The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Ever had this happen? (archive)

[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]

Posted by alex lynch on April 03, 2001 at 20:20:31:

Just about to go to bed last night around 11:00 pm when my significant other casually mentions that the driver's window will not roll up and down. Out with the extension cord and portable light. Removed the door panel and found that the left-hand bottom edge of the window was no longer attached to the metal support bracket. The glue holding the glass in the bracket had failed allowing the glass to move out of the bracket and just flop around. Judiciously manhandled the glass back into the bracket, slowly raised the window until it fully closed, then disconnected the electric motor to prevent "accidental" (that's the term my children use) use of the window. I left the door panel off and let a local windshield company re-glue the glass.

I haven't seen or heard of this problem before. About a year ago I had to replace the metal plate on which the window mechanism pivots. However, I did notice that this was not the original glass (no BMW symbol and small glass pieces on the inside of the door) so I assume that the glass was replaced prior to my ownership. I would have thought that a new window would have come with the metal brackets pre-glued.

Alex



Follow Ups:



[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2017 Jump Internet Inc. All rights reserved.