In Reply to: Re: using front window switches for rear? M3/4 posted by new M3 on May 16, 1999 at 19:51:30:
: Well, if the switch along with the connections are displaced and moved to a new location (is that possible?), no software changes would be necessary. We would need a new panel with all switches on one side of the shifter... I dont think it is easy - the whole system may have to be reestablished, in that case software changes may also be required.
how auto up/down works....there are 2 detents in teh switch- meaning you push down a little bit and the window goes up or down as long as you hold it there, if you push a little harder the switch will "click" and go down further thus engaging the auto up/down feature...the switch has to be sending a different signal to the computer and the software tells the motor what to do...it isn't as simple as replacing the switch, but i don't know if the computer would know what to do with the siganl...putting the front switches is a 5 minute (at most) swap....the reason it is that way is so kids don't get caught in the window, i doubt the computer software will allow the one touch feature
btw- you never said what your name was