The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: correct wire hookup for window switches (archive)
[ Follow Ups ] [ CS (E9) Message Board ] [ Msg. Board FAQ ]
Posted by B.Moen on March 07, 2001 at 15:11:33:

In Reply to: correct wire hookup for window switches posted by Ed Orner on March 05, 2001 at 14:58:55:


I just repalced my 2800cs'power window switches and hooked up the wires as they were on the old ones, but now can get them to go up only. They are wired like this:
green w/yellow black
no wire green w/blue

if I switch the rear so green w/ blue is on the left and the bare spade connector is on the right, the window will go down only.

These are the switches with four spade connections, and there is a small slot in the switch body that I have on the left side.

All help is greatly appreciated.

according to the factory manual for the 2800cs, the green cable should go to terminal 33
black cable to terminal 32
green/blue cable to terminal 30

for the rear windows:
green/blue cable to terminal 30
black/red cable to terminal 32
green/yellow cable to terminal 33

hopr this helps


Follow Ups:


[ Follow Ups ] [ CS (E9) Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2009 Jump Internet Inc. All rights reserved.