|
In Reply to: Re: 88'735i Trans Switch posted by Joe G on October 02, 2000 at 20:44:38:
Thanks for the info.Although I have a question, do I pry up the shifter housing to gain acess to the trans mode switch or do I pry the switch housing itself. Thanks again. Joe
Looks like your switch is dead. Mine had a similar problem. I fixed it by taking the switch out and cleaning it. This is how I took mine out: Pry a flat screw driver between the wood and housing for the shifter section. Carefully take it out (Don't break the plastic shifter vinyl cover roundel housing). Now use a smaller flathead to remove harness from the shifter switch. press on the cips located on the switch and pop it up. Good luck! I used windex and then a lubricant. Mine was sticky from coke!
Trans only stays in ecomony mode,great for gas milage not so great for performance. Any suggestions what may be the problem? Is it an easy fix? Is the switch easy to remove?