The complete automotive resource for buyers, sellers, and owners like you.
Car, Truck and SUV Forums at Roadfly
+ Bentley Forums
+ BMW Forums
+ Cadillac Forums
+ Chevrolet Forums
+ Ferrari Forums
+ Jaguar Forums
+ Lamborghini Forums
+ Lotus Forums
+ Mercedes-Benz Forums
+ Maserati Forums
+ MINI Forums
+ Porsche Forums
+ General Discussion
+ Marketplace Forums
Re: Instructions on UUC's site under Tech Tips.(m) (archive)

[ Follow Ups ] [ E36 M3 Message Board ] [ Msg. Board FAQ ]

Posted by HA on October 07, 2000 at 15:48:32:

In Reply to: Re: Instructions on UUC's site under Tech Tips.(m) posted by And where do you put the M'nM's? on October 07, 2000 at 15:29:52:

Itís funny because the system they talk about, you have to do all that drilling and "modifying" aka: permanently destroying the headlamp. There a lot of retrofit kits that are plug and play systems. The xenon arc tube fits into the stock 9006 holes via a small and simple adapter. There is no drilling, filing, gluing etc. Its 100% non-permanent and non intrusive, and furthermore you donít have to cut any wires to make it work. Your stock harness is already set. So if you ever want to sell the car, it takes about 1 minute to revert back to stock halogen. The system I speak of costs $600 and uses Hella ballasts and Philips arc tubes. I neither have one of those systems, or even an E36 (I've got an E32) but hope to get an E36 M3 soon. Now, European ellipsoids use H1ís right? I think in that case you have to modify the housing. Hope this sheds some light on the subject - hehehe get it. ok I know that was bad!


Follow Ups:



[ Follow Ups ] [ E36 M3 Message Board ] [ Msg. Board FAQ ]
Questions, comments, or problems, please visit the Roadfly help desk.
Roadfly.com Logo © 1997 - 2016 Jump Internet Inc. All rights reserved.