Today was terrible day for my M3. I was taking off my wheels and had the reas off with jack stands supporting the rear end. As I jacked up the front, one of the rear stands slipped and the car fell on the rotors. I could not believe it. Luckily, one side didn't make contact with the grond as the stand was wedged under the car and the other side actually hit the ground. The only damage I noticed was that the rotor dust cover was bent a little and it looked like the the jack stand prevented the car from fully impacting the ground. I put the wheels back on a drove a little and everything felt fine. Is there anything i should check for damage? Nothing looked bent, broken, or loose. If you have any ideas as to what I should thoroughly check, please let me know.