The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
I get this from a guy who asked if you needed (archive)

[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]

Posted by Bill R. on October 17, 2001 at 11:42:06:

In Reply to: Friendly Flame: This is why BMW shouldn't give you posted by 5'ers toys from the 7 series 8-/ Q on October 17, 2001 at 10:48:35:

special tools to change a tie rod ?????? : )
Actually, yes I can read the owners manual and those are the instructions verbatim almost. I did the procedure exactly as outlined and it did not work, however back when i first got the vehicle i was able to get it to function...

First, (if you actually have the parking ventilation system),the ignition must be in position 1...NOT position 2...then you press the timer button (once)...then press the S/R button. The display should read "On" or "Off". The system should turn itself on if the system was previously off. If you want to program the system to turn itself on at a predetermined time...then press the S/R button again then select the "time" by pressing the appropriate 1000/100/10/1 buttons (make sure you choose the am/pm that's appropriate). (a red light on the left side of the "Timer" button should come on that indicates it has been programmed). If you want to program another time sequence (you can program 2 sessions), press the S/R button again then the 1000/100/10/1 buttons and the red light on the right side of the "Timer" button should light up to indicate the 2nd timed session is programmed. Turn your ignition off and remove key. At the predetermined time...your ventilation system should turn itself on and run for 30 min. If you interrupt the session by starting the car (or turning ignition to position 2) you will end the timed session.

I hope these instructions weren't "to difficult" to understand.

Q
91 735iL (I know how to work my stuff ;-) )
first got my car it tried it out and it worked. I tried it last night following the procedure in the owners manual and couldn't get it to work....I don't know if the first time I used the manual procedure or used a procedure off of the net...I never use it but thought that i would go through the steps to tell you what I did..






Follow Ups:



[ Follow Ups ] [ 5-series (E34) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2017 Jump Internet Inc. All rights reserved.