|
In Reply to: Looking for 525it roof rack posted by Skinny on December 12, 2000 at 10:47:07:
I bought a Yakima locking railrider 1. With minor modification will fit the rails.
1. use the short srews, i used some old foam to elevate the metal plate
2. My rails were bent, with a punch and hammer I was able to straighten them
3. I took a sharp knife to remove some of the plastic of the bracket so it would apear flush.
I only removed plastic from the outside part.(20 min)
4. Use the rails don't use a rack that damages the doors
© 1997 -
2018
Jump Internet Inc. All rights reserved.
