2)
  - 3-piece 17 x 8.5 ET 25 for $200 cdn each... - Lee 22:50 3/27/2002 (0)
  - Re: Hartge wheels for our cars! - Rob 20:43 3/27/2002 (0)
Wheel Question - Rob 19:44 3/27/2002 (1)
- Re: Wheel Question - Randy Walters 08:24 3/28/2002 (0)
Adjustable gas regulator, work or not?? - Jose Perez 19:28 3/27/2002 (0)
a few short E30 M3 videos (url) (pic) - B. Wheaton 17:09 3/27/2002 (0)
Whee heee (UK style) (url) - Geoff Lowe 16:27 3/27/2002 (10)
- Re: Whee heee (UK style) - Roops 04:59 3/28/2002 (0)
- Re: Whee heee (UK style) - DarranP 17:37 3/27/2002 (0)
- How much did it cost?????????? - DarranP 17:32 3/27/2002 (0)
- Re: Whee heee (UK style) - DarranP 17:28 3/27/2002 (3)
  - Re: Whee heee (UK style) - Geoff Lowe 01:24 3/28/2002 (2)
    - Re: Whee heee (UK style) - DarranP 02:29 3/28/2002 (1)
      - Re: Whee heee (UK style) - Geoff Lowe 03:22 3/28/2002 (0)
- Re: Whee heee (UK style) - Rhidian 17:05 3/27/2002 (1)
  - Re: Whee heee (UK style) - Geoff Lowe 17:28 3/27/2002 (0)
- Re: Whee heee (UK style) - Geoff Lowe 16:28 3/27/2002 (0)
Radio fader question - scott bean 16:21 3/27/2002 (11)
- Re: Radio fader question - s.bean 11:11 3/29/2002 (1)
  - Re: Radio fader question - Randy Walters 22:34 3/29/2002 (0)
- Re: Radio fader question - Randy Walters 08:26 3/29/2002 (0)
- Re: Radio fader question - s.bean 07:18 3/29/2002 (0)
- Must be wrong radio?? - S. Bean 18:39 3/28/2002 (2)
  - ooops, corrected pictures here.... (url) (pic) - Randy Walters 23:31 3/28/2002 (0)
  - Re: Must be wrong radio?? (url) (pic) - Randy Walters 23:28 3/28/2002 (0)
- Re: Radio fader question - Randy Walters 08:30 3/28/2002 (0)
- What year is your M3 ???? - RandyM3/M5 19:58 3/27/2002 (2)
  - Re: What year is your M3 ???? - S. Bean 20:45 3/27/2002 (1)
    - '88 fader in dash,'89 >on the radio - RandyM3/M5 18:10 3/28/2002 (0)
Well it's no surprise why I've got cracks in my - Jeff E. 14:51 3/27/2002 (3)
- Well Jeff, I can't believe it either. I looked - Tony 18:34 3/30/2002 (1)
  - Tony - I'm getting my car repaired this week... - Jeff E 09:49 4/02/2002 (0)
- Re: Well it's no surprise why I've got cracks in m - jefrem 21:35 3/27/2002 (0)
Why can't spacers be permanently bonded or welded? - Doug 14:51 3/27/2002 (6)
- Re: Why can't spacers be permanently bonded or wel - Randy Walters 09:11 3/29/2002 (1)
  - OK, and the weight to the opposite side - thanks. (nt) - Doug 15:16 4/01/2002 (0)
- To eliminate hassle, convert wheel bolts to studs - ///M 17:43 3/27/2002 (1)
  - I agree, that's a good idea either way. (m) - Doug 10:01 3/28/2002 (0)
- Balace at high speed... - HANDBLT 15:02 3/27/2002 (1)
  - I thought about that but..(m) - Doug 15:14 3/27/2002 (0)
2002 owner looking @ M3s - Frank 14:50 3/27/2002 (0)
OT: Build you own rice racer (url) - Kevin369 14:21 3/27/2002 (0)
Attn: ST LOUIS Mini-Meet NEW UPDATE (url) (nt) - VinnyMac 14:14 3/27/2002 (0)
Is there a way to tell what kind of cams I have? - Jeff J. 14:02 3/27/2002 (0)
Installing a new chip... Any tips? - Jeff J. 13:57 3/27/2002 (1)
- Re: Installing a new chip... Any tips? - Jonathan Selig 16:41 3/27/2002 (0)
bf goodrich g-force tires - Anthony 88 ///M3 11:32 3/27/2002 (2)
- Re: bf goodrich g-force tires - Robert Puertas 09:26 3/28/2002 (0)
- 5000 miles max on the race compound (nt) - michael 17:47 3/27/2002 (0)
EVO III Cabrio for sale!!!!!!!!!!!!!!!!!!!!!!!!!!! - HANDBLT 10:57 3/27/2002 (6)
- Re: EVO III Cabrio for sale!!!!!!!!!!!!!!!!!!!!!!! - lago 19:34 3/28/2002 (0)
- Re: EVO III Cabrio for sale!!!!!!!!!!!!!!!!!!!!!!! - Lance Richert 18:57 3/27/2002 (1)
  - Re: EVO III Cabrio for sale!!!!!!!!!!!!!!!!!!!!!!! - Bruce 21:42 3/27/2002 (0)
- 2500 mi limit is "show and display" only as I >> - Mr Turrets 13:23 3/27/2002 (0)
- They only made an std. M3 and an EVO II Cabrio. - Jim 12:37 3/27/2002 (0)
- Re: EVO III Cabrio for sale!!!!!!!!!!!!!!!!!!!!!!! - Krame 11:22 3/27/2002 (0)
Ignition wires - Serg 10:28 3/27/2002 (9)
- Stock set $125 from Maxmillians 1-800-950-2002 - Mr Turrets 12:32 3/27/2002 (0)
- Re: Ignition wires (pic) - MarkPike 12:32 3/27/2002 (4)
  - What kind of strut bar is that... - Gordon L 16:45 3/27/2002 (3)
    - Looks like a Hartge bar to me. - Barry Robinson 19:35 3/27/2002 (0)
    - www.bavauto.com $179.00 (nt) - MarkPike 17:16 3/27/2002 (1)
      - oops looks like they don't sell this one anymore - MarkPike 17:28 3/27/2002 (0)
- Re: Ignition wires (url) (nt) - HANDBLT 10:41 3/27/2002 (2)
  - Re: Ignition wires (pic) - HANDBLT 11:02 3/27/2002 (1)
    - Is that a JACOBs Ultra coil? - AlD 11:07 3/27/2002 (0)
Or: get BBS RC's , or BBS LM's - mel 10:11 3/27/2002 (14)
- Re: Or: get BBS RC's , or BBS LM's, WHERE? - pete b 13:20 3/27/2002 (8)
  - u can get 18"LM's - Mel 15:02 3/27/2002 (0)
  - now if i told u , I'd have to KILL u :) - mel 13:33 3/27/2002 (6)
    - Re: now if i told u , I'd have to KILL u :) - pete b 14:25 3/27/2002 (5)
      - LM's will be a problem now - Mel 14:28 3/27/2002 (4)
        
        Re: LM's will be a problem now - pete b 15:33 3/27/2002 (3)
        
        IF mel wont help ya, maybe i can.. - adam 15:59 3/27/2002 (1)
        
        Re: IF mel wont help ya, maybe i can.. - pete b 21:21 3/27/2002 (0)
        
        I can''t stand teh look of kosies - Mel 15:37 3/27/2002 (0)
- Get the Fikse's - Dave 11:16 3/27/2002 (4)
  - hmm true that is a nice wheel - mel 11:21 3/27/2002 (3)
    - Re: hmm true that is a nice wheel - Dave 12:45 3/27/2002 (2)
      - ooo sorry no - mel 13:02 3/27/2002 (1)
        
        thanks - Dave 13:33 3/27/2002 (0)
Question: BBS RS magnesium wheels - mel 10:07 3/27/2002 (5)
- dont you already have RSII's, are u crazy (nt) - Gary 88 Lachssilber 10:08 3/27/2002 (3)
  - Yes i already have RSII's, but I would like a - mel 10:12 3/27/2002 (2)
    - I meant crazy in the best possible way :-) - Gary 88 Lachssilber 10:13 3/27/2002 (1)
      - :) Oh I'm for sure crazy - mel 10:14 3/27/2002 (0)
- Re: Question: BBS RS magnesium wheels - Gary 88 Lachssilber 10:08 3/27/2002 (0)
Quick question to john///m3 and all - Gary 88 Lachssilber 10:02 3/27/2002 (4)
- get the rsII. u won't regret it! ................ - john///m3 00:09 3/28/2002 (0)
- Re: Quick question to john///m3 and all - pete b 12:29 3/27/2002 (0)
- Re: Quick question to john///m3 and all - Dave 11:14 3/27/2002 (0)
- RXII...(another option: RK's look pretty cool too) (nt) - Jeff E 10:08 3/27/2002 (0)
are all oil pan baffles created equal.... - C///MR 08:41 3/27/2002 (1)
- I have the add-on style from BMP Design........... - John A 13:07 3/27/2002 (0)
Best Book about e30 M3 and - Andrew Roane 08:36 3/27/2002 (7)
- Re: Best Book about e30 M3 and (url) - Kevin369 14:09 3/27/2002 (0)
- Re: Best Book about ///Motorsport (pic) - MarkPike 12:36 3/27/2002 (2)
  - Link (url) - MarkPike 12:36 3/27/2002 (1)
    - Yes! That book is outstanding!! - EricH 17:36 3/27/2002 (0)
- Re: Best Book about e30 M3 and - HANDBLT 09:40 3/27/2002 (0)
- repair or history? - C///MR 08:42 3/27/2002 (1)
  - Re: repair or history? - All of the Above - Roane 09:00 3/27/2002 (0)
Just a Electric Fan ? - Hugh-NJ 07:11 3/27/2002 (3)
- It's fine... - Mike 11:15 3/27/2002 (1)
  - What degree sensor? - Hugh-NJ 11:31 3/27/2002 (0)
- Re: Just a Electric Fan ? - Darren M 07:26 3/27/2002 (0)
e30 m3 cost? - jeff muzzin 03:43 3/27/2002 (0)
E30 M3 ENgine F/S - Baris NYC 00:43 3/27/2002 (0)
Trunk lid on a double lock position. - roger j 22:06 3/26/2002 (3)
- Re: Trunk lid on a double lock position. - zak 88 diamandzwart 08:25 3/27/2002 (0)
- Re: Trunk lid on a double lock position. - rs 23:47 3/26/2002 (1)
  - Re: Trunk lid on a double lock position. - roger j 05:11 3/30/2002 (0)
Trunk lid on a double lock position. (nt) - roger j 21:57 3/26/2002 (0)
OT: 7 SERIES RADIO : HELP! - pete b 21:36 3/26/2002 (2)
- Re: OT: 7 SERIES RADIO : HELP! - roger j 22:15 3/26/2002 (1)
  - Re: OT: 7 SERIES RADIO : HELP! - pete b 23:08 3/26/2002 (0)
Someone please explain............ - HANDBLT 21:31 3/26/2002 (1)
- Re: Someone please explain............ - pete b 21:38 3/26/2002 (0)
Someone please explain............ (nt) - HANDBLT 21:25 3/26/2002 (6)
- What????????????????? - Angus 21:33 3/26/2002 (5)
  - Go to the Restaurant at the End of the Universe - Zaphod Beeblebrox 17:38 3/27/2002 (0)
  - The answer is "42" - B. Wheaton 21:37 3/26/2002 (3)
    - I love Douglas Adams - Zach H 01:18 3/27/2002 (0)
    - Ah yes but what "is " the "?" Deep Thought - Angus 22:26 3/26/2002 (1)
      - E=MC^2 (nt) - Einstein 22:36 3/26/2002 (0)
Intake manifold gaskets @ $67.54 ea. - Phil 20:53 3/26/2002 (2)
- I hate to break the news, but..................... - John A 01:21 3/27/2002 (1)
  - How is their service they seem to have good prices - AC 17:10 3/27/2002 (0)
Anyone Interested in a Passenger Recaro - Nick 85 635csi 20:04 3/26/2002 (0)
will BBS fit?? - mteckboy 19:50 3/26/2002 (2)
- Yes Sir, 22mm offset (e34 5 series) (nt) - Gary 88 Lachssilber 20:00 3/26/2002 (1)
  - HI GARY :) (nt) - john///m3 22:48 3/26/2002 (0)
Neil E30 M3 For Sale - Jeff Deakin 18:18 3/26/2002 (1)
- Re: Neil E30 M3 For Sale (url) (pic) - Neil M 09:22 3/27/2002 (0)
Thanks for the advice, I have more questions pleas - Jeff Deakin 16:48 3/26/2002 (7)
- Re: Thanks for the advice, I have more questions p - gary 15:52 3/27/2002 (0)
- Re: Thanks for the advice, I have more questions p - Roops 04:13 3/27/2002 (0)
- Re: Thanks for the advice, I have more questions p - DarranP 17:01 3/26/2002 (4)
  - I drove in England once, on vacation.>>>> - EricH 17:38 3/26/2002 (3)
    - Re: I drove in England once, on vacation.>>& - Darren M 18:38 3/26/2002 (2)
      - Re: I drove in England once, on vacation.>>& - simon mac 06:45 3/27/2002 (1)
        
        Re: I drove in England once, on vacation.>>& - DarranP 11:22 3/27/2002 (0)
Exhaust Header leak - wjcarnes 15:20 3/26/2002 (2)
- Re: Exhaust Header leak - Stan 08:59 3/27/2002 (0)
- Re: Exhaust Header leak - MarkPike 16:06 3/26/2002 (0)
Front wheel bearing question - Dave 14:22 3/26/2002 (7)
- Get the 535 one from bimmerworld $84 ... - Jon 15:21 3/26/2002 (1)
  - Thanks everyone!!! (nt) - Dave 15:21 3/27/2002 (0)
- Sealed HUB go to thepartsbin.com $ 170-best price - Bing 15:06 3/26/2002 (4)
  - Re: Well yes sort of..... - eric_m3 18:21 3/26/2002 (2)
    - No E34`s until 1989. The hub is from an E28. - John A 20:43 3/26/2002 (1)
      - Re: I humbly stand corrected on this. (nt) - eric_m3 11:09 3/27/2002 (0)
  - whoa there tiger! :) - george 15:16 3/26/2002 (0)
Sachs Clutch Kit 4 sale - Glenn 14:22 3/26/2002 (3)
- Who has the best price on Sachs Heavy duty Clutch? - MG 22:47 3/26/2002 (1)
  - $292.61 from these guys........................... - John A 01:28 3/27/2002 (0)
- You paid tooo much for your clutch kit. I just - bought mine for 305 including shipping. 15:31 3/26/2002 (0)
Project cars wanted..e-mail me (nt) - ryan 13:42 3/26/2002 (0)
Suspension questions. - Dave Clark 12:43 3/26/2002 (4)
- Re: Vibration - michael 20:10 3/26/2002 (0)
- Re: Here are a couple of thoughts..... - eric_m3 18:33 3/26/2002 (2)
  - THANKS - dave clark 02:29 3/27/2002 (1)
    - Re: THANKS - eric_m3 11:12 3/27/2002 (0)
NC/GA/SC Meet, April 6th, BMW plant, SC (url) - ToddGT 12:39 3/26/2002 (0)
Oil Pan Baffle SURVEY Who has/hasn't??? - Rick Sams 11:40 3/26/2002 (11)
- Re: Yup - I got one (nt) - Roops 04:20 3/27/2002 (0)
- Every M3 should have one - Barry Robinson 21:42 3/26/2002 (0)
- If you EVER do long uphill right turns at ........ - John A 20:54 3/26/2002 (0)
- Re: One of those items that every E30 M3.... - eric_m3 18:36 3/26/2002 (0)
- More important for track but a good idea anyway - KevinS 17:11 3/26/2002 (0)
- Has. I love my bearings. (nt) - george 15:52 3/26/2002 (0)
- I drive on the street like it's the track. So yes (nt) - TRAVIS 12:41 3/26/2002 (1)
  - Re: Really Travis? - eric_m3 18:37 3/26/2002 (0)
- Re: Oil Pan Baffle SURVEY Who has/hasn't??? - Anthony 88 ///M3 12:25 3/26/2002 (0)
- I added turner's in place of stock. I think of it> (url) - .EricH 12:07 3/26/2002 (0)
- Re: Oil Pan Baffle SURVEY Who has/hasn't??? - Billy Ray 12:04 3/26/2002 (0)
chip - SteveS 11:35 3/26/2002 (1)
- Re: chip - Chuck 12:52 3/26/2002 (0)
Is there any bimmer event upcoming at the bay area (nt) - Daniel from Germany - 89 Cecotto 10:45 3/26/2002 (3)
- I have a schedule I can e-mail you. (pic) - B. Wheaton 15:12 3/26/2002 (2)
  - Re: schedule me2 please - Josh ///88 16:23 3/26/2002 (0)
  - Re: I have a schedule I can e-mail you. - Daniel from Germany - 89 Cecotto 16:14 3/26/2002 (0)
flywheel holding fixture - Rich 09:30 3/26/2002 (2)
- Re: flywheel holding fixture - jefrem 10:10 3/26/2002 (1)
  - or use a 36 mm socket on the crank pulley w/breake - Jon K 11:02 3/26/2002 (0)
San Diego BMW Club Autocross Sat Mar 30th (url) (pic) - Randy Walters 08:55 3/26/2002 (0)
this wing, what do you think, Yes or No? (pic) - m325ix/88m3 08:04 3/26/2002 (21)
- funniest thing I've ever seen on this board - zak 88 diamandzwart 08:32 3/27/2002 (0)
- YUK!!! can you spell JAP JAP JAP - Mike 06:49 3/27/2002 (0)
- Re: this wing, what do you think, Yes or No? - roger j 21:52 3/26/2002 (0)
- It's backwards! Please tell me that's photoshopped - Barry Robinson 21:45 3/26/2002 (1)
  - Re: It's backwards! Please tell me that's photosho - Roops 05:07 3/27/2002 (0)
- ricaroni (nt) - MichaelH 20:24 3/26/2002 (0)
- I think i'm gonna be sick!!! :< - Nick-NY 18:37 3/26/2002 (0)
- car is mint too, only 54k miles, i saw it Sunday (nt) - sn 14:00 3/26/2002 (0)
- Looks like it will slow you down real well!!! EOM - Ron ///Man 13:54 3/26/2002 (0)
- this a joke, right? (nt) - wjcarnes 12:58 3/26/2002 (0)
- HELL NO! (nt) - TRAVIS 12:44 3/26/2002 (0)
- NO, do u have to ask, there should be a law !! (nt) - sn 12:41 3/26/2002 (0)
- Re: this wing, what do you think, Yes or No? - gary 12:22 3/26/2002 (0)
- Great mod! Just add a VTEC sticker and youre done - Bill 12:08 3/26/2002 (0)
- doesn't even look mounted right! - .EricH 12:05 3/26/2002 (0)
- An otherwise very nice..... - Derin 11:44 3/26/2002 (0)
- Re: this wing, what do you think, Yes or No? - jefrem 10:00 3/26/2002 (0)
- Ha. Haha. Ha Ha. AAAHHHAHAHAHAHA! - Erik Brannfors - Seattle M3 09:33 3/26/2002 (0)
- No way, it ruins the car - Randy Walters 08:47 3/26/2002 (0)
- No (url) (pic) - Neil M 08:32 3/26/2002 (1)
  - Re: No - roger j 21:44 3/26/2002 (0)
Whats a good price????????? - Jeremy 07:48 3/26/2002 (2)
- too many variables..must know more - Paul Daniel 15:17 3/26/2002 (0)
- If you are not sure have it checked by a mechanic - Scott 325i 12:54 3/26/2002 (0)
Opted out of company car and having problems.... - Jonnie Boy 06:58 3/26/2002 (1)
- Re: Opted out of company car and having problems.. - DarranP 07:33 3/26/2002 (0)
WTB: Eibach Pro Kit Springs. - David L 04:32 3/26/2002 (0)
This is sweet!!! (pic) - Doug Huang 02:36 3/26/2002 (3)
- Re: Nurburgring!!!! I believe the 24 hrs race. (pic) - eric_m3 12:31 3/26/2002 (0)
- Yes, that is currently my wallpaper...... - Erik Brannfors - Seattle M3 09:34 3/26/2002 (1)
  - Sweeeeeeeeeeeeeeettttttttttttttttttttttttttttttt ! - MG 22:52 3/26/2002 (0)
What are the symptoms of a bad guibo? TIA. (nt) - MPower 01:42 3/26/2002 (3)
- Get under the car and look. Anything more than.... - John A 20:59 3/26/2002 (0)
- Re: What are the symptoms of a bad guibo? TIA. - mteckboy 19:48 3/26/2002 (0)
- "lurch"-ing at take off,a noticable lag or pause. - Doug 11:42 3/26/2002 (0)
Help with transmission - MPower 01:40 3/26/2002 (3)
- Thanks! (nt) - MPower 04:15 3/27/2002 (0)
- Re: Help with transmission - jefrem 10:03 3/26/2002 (0)
- Try Redline MTL instead of MT90? (nt) - JPL 09:31 3/26/2002 (0)
is this thing for real? (pic) - B. Wheaton 00:57 3/26/2002 (2)
- Who speaks enough German to tell us? (pic) - Scott 325i 09:41 3/26/2002 (1)
  - Re: Who speaks enough German to tell us? - Michael 17:36 3/26/2002 (0)
wheel size - Grizzly 00:10 3/26/2002 (2)
- Re: wheel size - Roops 05:11 3/26/2002 (0)
- Re: wheel size - Randy Walters 01:28 3/26/2002 (0)
question on painting valve cover & air plenum (pic) - john///m3 23:24 3/25/2002 (2)
- it takes a lot of time and patience to do it - Nick-NY 18:40 3/26/2002 (0)
- These are the color codes I've gathered: - Jeff E 08:09 3/26/2002 (0)
Another Carfax please? WBSAK0303KAE33332 - WOTjunkie 23:20 3/25/2002 (0)
UK Guys.......... - HANDBLT 23:18 3/25/2002 (3)
- Re: UK Guys.......... - Roops 05:31 3/26/2002 (0)
- Re: UK Guys.......... - Darren M 04:18 3/26/2002 (1)
  - Re: UK Guys.......... - Neil M 06:26 3/26/2002 (0)
how much do you think 88 hennarot e30 cost? - ibiza 22:38 3/25/2002 (0)
Looking for a set of wheels. Cause Im - Just a wheel wanting fool. 22:09 3/25/2002 (1)
- I have some OEM wheels for sale in Seattle.... - Alex 00:03 3/26/2002 (0)
Blaupunkt Toronto f/s on ebay - Angel'89M 21:21 3/25/2002 (0)
v8 install ? - chuck 20:54 3/25/2002 (2)
- Re: v8 install ? - Bob Heacox 21:58 3/30/2002 (0)
- Re: v8 install ? (url) - Ben Moore 20:59 3/25/2002 (0)
Rear wing question... - YA 20:44 3/25/2002 (2)
- If you need one.... - Charley 01:46 3/26/2002 (0)
- I paid $120. - John A 21:41 3/25/2002 (0)
M3 In Wyoming.......... - HANDBLT 18:47 3/25/2002 (3)
- Re: M3 In Wyoming.......... - Matt G 20:44 3/25/2002 (2)
  - Could you forward the phone number...? - Paul Daniel 15:20 3/26/2002 (0)
  - Did you get the whole going to church story? (nt) - HANDBLT 23:07 3/25/2002 (0)
I need a body/paint shop in Seattle (eastside) - PJ 17:55 3/25/2002 (3)
- Re: I need a body/paint shop in Seattle (eastside) - roger j 22:22 3/26/2002 (0)
- Re: I need a body/paint shop in Seattle (eastside) - Derek 00:21 3/26/2002 (0)
- 2 suggestions... - Keith in Seattle 18:08 3/25/2002 (0)
WTB e30 m3 front bumper, FS e36 M front bumper - Matt 17:00 3/25/2002 (0)
911SC vs E30 M3 - Pros and Cons - Andrew Roane 16:54 3/25/2002 (6)
- Re: I have been lucky enough to have driven both.. - eric_m3 07:56 3/26/2002 (0)
- Re: 911SC vs E30 M3 - I have both cars (pic) - m325ix/88m3 07:39 3/26/2002 (0)
- e30 m3 looks so much better than a SC - rich 17:25 3/25/2002 (0)
- I contemplated this - Josh ///88 17:22 3/25/2002 (0)
- don't know enough about P cars my self but(m) - .EricH 16:59 3/25/2002 (1)
  - Kind of depends what year 911. - Phil-OR 17:16 3/25/2002 (0)
Windscreen replacement in the UK - Darren M 16:21 3/25/2002 (7)
- Re: Windscreen replacement in the UK - Phil (UK) 11:41 3/26/2002 (0)
- See my post on the BEN board :) (url) (pic) (nt) - Neil M 06:28 3/26/2002 (0)
- Re: Windscreen replacement in the UK - Roops 05:16 3/26/2002 (0)
- Re: Windscreen replacement in the UK - DarranP 16:34 3/25/2002 (3)
  - Re: Windscreen replacement in the UK - Derin 17:15 3/25/2002 (2)
    - Re: Windscreen replacement in the UK - davebmw 12:29 3/26/2002 (0)
    - Re: Windscreen replacement in the UK - davebmw 12:26 3/26/2002 (0)
E30 Convertable Owners handbook - Bob Radford 14:15 3/25/2002 (0)
%8&%$#!@ Chain Tensioner Install????!!!!!???? - Bill 12:32 3/25/2002 (3)
- Re: Chain Tensioner Install????!!!!!? - MarkPike 14:23 3/25/2002 (0)
- Try it from underneath the car....you can actually - Jeff E 13:25 3/25/2002 (1)
  - Don`t disconnect the AC hoses, just unbolt the.... - John A 21:49 3/25/2002 (0)
eric_m3 -- if you are out there I have a question - no longer posting 11:58 3/25/2002 (0)
How Many Miles - Jeremy 11:36 3/25/2002 (1)
- nearly 200k but it all depends on how it was taken - care of. n/m scott 325i 11:39 3/25/2002 (0)
How Many Miles - Jeremy 11:36 3/25/2002 (0)
Need Information Please - bya02 11:33 3/25/2002 (0)
Mel is famous!!!!!! (url) - oldm3r 10:02 3/25/2002 (9)
- Friggin MORON - you trying to get us FIRED ??? - Randy Walters 15:18 3/25/2002 (2)
  - yep. I need a job (nt) - OldM3er 17:26 3/25/2002 (0)
  - That is why I said don't hit this link if you are - Scott 325i 16:26 3/25/2002 (0)
- It sure aint this MEL!!!!!!! - Mel 10:10 3/25/2002 (1)
  - He's talking about Mel Myers form the E36M3 board. (nt) - .EricH 16:59 3/25/2002 (0)
- Do not hit this link if you are at work!!! - scott 325i 10:06 3/25/2002 (2)
  - Phew thanks saved me just in time (url) (pic) - Neil M 11:06 3/25/2002 (0)
  - Sorry always forget that warning - oldm3r 10:08 3/25/2002 (0)
- Re: Mel is famous!!!!!! - oldm3r 10:02 3/25/2002 (0)
Anyone else...fusebox removal? Pls help! (url) - Jeff E. 09:07 3/25/2002 (0)
RITTER CAR STILL FOR SALE???????? (nt) - Mel 08:50 3/25/2002 (1)
- yes it is Mel nt - ritter 13:32 3/25/2002 (0)
Oil pump, STD vs.Sport Evolution - Marcus Larsson 08:33 3/25/2002 (3)
- Nope just the sproket size.......smaller....... - HANDBLT 23:11 3/25/2002 (0)
- Re: Oil pump, STD vs.Sport Evolution - Rhidian 15:36 3/25/2002 (0)
- Are you thinking of mix matching, if so...(m) - Doug 12:03 3/25/2002 (0)
M3 Convertible - Johnm 08:11 3/25/2002 (2)
- SOLD!!!!! If you import it for me.......? (nt) - HANDBLT 09:01 3/25/2002 (0)
- Re: M3 Convertible - Johnm 08:14 3/25/2002 (0)
why is that then? - Darren M 05:19 3/25/2002 (1)
- Re: why is that then? - Roops 05:38 3/25/2002 (0)
UK Meet - 6th April - Roops 05:07 3/25/2002 (2)
- Re: UK Meet - 6th April - simon mac 06:59 3/26/2002 (0)
- Any reason why ? (url) (pic) - Neil M 06:29 3/26/2002 (0)
UK Guys - Inspection II Costs & EvoII - Roops 04:10 3/25/2002 (8)
- Re: UK Guys - Inspection II Costs & EvoII - DarranP 05:06 3/25/2002 (7)
  - Re: UK Guys - Inspection II Costs & EvoII - Roops 05:45 3/25/2002 (6)
    - Re: UK Guys - Inspection II Costs & EvoII - Darren M 07:41 3/25/2002 (5)
      - Re: UK Guys - Inspection II Costs & EvoII - Roops 09:02 3/25/2002 (4)
        
        Re: UK Guys - Inspection II Costs & EvoII - simon mac 06:58 3/26/2002 (3)
        
        Re: UK Guys - Inspection II Costs & EvoII - Roops 09:52 3/26/2002 (0)
        
        Re: UK Guys - Inspection II Costs & EvoII - DarranP 07:36 3/26/2002 (1)
        
        Re: UK Guys - Inspection II Costs & EvoII - simon mac 19:04 3/27/2002 (0)
'91 325i Conv M Technic - Brian 01:57 3/25/2002 (0)
Nick - NY Valve Adjustement Kit - Bing 01:27 3/25/2002 (1)
- BMP Design - Nick-NY 07:46 3/25/2002 (0)
Speedo reads 5 mph fast, but trip cpu is right on. - Jake Beggy 00:39 3/25/2002 (1)
- That's normal.... - Randy Walters 01:25 3/25/2002 (0)
can I fit 235's up front on E34 throwing star rims (nt) - sev7488 00:05 3/25/2002 (0)

Questions, comments, or problems, please visit the Roadfly help desk.