David: Yes their is something similar to a pvc valve on the 750's, in fact two. I don't know what BMW's name is for them, but I believe they serve the same purpose. They are located under the eml motors on the front end of the intakes. You will see a hose going to the valve cover and one going to the hose from the air cleaner to the eml's. One test to make sure they are working is to take off the oil filler cap and see if there is a vacuum, which I am told their should, per a BMW mechanic. There are four valves total in the system, and replacement cost is about $100 for the parts. Or you could try cleaning them with solvent. I believe the eml's have to be taken off to get to the valves, however I have not done this myself, but will in the next few months. Good Luck BobbyG