The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Over torqued one of the three strut bolts (archive)

[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]

Posted by Chris Rose on August 03, 2001 at 18:59:28:

In Reply to: Re: Over torqued one of the three strut bolts posted by dudel on August 03, 2001 at 18:20:29:

Now that the panic has faded and I've had a chance to look back at Bently's, here's what I did.
Yes, the strut bolts into the upper strut mount. The upper strut mount bolts with to the body with three bolts. I twisted off one of those bolts on the passenger side upper strut mount. I should be able to replace just the bolt. But I think I have to remove the whole strut assy just to get to that bolt.
I'm thinking this is all related to the front end problems I've noticed. Something was weird with this strut. Why did it twist off at about 18 ft-lbs? If the torque spec is 16 it should have withstood much more than 18. Also I found that according to Bently's that I have the 1989-1992 type struts in front. However, my car is a 1995 with only 48K on it. I'm not sure what all of this means yet, but I beginning to wonder if I'm just starting to uncover what may be many more problems.


Not sure on your car, but doesn't the strut bolt into a cap with one bolt and the cap mount to the body with three bolts? If so, you should just be able to replace the cap.

Should be safe to drive, but I wouldn't go racing with it that way! If you want, call me next week and we can work on it some evening.


A '95 525iT.
I was checking torque on the strut bolts that bolt the strut into the body. There are three on each strut under the hood. Some were torqued to about 10 ft-lbs. Others to around 15 ft-lbs. I realize the spec is 16 ft-lbs. But I thought I'd torque them all to 20 ft-lbs because I've been having some movement under the front end that I can't figure out. Anyway I went around to torque them all to 20 but one of them only went to about 18 and then twisted off.
Is the car safe to drive now? Should I go with an OEM single strut or replace both with an after market?

Follow Ups:

[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk. Logo © 1997 - 2018 Jump Internet Inc. All rights reserved.