bimmer.org forums: BMW E30 M3 Forum Archive, 2002 week 21

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E30 M3 Forum Archive, 2002 week 21
The bimmer.org E30 M3 Message Board exists to provide all BMW E46 M3 owners and enthusiasts an open forum to discuss this series of BMWs.

Search Archives

Help! Do I need to place sealant on both sides.... - Mark B. 23:58 6/02/2002 (5)
- I agree...if anything is used->Hylomar sparingly (nt) - Drew_Houston 16:57 6/03/2002 (0)
- Dinan recommends using sealant on all surfaces.... - John A 13:12 6/03/2002 (0)
- Permatex Hylomar (url) - michael 11:48 6/03/2002 (0)
- look here NT (url) - UweM3 05:13 6/03/2002 (0)
- Re: Help! Do I need to place sealant on both sides - Drew_Houston 00:26 6/03/2002 (0)
Anyone has 18" rims on E30 M3 ??? - Harry 23:48 6/02/2002 (16)
- Re: Anyone has 18" rims on E30 M3 ??? - Andrew 10:51 6/09/2002 (0)
- Trying to post pic of 18's again=P (url) (pic) - Highrever 01:55 6/04/2002 (1)
  - Re: Trying to post pic of 18's again=P - Harry 03:40 6/07/2002 (0)
- Trying to post pic of 18's again=P (pic) - Highrever 01:54 6/04/2002 (0)
- Re: Anyone has 18" rims on E30 M3 ??? (pic) - Highrever 15:25 6/03/2002 (0)
- Re: Anyone has 18" rims on E30 M3 ??? (pic) - Highrever 15:25 6/03/2002 (0)
- i have 235/35 18. u can run 225/35 18 (nt) - john///m3 12:34 6/03/2002 (7)
  - Re: i have 235/35 18. u can run 225/35 18 - Harry 14:27 6/03/2002 (2)
    - here's my set up harry.................. - john///m3 03:02 6/04/2002 (1)
      - Re: here's my set up harry.................. - Harry 11:38 6/04/2002 (0)
  - here's some pix.......... (url) (pic) - john///m3 12:47 6/03/2002 (3)
    - Nice Ride John :) (pic) - D///M3 22:05 6/03/2002 (2)
      - your car is just as good looking if not better!... - john///m3 03:17 6/04/2002 (1)
        
        Re: your car is just as good looking if not better - Harry 03:45 6/07/2002 (0)
- 225/40/18 is no prob if offset is correct (nt) - m325ix/88m3 10:19 6/03/2002 (1)
  - Re: 225/40/18 is no prob if offset is correct - Harry 12:16 6/03/2002 (0)
Warning Chime won't go off - Bill Morris 21:17 6/02/2002 (1)
- Re: Warning Chime won't go off - Jon90m3 04:12 6/03/2002 (0)
AC Service or conversion?? - John 20:35 6/02/2002 (0)
Distorted fuse box cover from heat??? - John 20:31 6/02/2002 (1)
- Check your relays. Unplug each one and............ - John A 22:49 6/02/2002 (0)
Grandpa with kids (pic) - Matt 17:55 6/02/2002 (4)
- Jeff J. has 3 - Bry 23:09 6/03/2002 (0)
- Is that anywhere near San Antonio Tx? id be dad - Adam Piotrowski 22:31 6/02/2002 (2)
  - Close to Houston (pic) - Matt 23:14 6/02/2002 (1)
    - Re: Close to Houston - Drew_Houston 00:14 6/03/2002 (0)
pics of UK meet NT (url) (nt) - UweM3 17:18 6/02/2002 (14)
- more pics of meet here! - m3geezer - simon mac 09:58 6/03/2002 (0)
- Re: pics of UK meet NT - Jon90m3 18:39 6/02/2002 (0)
- Re: pics of UK meet NT - BMG in the UK 18:02 6/02/2002 (2)
  - Re: pics of UK meet NT - m3geezer - simon mac 18:05 6/02/2002 (1)
    - Re: pics of UK meet NT - DarranP 05:23 6/03/2002 (0)
- Re: pics of UK meet NT (url) - Geoff 17:25 6/02/2002 (8)
  - Re: pics of UK meet NT - UweM3 17:37 6/02/2002 (0)
  - Re: pics of UK meet NT - m3geezer - simon mac 17:37 6/02/2002 (6)
    - Simon... - UweM3 17:41 6/02/2002 (5)
      - Re: Simon... - m3geezer - simon mac 17:43 6/02/2002 (4)
        
        Check now Simon. Thanks for the link nT - UweM3 17:51 6/02/2002 (3)
        
        thanks Uwe, my life is complete - m3geezer - simon mac 18:03 6/02/2002 (2)
        
        Complete?? All I have to say is EVO3............nT - UweM3 18:34 6/02/2002 (1)
        
        Re: Complete?? All I have to say is EVO3.......... - m3geezer - simon mac 09:56 6/03/2002 (0)
who inspect m3 in uk - Jeff Deakin 17:15 6/02/2002 (2)
- Re: who inspect m3 in uk - Paul 14:09 6/04/2002 (0)
- Re: who inspect m3 in uk - micky m3powered 12:43 6/03/2002 (0)
What type of sealant 4 oil pan gasket replacement? (nt) - Mark B. 17:04 6/02/2002 (1)
- Dont use any if you can help it and have a high qu - Drew_Houston 00:16 6/03/2002 (0)
how is 98 running m3geezer? nT (nt) - UweM3 16:09 6/02/2002 (0)
how is 98 running now M3geezer?nT (nt) - UweM3 16:03 6/02/2002 (4)
- Re: how is 98 running now M3geezer?nT - m3geezer - simon mac 17:40 6/02/2002 (3)
  - BOW DOWN TO MY SUPERIORITY!!!!!!!!!!!!!!!!!! - DarranP 05:24 6/03/2002 (2)
    - Re: BOW DOWN TO MY SUPERIORITY!!!!!!!!!!!!!!!!!! - m3geezer - simon mac 09:59 6/03/2002 (1)
      - Re: BOW DOWN TO MY SUPERIORITY!!!!!!!!!!!!!!!!!! - DarranP 11:29 6/03/2002 (0)
BMW CCA Club Race July 20/21 at MSR, Texas - ROBERT M 15:48 6/02/2002 (0)
replacing diff mount - Paul D 15:37 6/02/2002 (3)
- Replace cover with M coupe diff. cover. - JPL 10:14 6/03/2002 (0)
- take off... - scrv1 17:48 6/02/2002 (0)
- Re: replacing diff mount - m3geezer - simon mac 17:41 6/02/2002 (0)
Need help with diagnosis rain and engine failure (url) - daktari 11:24 6/02/2002 (4)
- Why are we the last resort? Check for water in... - michael 12:57 6/02/2002 (0)
- check for a water leak around the ecu. ive seen it - Adam Piotrowski 11:35 6/02/2002 (2)
  - I'm With Adam On This One Too --> (pic) - D///M3 12:11 6/02/2002 (1)
    - Re: I'm With Adam On This One Too --> - daktari 23:13 6/02/2002 (0)
Anyone have pics of M3 w/ Raceline RL-7 wheels? - Robert Puertas 11:05 6/02/2002 (1)
- Re: Anyone have pics of M3 w/ Raceline RL-7 wheels - DarranP 05:27 6/03/2002 (0)
Right rear wheel looks slightly toed? - Josh 88/// 10:42 6/02/2002 (1)
- Worn trailing arm bushings will cause this(nt) - John A 14:06 6/02/2002 (0)
aluminum control arms - rob 08:39 6/02/2002 (1)
- Bimmerworld has them for $159 each (nt) - John A 14:09 6/02/2002 (0)
Anyone interested in latest BMW parts CD (ETK/TIS) (pic) - DWS 03:13 6/02/2002 (0)
WTB: S14 engine block - Bob Stommel 01:16 6/02/2002 (5)
- Get a brand new 2.5 Evo 3 block. - Lee 07:27 6/02/2002 (4)
  - Maximamilion is arond $1400 - michael 13:00 6/02/2002 (0)
  - But With E3 Block, Aren't Oil Squirters Needed? (pic) - D///M3 11:28 6/02/2002 (2)
    - VW squrters will work (nt) - michael 13:01 6/02/2002 (0)
    - Re: But With E3 Block, Aren't Oil Squirters Needed - dhs 11:54 6/02/2002 (0)
Can someone with stock wheels do me a huge favor? - Dave 23:47 6/01/2002 (11)
- I have about 1/4" with 225x55x15 on stock rims... - michael 00:10 6/02/2002 (10)
  - Just to be clear... - Dave 00:44 6/02/2002 (1)
    - About 5/16 from rin 2 strut (nt) - michael 13:06 6/02/2002 (0)
  - whoops (nt) - michael 00:19 6/02/2002 (1)
    - What is it that you run? (nt) - EricH 17:15 6/03/2002 (0)
  - Oops! (nt) - michael 00:18 6/02/2002 (0)
  - P.S. I run Dunlop Sp8000 (nt) - michael 00:17 6/02/2002 (0)
  - P.S. I run Dunlop Sp8000 (nt) - michael 00:17 6/02/2002 (0)
  - P.S. I run Dunlop Sp8000 (nt) - michael 00:17 6/02/2002 (0)
  - P.S. I run Dunlop Sp8000 (nt) - michael 00:15 6/02/2002 (0)
  - P.S. I run Dunlop Sp8000 (nt) - michael 00:15 6/02/2002 (0)
What is steering ratio for US M3 - lock to lock ? (nt) - smithers 22:54 6/01/2002 (1)
- 19.6 to 1....don`t know the # of turns, but....... - John A 00:00 6/02/2002 (0)
Any ideas on what could be wrong? (url) (pic) - Dave 22:13 6/01/2002 (4)
- Re: Any ideas on what could be wrong? (pic) - Angus 23:18 6/01/2002 (0)
- Sorry to say, it be bent... - michael 23:14 6/01/2002 (2)
  - Re: Sorry to say, it be bent... (pic) - Dave 23:45 6/01/2002 (1)
    - If you "bend it back"... - michael 00:07 6/02/2002 (0)
E30 M3 Parts For Sale - Mike 21:15 6/01/2002 (0)
need help poor ruuning - grizzly 20:04 6/01/2002 (4)
- Re: need help poor ruuning (url) - Mark D'Sylva 00:26 6/02/2002 (0)
- Re: need help poor ruuning - C///MR 22:42 6/01/2002 (2)
  - Re: need help poor ruuning - grizzly 22:45 6/01/2002 (1)
    - Re: need help poor ruuning - C///MR 22:58 6/01/2002 (0)
e30 m3 stock wheels for sale (url) - MichaelH 17:07 6/01/2002 (0)
Parting out 89 325is and 90 325ix, email needs - Craig Day 15:44 6/01/2002 (2)
- both are 5 sp. with low miles - Craig Day 15:46 6/01/2002 (1)
  - Sorry, I got lost, wrong board!! - Craig Day 01:51 6/02/2002 (0)
check this out... (url) (nt) - scrv1 15:36 6/01/2002 (1)
- I saw that car up close... - ROB89M3 18:39 6/01/2002 (0)
Bimmergate II Picnic / Meet tomorrow........ - Bryan in DE 15:13 6/01/2002 (0)
Carfax please - Ryan M 14:20 6/01/2002 (2)
- Re: Carfax please - Ziggysnorkel 18:28 6/01/2002 (1)
  - Thank you! - Ryan M 00:35 6/02/2002 (0)
Can i use this shifter with the Dogleg trans.? (pic) - Jaeson 14:04 6/01/2002 (5)
- BMW shifters don`t care what the pattern is...(m) - John A 18:45 6/01/2002 (2)
  - Where can I find an insert? (nt) - Jaeson 19:53 6/01/2002 (1)
    - From the dealer (nt) - michael 00:12 6/02/2002 (0)
- picture (pic) - Jaeson 14:06 6/01/2002 (1)
  - ok this is the real picture (pic) - Jaeson 14:06 6/01/2002 (0)
Black Soot on rear bumper = bad AFM????? - Erik Brannfors - Seattle M3 12:02 6/01/2002 (9)
- Re: Erik you are on the right track.....Roops - eric_m3 11:19 6/04/2002 (0)
- Re: Erik you are on the right track.....Roops - eric_m3 11:18 6/04/2002 (0)
- Re: Black Soot on rear bumper = bad AFM????? - Roops 19:33 6/01/2002 (0)
- It means the car is running rich = Perf. Chip - ROB89M3 18:34 6/01/2002 (1)
  - Re: That is incorrect.......... - eric_m3 11:11 6/04/2002 (0)
- More likely cause than a bad AFM is a bad CTS (m) - John A 18:22 6/01/2002 (0)
- Could also be a bad O2 sensor.... - B. Wheaton 18:09 6/01/2002 (0)
- i also get the black soot... - scrv1 13:36 6/01/2002 (0)
- Re: Black Soot on rear bumper = bad AFM????? - tolofou 12:44 6/01/2002 (0)
Cheapest place to buy intake gaskets? - ///MBaller 11:16 6/01/2002 (4)
- Also check the idle valve hoses for cracks (m) - John A 18:31 6/01/2002 (0)
- Try International Auto Parts (url) - Phil 12:22 6/01/2002 (0)
- Dinan markets "improved" ones. Check them out. (nt) - SteveS 11:41 6/01/2002 (1)
  - The Dinan gaskets don`t replace the rubber M3..... - John A 18:35 6/01/2002 (0)
M50: '95M3 or '99M3??? - Ty from E30 board 08:17 6/01/2002 (1)
- $hit wrong board! - Ty from E30 board 08:18 6/01/2002 (0)
Schroth install - Phil-OR 20:43 5/31/2002 (3)
- Re: Schroth install - Jeffs 13:18 6/01/2002 (1)
  - Re: Schroth install - Phil-OR 16:17 6/03/2002 (0)
- Re: Schroth install - Ziggysnorkel 20:55 5/31/2002 (0)
Do '89s have standard ABS? (nt) - ROBERT M 18:55 5/31/2002 (1)
- All M3`s have ABS, including 88`s. (nt) - John A 19:45 5/31/2002 (0)
anyone have pics of an e30 M3 with a e36 motor ? - Lee22 18:19 5/31/2002 (5)
- Here a Euro spec(nt) (url) - Kareem 07:05 6/01/2002 (0)
- I'm not a hater (pic) - Nicholas 23:04 5/31/2002 (0)
- plenty of pics on E30M3TheRealM3.com (nt) - Allan Barbour 18:32 5/31/2002 (2)
  - hmm....odd site for that mod considering the name - Nicholas 19:09 5/31/2002 (1)
    - Trust Me, It's NOT An Odd Site--- (OEM) - D///M3 18:05 6/02/2002 (0)
m50 conv ac?///hello chris!! - chuck waits 17:49 5/31/2002 (3)
- can u say torque? thats why - chuck waits 13:40 6/03/2002 (0)
- sorry, 525 not 325, but still, why? - michael 00:14 6/02/2002 (0)
- You put a 325 motor in? Why bother? (nt) - michael 23:49 6/01/2002 (0)
Dallas,TX meet tomorrow at Autoscope - Franklin 16:35 5/31/2002 (0)
*ATTENTION* Atlanta area meet>>> - Cosmos///M3 15:01 5/31/2002 (0)
NGK guys!! please help, what socket do you use?? - sev7488 12:51 5/31/2002 (2)
- This is what I`ve seen mentioned on the SIG....... - John A 00:01 6/01/2002 (1)
  - thanks, I just turned my own, works ok. - sev7488 10:36 6/03/2002 (0)
WTB:17X8 BBS CROSS SPOKE 2 PC - Edwin 10:51 5/31/2002 (12)
- Re: WTB:17X8 BBS CROSS SPOKE 2 PC (pic) - Jerry 11:36 5/31/2002 (11)
  - I've had em - Damian-88/91M3 05:05 6/01/2002 (0)
  - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - Edwin 15:03 5/31/2002 (0)
  - Experience with these wheels? - zhadley 12:11 5/31/2002 (1)
    - wuzzup zak. it's john///m3. how's the car?...... - john///m3 19:32 5/31/2002 (0)
  - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - zhadley 12:10 5/31/2002 (0)
  - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - Jerry 11:38 5/31/2002 (5)
    - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - Edwin 14:59 5/31/2002 (0)
    - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - Edwin 14:59 5/31/2002 (0)
    - Re: WTB:17X8 BBS CROSS SPOKE 2 PC - Edwin 14:55 5/31/2002 (2)
      - EDWIN PRESS SUMBIT ONCE! THEN WAIT!!!!! - Magnus! 16:01 5/31/2002 (1)
        
        Re: EDWIN PRESS SUMBIT ONCE! THEN WAIT!!!!! - EDWIN 22:17 5/31/2002 (0)
rising rate fuel pressure regulator? (url) - canada matt 09:37 5/31/2002 (1)
- I'd like to know the same - Josh 88 /// 16:45 5/31/2002 (0)
New BMW shirt !!!!!! - Nick-NY 08:08 5/31/2002 (5)
- Your idea or theirs I wonder - Geoff 01:20 6/01/2002 (0)
- http://www.bmw-pitshop.com/index.jsp - Nick-NY 01:15 6/01/2002 (0)
- Re: New BMW shirt !!!!!! - Eric 00:29 6/01/2002 (0)
- I VONT VUN - mel 13:16 5/31/2002 (0)
- That is outstanding! (nt) - EricH 12:06 5/31/2002 (0)
Washington D.C. E30 M3 Gathering (url) - Brandon Wood 07:51 5/31/2002 (0)
Information Please - REG Z8 01 06:31 5/31/2002 (4)
- Did Dad forget to lock up his keyboard again? - Gee 00:50 6/01/2002 (0)
- You might want to check the e46 m3 board (nt) - ADA///M 13:24 5/31/2002 (0)
- It's FABULOUS!!!! - Jim 13:04 5/31/2002 (0)
- Re: Information Please - Bruce 07:24 5/31/2002 (0)
//m emblems wanted - eurospec1 04:51 5/31/2002 (4)
- I hope these are for an M3 and not a poser mobile! - B. Wheaton 03:40 6/01/2002 (0)
- have 1 carbon fiber ///m hood emblem for sale..... - john///m3 19:37 5/31/2002 (0)
- $20k for mine,... (no assembly required) - Josh 88/// 11:48 5/31/2002 (0)
- All can be found on ebay, most suppliers too. - EricH 11:18 5/31/2002 (0)
FS: Black leather door panels - Clarke 02:22 5/31/2002 (1)
- ME ME ME ME Please email me (nt) - Gary 88 Lachssilber 09:24 5/31/2002 (0)
Shifter heating problem??? - DINO///M3 00:35 5/31/2002 (2)
- Re: Shifter heating problem??? - C///MR 01:50 5/31/2002 (1)
  - Thanks Chris... - DINO///M3 21:27 5/31/2002 (0)
Need some parts - Matt 00:20 5/31/2002 (1)
- I have a Borla for you. email me: - Jose Perez 21:08 5/31/2002 (0)
FS: Eiback Springs - M3RNO1 23:49 5/30/2002 (0)
Piss Poor Dyno Results (url) (nt) - HANDBLT 21:05 5/30/2002 (8)
- Get rid of the cam gear - Franklin Joseph 12:04 5/31/2002 (0)
- Re: Piss Poor Dyno Results - Franklin Joseph 11:59 5/31/2002 (0)
- Seems right on track to me too>>>> (url) - EricH 11:24 5/31/2002 (2)
  - You dont have a MAF tho (nt) - ADA///M 13:27 5/31/2002 (1)
    - true. Are they any good? (nt) - EricH 17:10 5/31/2002 (0)
- Seems about right... - stevetall 02:20 5/31/2002 (0)
- Re: Piss Poor Dyno Results - Adam Piotrowski 22:20 5/30/2002 (1)
  - Re: What do you mean not listen to you? - HANDBLT 23:15 5/30/2002 (0)
Knowledgable M mechanic in Baltimore, MD?? - DC 20:03 5/30/2002 (1)
- Try these guys... - Paul (at Maximill...) 12:25 5/31/2002 (0)
Anyone here with a M# and from Montreal? (nt) - Mike 18:44 5/30/2002 (2)
- Re: Anyone here with a M3 and from Montreal? - Mike 18:44 5/30/2002 (1)
  - There will be 14 e30 M3s at Bimmernight (url) - Lee 19:36 5/31/2002 (0)
WTB M3 in Quebec - Mike 18:43 5/30/2002 (0)
"INSPECTION" light question - Phillip 18:22 5/30/2002 (2)
- Re: "INSPECTION" light question - ///MinWei 08:59 5/31/2002 (0)
- Re: "INSPECTION" light question (url) - edro 18:38 5/30/2002 (0)
shipping front bumper cover.... - B. Wheaton 15:13 5/30/2002 (1)
- nevermind - it's classified as oversized and .... - B. Wheaton 15:38 5/30/2002 (0)
Here's Mel's 14 Karat Calipers. (pic) - Magnus! 13:49 5/30/2002 (12)
- wuzzup mel. just wanted to say hi! (nt) - john///m3 23:38 5/30/2002 (1)
  - Re: wuzzup John.... does it look slam dunking - Mel 08:47 5/31/2002 (0)
- MUCHO THANKS MAGNUS!!!!!!!!!!!!!!!!!!!!! (pic) - Mel 14:11 5/30/2002 (9)
  - **TYTE** Looking Rims Melvin :>) {n/t} (pic) - D///M3 22:53 5/30/2002 (0)
  - no problem. They'll be up for a month. (nt) - Magnus! 19:45 5/30/2002 (0)
  - Looks pretty good, but why? - Dave 14:50 5/30/2002 (6)
    - heres why - Mel 14:56 5/30/2002 (5)
      - that gold from factory is actually cadmium plating - B. Wheaton 21:36 5/30/2002 (2)
        
        you've named your M "Wheezy"? - C///MR 02:03 5/31/2002 (1)
        
        Re: you've named your M "Wheezy"? - B. Wheaton 02:57 5/31/2002 (0)
      - That looks very good. They match the color of the - Michael Abrahams 18:47 5/30/2002 (1)
        
        thanks means alot :) - Mel 08:46 5/31/2002 (0)
WTB: passenger fender - scrv1 11:55 5/30/2002 (0)
Gearbox - 2 or 3 peice? - tom 10:55 5/30/2002 (2)
- Check call Carl Nelson at lajolla. - RANDYM3/M5 07:13 5/31/2002 (0)
- 3 pieces...... - RANDYM3/M5 07:11 5/31/2002 (0)
anyone want to post for me my 14K calipers :) (nt) - Mel 09:11 5/30/2002 (5)
- Is this a joke(i hope so)....I dont get it anyway - ADA///M 13:49 5/30/2002 (1)
  - kind of . unless u want to take them to a jewler - Mel 14:13 5/30/2002 (0)
- 14 Karat or $14,000?? - B. Wheaton 13:31 5/30/2002 (1)
  - sorry 14 karat :) - Mel 13:48 5/30/2002 (0)
- Re: anyone want to post for me my 14K calipers :) - Magnus! 11:38 5/30/2002 (0)
oil light on bottom right of dash..... - dee 08:56 5/30/2002 (1)
- Re: oil light on bottom right of dash..... - David 87M3 09:40 5/30/2002 (0)
Black Recaro SRD's for sale... - ///MBaller 23:36 5/29/2002 (0)
M3 part wanted..... - John Gilson 22:25 5/29/2002 (0)
FS: Borla SS Exhaust - ///MBaller 22:07 5/29/2002 (1)
- Re: FS: Borla SS Exhaust - dee 08:50 5/30/2002 (0)
engine quit - grizzly 21:04 5/29/2002 (4)
- Re: engine quit - Chris W. 19:54 5/30/2002 (0)
- this sounds like it - Damian-88/91M3 23:08 5/29/2002 (1)
  - Check the intake hose....to the plenum... - ROB89M 23:38 5/29/2002 (0)
- Re: engine quit - Pat Chiang 21:27 5/29/2002 (0)
Difference between Evo III fender and stock - edro 20:49 5/29/2002 (2)
- Requires large tires/wheels to look right - ///M 18:54 5/30/2002 (0)
- two things: - Damian-88/91M3 23:13 5/29/2002 (0)
Used A/C compressor prices? - Alvin C. 19:39 5/29/2002 (1)
- I have one, but I am usure if it works, $40 for ya - Adam Piotrowski 19:44 5/29/2002 (0)
Packaging wheels for shipping - Jack S. 18:57 5/29/2002 (6)
- Ive shipped about 4 sets of rims this year.... - ADA///M 13:52 5/30/2002 (0)
- 2 pcs. of cardboard cut to size + packing tape... - MG 21:49 5/29/2002 (1)
  - I had one OZ 3 piece wheel cracked by using....... - John A 23:57 5/29/2002 (0)
- i cut a piece of foam rubber in the shape of.... - Nick-NY 21:43 5/29/2002 (0)
- Re: Packaging wheels for shipping - B. Wheaton 21:05 5/29/2002 (1)
  - call a wheel shop and see if they have any boxes - B. Wheaton 21:06 5/29/2002 (0)
Need advice on shock/springs replacement - roel 18:49 5/29/2002 (2)
- Re: Need advice on shock/springs replacement - C///MR 10:20 5/30/2002 (0)
- Re: Need advice on shock/springs replacement - Mark B. 18:58 5/29/2002 (0)
NE one interested in group purchase 4 GC?......... - Mark B. 18:45 5/29/2002 (4)
- I might too...need more details...chk email(nt) - Charley 20:03 5/29/2002 (0)
- Re: NE one interested in group purchase 4 GC?..... - Highrever 19:35 5/29/2002 (0)
- i might be ,need to know whats included though? - Angus 19:28 5/29/2002 (1)
  - spring coilover....same set on GC web site - Mark B. 20:39 5/29/2002 (0)
Correct engine oil? HELP - Cybertronic 17:44 5/29/2002 (6)
- Here's A Great Combo! - Dave 21:05 5/30/2002 (0)
- Mobile 15/50 - Damian-88/91M3 23:15 5/29/2002 (0)
- I use AMSOIL 20w50 and have regular analysis done (url) - B. Wheaton 21:55 5/29/2002 (1)
  - Re: Smart man! (nt) - eric_m3 12:57 6/05/2002 (0)
- Re: Correct engine oil? HELP - Highrever 18:21 5/29/2002 (1)
  - Re: Correct engine oil? HELP - Highrever 18:25 5/29/2002 (0)
Slotted or X-drilled? best rotor for the E-30 M3.. - Highrever 17:10 5/29/2002 (6)
- Re: Slotted or X-drilled? best rotor for the E-30 - Dave 00:12 5/31/2002 (0)
- Stock is NLA, Evo/Motorsport rotors are standard>> - EricH 10:28 5/30/2002 (0)
- I went with gas slotted all around when.... - ptdaniel 10:26 5/30/2002 (0)
- Re: Slotted or X-drilled? best rotor for the E-30 - Rob Workman 09:16 5/30/2002 (0)
- Call eurasian 1800 624 -6614 cheaper than bavauto - RandyM3/M5 22:08 5/29/2002 (0)
- you can get either at bavauto.com - B. Wheaton 21:14 5/29/2002 (0)
Can you put a car seat in an M3 Convertible - JohnS 16:32 5/29/2002 (1)
- Not in the US (ha ha ) - ptdaniel 10:30 5/30/2002 (0)
Wheels/Tires? - Bob Heacox 16:26 5/29/2002 (1)
- Re: Wheels/Tires? - edro 18:06 5/29/2002 (0)
interior leak - Manford 15:42 5/29/2002 (2)
- I KNOW I KNOW...pick me..pick me... - ADA///M 15:55 5/29/2002 (1)
  - Re: I KNOW I KNOW...pick me..pick me... - Manford 18:56 5/29/2002 (0)
:.AMS Poster Bid.: (pic) - Michael Abrahams 15:23 5/29/2002 (0)
FS:Carbon fibre EVO3 rearwing........... - Markus 13:56 5/29/2002 (0)
Where can I purchase a Scorpion Exhaust? (nt) - Mark B. 12:29 5/29/2002 (2)
- Interested in group purchase?? email me - Barry Robinson 17:13 5/29/2002 (1)
  - I've tried, but didn't get a response. - Mark B. 18:12 5/29/2002 (0)
My wife bought me this model today (url) (pic) (nt) - Anthony 88 M3 12:16 5/29/2002 (7)
- Re: My wife bought me this model today - Joe 15:57 5/29/2002 (0)
- What a woman...is she married? (nt) - Jim 14:56 5/29/2002 (0)
- YOU ARE LUCKY!!! - ROB89M3 13:18 5/29/2002 (0)
- Do you need more proof that she loves you?!?! (nt) - KevinS 13:13 5/29/2002 (0)
- Re: My wife bought me this model today - ///MinWei 12:56 5/29/2002 (0)
- Pleeease sell it to me,I beg you!!!!!! - rich 12:52 5/29/2002 (1)
  - uhh, the model or the....? - EricH 16:33 5/29/2002 (0)
My wife bought me this model today (pic) (nt) - Anthony 88 M3 12:16 5/29/2002 (0)
E30 M3 Parts Wanted - Ralph Warren 11:56 5/29/2002 (1)
- Re: E30 M3 Parts Wanted - Highrever 17:35 5/29/2002 (0)
Strange engine noise.Redux - wjcarnes 11:41 5/29/2002 (8)
- Do a visual inspection with it running - ROB89M3 13:22 5/29/2002 (1)
  - Re: Do a visual inspection with it running - wjcarnes 13:45 5/29/2002 (0)
- Re: Is it a "clattering" noise???..more-> - ROB89M3 11:52 5/29/2002 (5)
  - Re: Is it a "clattering" noise???..more-> - wjcarnes 12:32 5/29/2002 (4)
    - I'd suggest you try replacing the tensioner if - Jeff E. 13:08 5/29/2002 (3)
      - Re: I'd suggest you try replacing the tensioner if - wjcarnes 13:37 5/29/2002 (0)
      - Re: I'd suggest you try replacing the tensioner if - wjcarnes 13:31 5/29/2002 (1)
        
        Re: I'd suggest you try replacing the tensioner if - Jon90m3 15:35 5/29/2002 (0)
Strange engine noise. (nt) - wjcarnes 11:21 5/29/2002 (0)
Check out the M3 in action - 88__MMM 10:52 5/29/2002 (2)
- How much HP do those stickers add??? - ADA///M 11:29 5/29/2002 (1)
  - Re: How much HP do those stickers add??? - 88__MMM 12:10 5/29/2002 (0)
Check out the ultimate lap of Monaco... (url) - Ash 10:07 5/29/2002 (1)
- Re: Check out the ultimate lap of Monaco... (url) - sorry, try this 10:10 5/29/2002 (0)
WOW! Here is Gumball 3000 video. Mischief 3000 (url) - Magnus! 10:07 5/29/2002 (3)
- awesome!!!!! New SL Doughuts!!!! - Nick-NY 21:54 5/29/2002 (0)
- running at 130! BALLS... - Adam Piotrowski 17:29 5/29/2002 (1)
  - Re: running at 130! BALLS... - m3 geezer - simon mac 04:51 5/30/2002 (0)
anyone familiar with an "L6"?? - scrv1 23:34 5/28/2002 (3)
- It has a beer cooler for the rear passengers! (nt) - michael 09:38 5/29/2002 (0)
- my roommate has an 86 L7.... - derek e30 325is 08:39 5/29/2002 (0)
- Yep, my father has one. - George 23:41 5/28/2002 (0)
WTB: passenger fender.. - scrv1 23:31 5/28/2002 (0)
HELP!! HELP!! Car Won't Start!! - Euro_323i 21:55 5/28/2002 (2)
- Does the starter turn? - David 87M3 05:39 5/29/2002 (1)
  - Re: Does the starter turn? - Euro_323i 16:08 5/29/2002 (0)
e30 m3 wallpaper sized pics? anyone? (nt) - rob 21:43 5/28/2002 (3)
- I have a lot of pics on my website (url) - Bry 16:31 5/29/2002 (0)
- www.qubic.net/~adamp - Adam Piotrowski 22:39 5/28/2002 (1)
  - Hundreds @ www.E30M3TheRealM3.com :) (n/t) - D///M3 22:50 5/28/2002 (0)
Anyone know when U.S. SIGFEST East is? (nt) - Magnus 21:39 5/28/2002 (2)
- From what I've heard..... - Chris F. 18:38 5/29/2002 (0)
- i'd like to know as well - Nick-NY 23:20 5/28/2002 (0)
Trunk mounted battery - Al 19:18 5/28/2002 (0)
Where is a good place to look for E30M3 4sale? - Robert M 19:03 5/28/2002 (2)
- try BMW CCA's Roundel magazine. - Nick-NY 23:21 5/28/2002 (1)
  - Re: try BMW CCA's Roundel magazine. - Robert M 13:59 5/29/2002 (0)
Rubber suspension mounts UK (1989 m3 e30 cab) - Fred 18:44 5/28/2002 (2)
- Re: Rubber suspension mounts UK (1989 m3 e30 cab) - Uwe 04:57 5/29/2002 (1)
  - Re: Rubber suspension mounts UK (1989 m3 e30 cab) - Dan M. 00:46 5/30/2002 (0)
Red E30 M3 on Mission in Santa Cruz...are you here - ///Merendino 18:36 5/28/2002 (0)
For Sale: Stock 15" wheels - mib911 17:42 5/28/2002 (2)
- Re: For Sale: Stock 15" wheels - tom G 23:57 5/28/2002 (1)
  - Re: For Sale: Stock 15" wheels - Tom McLaughlin 16:46 6/01/2002 (0)
UUC Short shift install instructions? - Cybertronic 17:20 5/28/2002 (2)
- There's a .pdf download on their site. - EricH 13:23 5/29/2002 (0)
- Re: UUC Short shift install instructions? - Magnus! 23:12 5/28/2002 (0)
Oil temp not higher than 75 degree Cels. - Sonny, Sweden 16:41 5/28/2002 (6)
- Re: Oil temp not higher than 75 degree Cels. - Geoff 17:15 5/28/2002 (5)
  - Re: Oil temp not higher than 75 degree Cels. - David 87M3 05:00 5/29/2002 (2)
    - Re: Oil temp not higher than 75 degree Cels. - Sonny, Sweden 09:38 5/29/2002 (1)
      - Re: Oil temp not higher than 75 degree Cels. - Dan M. 00:50 5/30/2002 (0)
  - Re: Oil temp not higher than 75 degree Cels. - m3 geezer - simon mac 04:15 5/29/2002 (0)
  - Re: Oil temp not higher than 75 degree Cels. - Sonny, Sweden 00:42 5/29/2002 (0)
Carfax Needed - Brian 16:37 5/28/2002 (0)
Carfax Needed - Brian 16:35 5/28/2002 (2)
- Re: Carfax Needed - ziggysnorkel 23:34 5/28/2002 (1)
  - THANKS (nt) - Brian 08:20 5/29/2002 (0)
Knowlegable M mechanic in San Diego? - DC 16:25 5/28/2002 (4)
- Re: Knowlegable M mechanic in San Diego? - apex 23:11 5/28/2002 (0)
- Re: Knowlegable M mechanic in San Diego? - Jimmy 18:55 5/28/2002 (2)
  - I concur. La Jolla Independent. (nt) - JPL 09:43 5/29/2002 (0)
  - Re: Knowlegable M mechanic in San Diego? - DC 20:24 5/28/2002 (0)
E30 M3 newbie - M35power 16:24 5/28/2002 (1)
- Yeah, it's a bug you catch...... - Magnus 21:44 5/28/2002 (0)
Oil Pan Baffle- All the same? - CJ 15:46 5/28/2002 (2)
- Re: Oil Pan Baffle- All the same? - Barry Robinson 19:21 5/28/2002 (1)
  - Re: Oil Pan Baffle- All the same? - CJ 22:04 5/28/2002 (0)
what is the sensor/switch on the back of the - al 14:49 5/28/2002 (1)
- shuts off the a/c when engine gets too hot. (nt) - Doug 15:21 5/28/2002 (0)
trip computer light (nt) - Jeff 14:21 5/28/2002 (3)
- sorry - Jeff 14:22 5/28/2002 (2)
  - Replacement Instructions - John A 22:42 5/28/2002 (1)
    - Re: Replacement Instructions - Paul 22:59 5/28/2002 (0)
Wiring diagram of the AC compressor...... - HANDBLT 14:16 5/28/2002 (0)
what's this I heard abt the e46 m3 blowing up? - Josh 88/// 11:26 5/28/2002 (3)
- Here's the explanation.... - Cybertronic 17:22 5/28/2002 (0)
- alot so far has blown up due to overreving... - rich 12:08 5/28/2002 (1)
  - Rev limiters don't prevent missed shifts. - SALD 19:47 5/28/2002 (0)
South UK Meeting 2nd june - m3geezer 10:22 5/28/2002 (9)
- Re: South UK Meeting 2nd june - m3 geezer - simon mac 04:22 5/29/2002 (0)
- Re: South UK Meeting 2nd june - Geoff 17:13 5/28/2002 (1)
  - Re: South UK Meeting 2nd june - m3 geezer - simon mac 04:17 5/29/2002 (0)
- Re: South UK Meeting 2nd june - Jeff Deakin 15:37 5/28/2002 (1)
  - Re: South UK Meeting 2nd june - DarranP 16:58 5/28/2002 (0)
- yeah i'll go - BMG in the UK 13:45 5/28/2002 (3)
  - me too. nT - Uwe 05:03 5/29/2002 (2)
    - Re: me too. nT - m3 geezer - simon mac 06:47 5/29/2002 (1)
      - yuup! received NT - Uwe 08:07 5/29/2002 (0)
wiring harness help - Ian 08:52 5/28/2002 (1)
- You'll want an Electrical Troubleshooting Manual - X Mon 23:55 5/28/2002 (0)
WBSAK0308LAE34171 (nt) - carfax 07:39 5/28/2002 (7)
- Re: WBSAK0308LAE34171 - ziggysnorkel 08:23 5/28/2002 (6)
  - Thanks, but why the mileg don't show up when reg'd - carfax 10:04 5/28/2002 (5)
    - They stop counting mileage after around 10yrs. (nt) - Magnus! 13:15 5/28/2002 (4)
      - MAGNUS-It showed up on my CARFAX that I ran.... - SALD 20:05 5/28/2002 (2)
        
        Sorry abot the CAPS Magnus! Sticky fingers...(nt) - SALD 20:07 5/28/2002 (1)
        
        Sorry, it also depends on State you live in.....mo - Magnus 21:53 5/28/2002 (0)
      - Thank you! - carfax 14:22 5/28/2002 (0)
Keys locked in car with engine running!! - Barry Robinson 02:53 5/28/2002 (4)
- Re: Keys locked in car with engine running!! - davebmw 14:08 5/29/2002 (0)
- Re: Keys locked in car with engine running!! - davebmw 04:08 5/28/2002 (2)
  - Just got it open without any damage...thanks (eom) - Barry Robinson 06:05 5/28/2002 (1)
    - Re: How did you open it? - M3andM3 01:53 5/30/2002 (0)
Mounts - Hooman89M3 02:21 5/28/2002 (0)
Need help - BD 01:43 5/28/2002 (1)
- Fuse # 21 - John A 13:27 5/28/2002 (0)
Questions about rebuilding an S14 motor. - Andrew 01:24 5/28/2002 (4)
- I had my lower end re-done recently... - stevetall 02:17 5/28/2002 (3)
  - Oil burning - Mike Bruns 04:11 5/28/2002 (2)
    - Mike Can you explain?...Tappered rings maybe? - Pat Chiang 14:57 5/28/2002 (0)
    - factory goetze rings work great - Terry 06:34 5/28/2002 (0)
i really want an e30 m3 but......... - edward 01:00 5/28/2002 (5)
- Re: i really want an e30 m3 but......... - Charley 01:59 5/28/2002 (4)
  - Re: i really want an e30 m3 but......... - ben 21:25 5/28/2002 (3)
    - Re: i really want an e30 m3 but......... - davebmw 14:11 5/29/2002 (2)
      - OK - Chris 15:54 5/29/2002 (1)
        
        go here and check out the conversions link. (url) - EricH 16:42 5/29/2002 (0)
homemade "remote start switch"... - Doug 23:53 5/27/2002 (7)
- You mean like this? (pic) - matt@gaugeman 14:47 5/28/2002 (5)
  - yeah, like that - any info on it?? (nt) - Doug 15:13 5/28/2002 (4)
    - Easy.... - matt@gaugeman 16:35 5/28/2002 (3)
      - which pin's ?? - Uwe 05:06 5/29/2002 (2)
        
        These pins... (pic) - matt@gaugeman 08:18 5/29/2002 (1)
        
        Thanks nT - Uwe 02:12 5/30/2002 (0)
- I'm making my own right now..... - sev7488 14:10 5/28/2002 (0)
How to test the Fuel Pump(s) ?? after injector ins - Doug 23:44 5/27/2002 (3)
- Turning the key to position 1 doesn`t operate..... - John A 13:20 5/28/2002 (1)
  - John you're always a big help, thanks. (nt) - Doug 15:04 5/28/2002 (0)
- Re: How to test the Fuel Pump(s) ?? after injector - Scott 08:01 5/28/2002 (0)
Bimmergate II Picnic / Meet on June 2nd........ - Bryan in DE 21:09 5/27/2002 (0)
Mainland European's.......... - Roops 17:52 5/27/2002 (5)
- Re: Thanks guys (nt) - Roops 07:58 5/28/2002 (0)
- autoscout24.de - Mike Bruns 04:12 5/28/2002 (2)
  - Re: autoscout24.de - Darren m 11:08 5/28/2002 (1)
    - Re: autoscout24.de - Roops 04:12 5/29/2002 (0)
- www.mobile.de (url) (nt) - Ed 19:07 5/27/2002 (0)
What does this sticker tell me? (pic) - S. Bean 15:32 5/27/2002 (1)
- 92 Recall was fixed, ref. the # on the sticker... - michael 14:26 5/28/2002 (0)
90' M3 with everything for sale - Terry 15:13 5/27/2002 (7)
- Re: 90' M3 with everything for sale - darren j 17:56 5/29/2002 (0)
- I live in S. CA Can I come by and look? - Damian-88/91M3 04:33 5/28/2002 (1)
  - emailed you (EOM) - Terry 06:38 5/28/2002 (0)
- What about the interior; shape and color (nt) - Gary 88 Lachssilber 17:35 5/27/2002 (1)
  - Sorry, forgot, that was sold a year ago: black EOM - Terry 06:35 5/28/2002 (0)
- Re: 90' M3 with everything for sale - ziggysnorkel 16:55 5/27/2002 (1)
  - chassis/engine/drivetrain not for sale, sorry EOM - Terry 06:35 5/28/2002 (0)
Car fax, urgent Please - buying soon 13:37 5/27/2002 (1)
- Re: Car fax, urgent Please - ziggysnorkel 08:24 5/28/2002 (0)
Roops - Tyre question (more) - DarranP 13:31 5/27/2002 (2)
- Re: Roops - Tyre question (more) - Roops 17:18 5/27/2002 (0)
- I have one more set of 15"...............nT - uwe 13:39 5/27/2002 (0)
@m3geezer simon - uwe 13:27 5/27/2002 (1)
- june 2nd uk meet - m3 geezer - simon mac 04:46 5/28/2002 (0)
What do you guys think of my new project?? (pic) - jeff87325ic 11:51 5/27/2002 (16)
- I could use some interior molding - g Benson 08:58 5/28/2002 (0)
- Parts needed - Phil 22:23 5/27/2002 (0)
- Do you work at Eurosport of Westfield.... - Chris F. 20:10 5/27/2002 (1)
  - Re: Do you work at Eurosport of Westfield.... - jeffnj87325ic 23:04 5/28/2002 (0)
- Re: What do you guys think of my new project?? - Mike E30M3 Cabrio Project 18:42 5/27/2002 (1)
  - Re: What do you guys think of my new project?? - jeffnj87325ic 00:26 5/30/2002 (0)
- Re: What do you guys think of my new project?? - ziggysnorkel 16:59 5/27/2002 (0)
- I need the front bumper..(more) (pic) - ROB89M3 12:29 5/27/2002 (2)
  - Re: I need the front bumper..(more) - jeffnj87325ic 13:26 5/27/2002 (1)
    - Check your email - ROB89M3 22:24 5/27/2002 (0)
- what exhaust is that? (just curious) (nt) - sev7488 12:06 5/27/2002 (