Henry..I am not a big fan of the hard plastic..(m) (archive)
[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]
Posted by George Mann on February 24, 2002 at 06:55:37:
In Reply to: Bump stops & guard tubes posted by Max Fretter (NZ 87 735i) on February 24, 2002 at 02:34:30:
(posted from: 06-098.008.popsite.net (66.19.23.98))
strut tubes that protect the shock..if you look
at the ETK, there is also an accordian plastic
tube or convoluted tube that will compress when
the fairly violent shock full jounce/bump stop
compression occurs. I don't personally believe the short hard plastic tube retains the cellulose
bump stop very effectively..I discarded them therefore and replaced with the corregated tube..
same design that came off my 90 735il.
Good Luck,
George
90 735il/145k
Dunno if your "cushions" are the bump-stops that go over the strut shaft, but mine were marginal, and not holding the protection/guard tubes dead-center. OK, apart from when the wheel gets lifted, then I have to watch the strut-insert holding nut doesn't crush the guard tube...
Just a thought.
Max
Follow Ups:
[ Follow Ups ] [ 7-series (E32) Message Board ] [ Msg. Board FAQ ]