CS s38(m5) engine test-fitting (archive)

To dispell any myths about needing to change the oil pan and pump to an older CS/Bav one or, modifying the front subframe; it doesn't have to be done! the s38 motor fits right into the subframe using the old e9 engine mounts without any clearance problems.

Next on the list::::: remove engine, fit an e23 hydro brake setup to the car. As a tii booster wont even fit!

Check out the pics!

Thanks for the help Andrey!

http://www.cloudfactory.org/~andrey/glcsi_pictures.html

Follow Ups:

What was the issue with the tii booster? Bill R 13:22 3/10/2002 (13)
- tii booser won't fit with the s38. ok for DCOE's 73tiiguy 13:58 3/10/2002 (12)
  - tii booser works fine for me... Geoff 17:17 3/10/2002 (11)
    - excellent! 73tiiguy 21:03 3/10/2002 (0)
    - please tell me more! andrey 17:41 3/10/2002 (9)
      - Re: please tell me more! Geoff 18:30 3/10/2002 (8)
        
        by the way, Geoff andrey 21:28 3/10/2002 (6)
        
        Re: by the way, Geoff Geoff 21:43 3/10/2002 (5)
        
        Re: by the way, Geoff andrey 22:27 3/10/2002 (4)
        
        Re: by the way, Geoff Geoff 22:35 3/10/2002 (3)
        
        Re: by the way, Geoff andrey 00:19 3/11/2002 (2)
        
        Re: by the way, Geoff Geoff 01:20 3/11/2002 (1)
        
        right andrey 02:01 3/11/2002 (0)
        
        interesting. thanks! andrey 21:27 3/10/2002 (0)
Re: CS s38(m5) engine test-fitting Merdad 11:02 3/10/2002 (0)
Re: CS s38(m5) engine test-fitting andrey 03:02 3/10/2002 (0)

[ Follow Ups ] [ CS (E9) Message Board ] [ Msg. Board FAQ ]

Questions, comments, or problems, please visit the Roadfly help desk.