Re: Door lock quit working?? (archive)
[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Posted by Jyrki on November 13, 2000 at 14:45:01:
In Reply to: Re: Door lock quit working?? posted by gale on November 12, 2000 at 08:56:22:
(posted from: (208.51.31.130))
Unfortunately Bentley's photos on this one don't help much. I did this same repair on the driver's door. Here's a link with some tips. Should be intuitive if you have a small flashlight and a dental mirror, and can study it long enough. Access is confined. Use long narrow needlenose pliars or a hemostat, and a long slender screwdriver to work it back into place. If the plastic insert is missing, look for it down in the bottom of the door.gale
92 735i
Thanks guys!
With yours help i get it fixed.
Loop was out of hole close to lock and I was able to reattach it using little needle pliers and small flash light.
I also secure that using little wire ties end of it so it will not jumpout again.
Thanks for help!
And now I will have to change my driver side rear
shock it plow out all the fluids yesterday!
This is fun!!!!
-88 735iL
Follow Ups:
[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]