In Reply to: which heatshield should I buy? Milos? posted by jeff on March 09, 1999 at 23:41:36:
I'm not sure you'd want to that. What I would do is:
1. Get a piece of sheet metal
2. Measure the sizes you want it cut into.
3. Decide wether you want it to be 1 or 2pcs. If you want it to be one piece, find a really bad machinist and they'll bend it for you for 5 bucks. If you want it to be two pieces, find another really bad machinist and he will cut it and drill the holes and bolt together for say 15 bucks.
4. Get a small bolt and nut and bolt the piece into place. If you take the correct measurements you should be fine, have spent less money, and be satisfied that YOU did your bit for YOUR car.
...OR you can by my itanium alloy with carbon fiber insert and nickel superalloy bolt package for only 3000 dollar. :)