Thanks Al, problem solved; probe back in place!!! (archive)

: Lift your vehicle and look at air duct for the brakes.There should a hole on the side where that probe should snap in. I think that probe you're talking about is to the one that measures outside temp. for obc display. Hope this helps

:
: : Hi,

: : Today I found a wire hanging from under the
: : car. It is a yellow plastic peice and it
: : looks like there is a prob on the end of it.
: : Two wires are connected to it. I followed
: : the wires and they come together with wires
: : which look like they go to the head light
: : wiring (on the drivers side behind the head
: : light assembly. I did't know where to plug
: : it in so I just tucked it in with the other
: : wires so that it wouldn't hang under the car.
: : I don't know if this information will help,
: : but the front bumper was removed recently for
: : a paint job. Also, all the front lights work.

: : Thanks!
: : '92 325i

Follow Ups:

[ Follow Ups ] [ 3-series (E36) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.