The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Got It Solved (archive)

[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]

Posted by Chris 89 750iL on April 09, 2001 at 11:21:54:

In Reply to: Driver's Door Lock and Central Locking posted by Chris 89 750iL on April 06, 2001 at 08:55:02:

I decided to take the door apart with the intention to find the broken
but also just to see how it's all put together. I can tell that this door
handle assembly had been work on before.

What I discovered afer removing both assemblies was that the rod that
connects between the door lock assembly and the door handle assembly came
apart. I placed the plastic eyelet back in and fed the rod through. after
reinstalling the units, it was back to normal.

I did try Wayne's idea, but it didn't work. Thanks everyone.

Background: I left my lights on all day while at work with the car alarm on. This is a 1989 750iL. Needless to say, when I returned I couldn't open the doors, however, I remembered that you can manually open the door on the passenger's side by holding up the handle. I did this, but it wouldn't lift it high enough to unlock. I called my wife and asked her to reference my Bentley service manual. Lucky, my year also allowed access on the driver's side. Great, I'm in. I open the hood, and connected the jumper cables...Yes now I was scrambling to figure out how to reset it. It wasn't a matter of re-entering the code in the computer, not turning the ignition on. Finally I go it to stop, but my flashers wouldn't stop, so I pulled the relay and drove it home.

Now I tried to lock the doors, but the driver's door would lock. So I opened the door and turn the key 45 degrees and manually pushed it down. Now they all locked, but when I turned the key back to the 0 position (to remove the key) all the locks unlocked. This wouldn't stop.

I tried the syncronizing procedures from the Bentley. This didn't work. I disconnected the battery and reconnected. Great, my flashers stopped and all my exlectronics and windows worked again (except the radio). However, my driver's door lock doesn't go down. If I lock it by pushing down on it (with the key turned 45 degrees and the door open) everything locks and I can close the door.

Now the question: What's wrong? Are these components so fragile? I never forced anything, but it appears that the lock can be puched up when unlocked, but it's no going down. I evern tried to lock everything while in the car and disconnecting and reconnecting the negative battery cable. No luck.

Follow Ups:

[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk. Logo © 1997 - 2018 Jump Internet Inc. All rights reserved.