The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Dyno numbers on my '88 750iL (archive)
[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Posted by RobWilson on January 28, 2001 at 22:56:17:

I took my '88 750iL to a local chassis dyno shop yesterday. Here are the numbers measured at the rear wheels:

209.6 hp @ 5100 rpm
249.6 ft-lb @ 4100 rpm

Assuming 20% losses through the drivetrain that equates to 262 hp and 312 ft-lb at the motor. This is a little lower than the owner's manual says that the car should have (300 hp and 376 ft-lb). The dyno curve is a little rough, which usually indicates an ignition problem. From what my mechanic tells me, the car would probably be helped by new plug wires on the driver's side. I probably also need to have the injector's cleaned. Any other guesses as to where I could get back the lost horsepower? The car 224,000 km on it. It is losing a little oil from the driver's side valve cover as well. I've considered doing a couple of performance upgrades down the road, but I want to get it back in shape first. :) It has a few little things that need to be taken care of before I spend any money on performance upgrades (including the oil leak, new suspension accumulators, plug wires, A/C recharge, and the reverse lights).

Rob Wilson
'88 750iL


Follow Ups:


[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.