Re: how do you reset the service indicator (archive)
[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]
Posted by Jr on September 02, 2001 at 17:23:13:
In Reply to: how do you reset the service indicator posted by James on September 02, 2001 at 15:47:53:
(posted from: proxy2-external.peoria1.il.home.com (24.4.255.93))
Short pin # 7 and 19 on the dianostic connection, turn ignition to "on" (not start)position, leave key in on position for 5 seconds for an oil service reset and 11-12 seconds for an inspection reset. Remove short after the five seconds and you should be reset. Turn key back to off. A momentary contact switch with a little bit of wire and the right size bullets for the connector makes a good reset tool. Some people solder in a resistor for added protection. Just make damn sure you get the right pins!! The momentary contact switch also makes for a neat remote starter when adjusting the valves. Good luck!Jr
'89 535iA (Just reset my lights today!)
how do you reset the service indicator
Follow Ups:
[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]