|
In Reply to: Seat Repair Question posted by Mike Barrett on January 06, 2001 at 18:20:50:
I did take the seat back off before I found it was the lever. The seat back is relatively easy to remove when you have the seat out of the car. there are two screws on each side and then you have to take off the cover for the head rest arm. This is a little tricky as there is a small hole in which you have to insert a small pin, punch, etc. to push and release the cover latch. The procedure is in the archives for this board which is where I found it. Once inside you can see the seat back release cables.
WWII