Andrey - "euro" distributor part number (archive)

There's been a thread over the last few days on the CSR about DCOE's and disributors. Someone reliable had this to offer regarding the "euro" distributor you mentioned searching out:

If you can find one, you want a Bosch p/n 023 1184 008 distributor. I have them on both a Korman stage 2 3.0 with sidedrafts and a stock 3.0 with downdrafts. Used to be called "euro spec". Don't know if they are still available new (you could try Carl Nelson or Rick Haner), but there
are used ones around.

Hope that helps.

Follow Ups:

This is still a good Bosch # available in Atlanta Gretch 16:38 12/19/2001 (12)
- where? andrey 17:02 12/19/2001 (11)
  - Any Bosch Distributor Gretch 19:13 12/19/2001 (10)
    - Re: Any Bosch Distributor andrey 14:33 12/20/2001 (9)
      - Re: Any Bosch Distributor ?? Merdad 15:05 12/20/2001 (7)
        
        Yes, the 008s have vacuum cans Bill R 18:47 12/20/2001 (0)
        
        Re: Any Bosch Distributor ?? Merdad 15:10 12/20/2001 (5)
        
        that is not the one I need, no. andrey 16:34 12/20/2001 (4)
        
        Contact Irland Engineering at Merdad 19:26 12/20/2001 (1)
        
        thanks, I'll try them! andrey 20:57 12/20/2001 (0)
        
        I thought so, Merdad 19:10 12/20/2001 (1)
        
        yeah, the one for an 02 is easy to get andrey 20:57 12/20/2001 (0)
      - Re: Any Bosch Distributor Merdad 15:00 12/20/2001 (0)
Re: Andrey - "euro" distributor part number andrey 16:36 12/19/2001 (1)
- Its getting interesting.... yeros 16:46 12/19/2001 (0)

[ Follow Ups ] [ CS (E9) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.