|
In Reply to: Hazard light posted by graham3 on October 07, 2000 at 19:12:14:
R - 30 - 31 - 15 - L - 49A - 40 - 58D
On my 73 coupe they are connected as follows, hope this is of some help.
R = Blue/Black
30 = Double wire Red/White
31 = Brown
15 = Green/White stripe
L = Blue/Red stripe
49A = Green/Yellow stripe
40 = Green/Purple stripe
58D = not used
NOTE: NO GUARANTEE - Just a reminder that each and every coupe was (Quazo) custom built so the above may be different in
your case but it should give you a start..
Let me know if you need further clarification.
Mike
HHELP!
I asked someone (who will go unnamed) to grab the hazard light out of my 73 3.0cs, thinking that one would simply have to disconnect the harness. When I came home with the new hazard light, I went to install finding 8 seperate wires and no harness. I aked the individual who removed all the wires what order they were removed and the response I got was, "I thought you knew". Sooooo, here I am with a new hazard light and 100's of combinations (I guess this is were the college statistics class would have come in handy). Would anyone know the correct sequence or have wiring diagram that would show? The wire color codes are as follows:
Dbl wire red/white dot: Power
Green
Blue white
Blue/red
Brown
Green/yellow
Blue/black dot
Green/white
I guess the best order would be clockwise from the solder point.
Any help would be greatly appreciated!
I asked a dealership and they thought it had a harness so were no help.
© 1997 -
2008
Jump Internet Inc. All rights reserved.
