Answers (archive)
[ Follow Ups ] [ 3-series (E36) Message Board ] [ Msg. Board FAQ ]
Posted by KC325 on April 09, 2000 at 18:49:24:
In Reply to: Keyless Entry and Alarm System for 1995 325i posted by Rahul Naidu on April 09, 2000 at 16:40:52:
(posted from: usr2-ppp18.tranquility.net (206.156.230.173))
I bought the kit from Pacific BMW and installed it myself on my '94 325i. It wasn't hard. I couldn't find the hood switch but that is all and it works fine without it. I'll go back and find it sometime. The only hard part is that certain models have a horn in a hidden cage that is connected to the OBC using the same cable you want to plug your siren into. So instead of just pulling out a loose cable and plugging it in, you have to unbolt the cage and disconnect that old horn to use the cable. (the siren will also work for what the horn was supposed to do too) Where are you located? I'm sure you can do it yourself if you want to. It took me a couple hours and i had to figure that horn thing out and I was very careful. You can e-mail me if you have any questions or if you are in Missouri, maybe I can help you if you want, but I doubt you are in Missouri. KC
'94 325iA Dinan Chip/CAI, X-brace
http://www.tranquility.net/~kc/
Follow Ups:
[ Follow Ups ] [ 3-series (E36) Message Board ] [ Msg. Board FAQ ]