bimmer.org forums: BMW E36 M3 Forum Archive, 2001 week 21

The complete automotive resource for buyers, sellers, and owners like you.

Car, Truck and SUV Forums at Roadfly

+ Bentley Forums

+ BMW Forums

+ Cadillac Forums

+ Chevrolet Forums

+ Ferrari Forums

+ Jaguar Forums

+ Lamborghini Forums

+ Lotus Forums

+ Mercedes-Benz Forums

+ Maserati Forums

+ MINI Forums

+ Porsche Forums

+ General Discussion

+ Marketplace Forums

BMW E36 M3 Forum Archive, 2001 week 21

Search Archives

fs h&r rear lowering springs $75 - kosta 23:05 5/27/2001 (0)
Wanted: '95 M3 OEM MXX3 235/40/17 - stevew 22:59 5/27/2001 (0)
brembo question? - sedate 22:49 5/27/2001 (3)
- a long time. - xyzpl 16:08 5/28/2001 (0)
- Re: brembo question? - Dave 14:56 5/28/2001 (1)
  - Re: brembo question? - sedate 04:14 5/29/2001 (0)
Saw a red E46 M3 convertible in Santa Rosa (nt) - ///M3 Fahrer 22:29 5/27/2001 (0)
Tranny mount HOWTO (url) - ///M3 Fahrer 22:13 5/27/2001 (5)
- Nice write-up! How much do these bushings $? - M3-ed 00:22 5/29/2001 (1)
  - $75. Highly recommended - ///M3 Fahrer 15:45 5/29/2001 (0)
- Re: Tranny mount HOWTO - Bob 13:59 5/28/2001 (0)
- NE1 knows what happen if you... - M3RCR 22:34 5/27/2001 (1)
  - Don't know but..... - ///M3 Fahrer 13:50 5/28/2001 (0)
FS: AC Schnitzer Carbon Fiber pieces (reduced) (url) - 080///M3 22:09 5/27/2001 (0)
Suspension Upgrade - Dave 22:08 5/27/2001 (2)
- not everything, but a few more rattles, naturally - rockstar 17:52 5/28/2001 (0)
- Just due to stiffer components. Its a trade off - ///M3 Fahrer 22:14 5/27/2001 (0)
What is with everyones attitude. - BIGB 21:54 5/27/2001 (0)
What are the differences betw. 95 3.0 and 3.2's - yj 21:49 5/27/2001 (7)
- Re: What are the differences betw. 95 3.0 and 3.2' - Dave 22:10 5/27/2001 (0)
- Re: What are the differences betw. 95 3.0 and 3.2' - Vince 95 M3 22:10 5/27/2001 (5)
  - Which would you prefer?? 3.0 OBD1 or 3.2?? (nt) - yj 22:27 5/27/2001 (4)
    - Re: Which would you prefer?? 3.0 OBD1 or 3.2?? - Dave 22:31 5/27/2001 (3)
      - Re: Which would you prefer?? 3.0 OBD1 or 3.2?? - J Irwan 11:21 5/28/2001 (2)
        
        My results with 3.0 w/ mods Vs. 3.2 - Steve M 15:17 5/28/2001 (1)
        
        Thanks All.... Provided a lot of insight!! (nt) - yj 15:43 5/28/2001 (0)
whats the address for the bmw forum? nm (nt) - marwan 21:34 5/27/2001 (1)
- http://bimmerforums.com/ (url) - Wildhare 22:11 5/27/2001 (0)
Upgrading to 80w h1 bulbs in my euro headlights - Matt 21:30 5/27/2001 (1)
- Probably need to increase the fuses as well. (nt) - aus 04:05 5/28/2001 (0)
97 M3 or New 325? (NT) (nt) - Ron 21:27 5/27/2001 (1)
- Depends! ;) (nt) - Boris 23:31 5/27/2001 (0)
How do you remove sticker from paint? The type.> (nt) - ZV 21:27 5/27/2001 (1)
- Try heating with hair dryer - ///M3 Fahrer 22:16 5/27/2001 (0)
Pioneer CD Head Unit and 12 disc FOR SALE(m) - kj 21:06 5/27/2001 (0)
Weight of Alpina Softlines 17"? - Vince 21:01 5/27/2001 (1)
- If you find out, let me know also. (nt) - eurospeed 00:18 5/28/2001 (0)
Is it possible to convert from OBD-II to OBD-I? - ///Miami Vice 20:59 5/27/2001 (7)
- Definitely been done but hard to find any place - aus 04:07 5/28/2001 (0)
- Re: Is it possible to convert from OBD-II to OBD- - ///M3.2 21:06 5/27/2001 (5)
  - OB-I stage II AA turbo is faster than the OB-II - kit ///Miami Vice 21:44 5/27/2001 (4)
    - Re: OB-I stage II AA turbo is faster than the OB-I - ///M3.2 15:06 5/28/2001 (3)
      - Re: OB-I stage II AA turbo is faster than the OB-I - ///M3.2 20:48 5/28/2001 (0)
      - Re: OB-I stage II AA turbo is faster than the OB-I - ///M3.2 20:48 5/28/2001 (0)
      - Re: OB-I stage II AA turbo is faster than the OB-I - ///M3.2 20:46 5/28/2001 (0)
Need help regarding the ECU (more)... - Silver///M3 20:36 5/27/2001 (0)
Hello guys! I'm just passing through... (url) (pic) - Bob ///M3 20:31 5/27/2001 (2)
- About that other board... - JIM3 23:52 5/27/2001 (0)
- I like the stick man graphics. (pic) - ///M3 Fahrer 22:18 5/27/2001 (0)
I have redone my site, what do you think? (url) - ///Schnell M3C 20:10 5/27/2001 (1)
- Re: I have redone my site, what do you think? - Norm 21:28 5/27/2001 (0)
Im new to this board, I have some questions. - /// 20:01 5/27/2001 (4)
- Re: Im new to this board, I have some questions. - ///M3 Fahrer 22:20 5/27/2001 (0)
- Re: Im new to this board, I have some questions. - Dave 22:18 5/27/2001 (2)
  - Re: Im new to this board, I have some questions. - aus 04:16 5/28/2001 (1)
    - voher komen sie aus? - ///M3 Fahrer 13:53 5/28/2001 (0)
I'm New - SOUTHSHOREBIMMER 19:14 5/27/2001 (1)
- I'm from CT... hehe, Welcome :) (nt) - Boris 19:19 5/27/2001 (0)
ROFL!! (url) - Boris 18:56 5/27/2001 (0)
boris: age? - cameron 18:17 5/27/2001 (5)
- I'm 20, why? (nt) - Boris 18:40 5/27/2001 (0)
- Re: boris: age? - cameron 18:36 5/27/2001 (2)
  - Re: Do you have your driving license yet? - Eman 18:50 5/27/2001 (1)
    - Re: Do you have your driving license yet? - cameron 23:40 5/27/2001 (0)
- hehe - OmeyHomey 18:31 5/27/2001 (0)
top speed? - cameron 18:03 5/27/2001 (11)
- past 160mph needle mark, need to get lazered by a - Tong 23:32 5/28/2001 (0)
- 95 M3... 160 mph - ChewToy 07:04 5/28/2001 (3)
  - must be chipped. :) video link - rockstar 14:26 5/28/2001 (2)
    - rockstar - Tong 23:32 5/28/2001 (1)
      - abs light, a little opsie fixing soon.(more) - rockstar 06:48 5/30/2001 (0)
- 156 (url) - - DJ Vyb 22:20 5/27/2001 (0)
- 156mph - XCV ///MMM-Luxo 21:53 5/27/2001 (0)
- Heard some1 went 177mph with euro 6 tranny on USM3 - Kim 20:16 5/27/2001 (1)
  - you heard wrong...speed is drag limited - to around 155 regardless of gearing 19:16 5/29/2001 (0)
- 7000rpm Redline in 5th *nt - FastnFurious 19:35 5/27/2001 (1)
  - how fast were you going?? - M3RCR 19:57 5/27/2001 (0)
Here's the lowdown on Finish First Polish...>>>>>> - ZV 17:56 5/27/2001 (5)
- where can I purchase it? - 95DaytonaViolet 18:11 5/28/2001 (1)
  - www.firstfinishpolish.com - ZV 20:35 5/29/2001 (0)
- I'm glad you liked it. I've been - frayed 10:26 5/28/2001 (0)
- what color is your car? - //MMMGood 18:54 5/27/2001 (1)
  - Blk, that's why I was impressed, hard color to..> - ZV 20:58 5/27/2001 (0)
Review: Griots Oil Extractor. - JLee 17:18 5/27/2001 (6)
- Got one, works great! (m) - Steve-S M3 11:36 5/29/2001 (0)
- thx for the heads-up. you saved me $$ (nt) - frayed 10:28 5/28/2001 (0)
- Was the oil warm? - DE///M3 18:31 5/27/2001 (0)
- Re: Review: Griots Oil Extractor. - JLee 18:16 5/27/2001 (1)
  - Re: Review: Griots Oil Extractor. - Dave 22:41 5/27/2001 (0)
- that is too bad. I was going to get one. - //MMMGood 17:37 5/27/2001 (0)
About the performance flywheel???? - Wanabe M3 17:16 5/27/2001 (1)
- Call both and ask.. (m) - Boris 17:20 5/27/2001 (0)
ECIS install page - Edmund 95 M3 16:56 5/27/2001 (0)
To guys who have problems with their BMW dealers.. - Boris 16:38 5/27/2001 (2)
- Re: To guys who have problems with their BMW deale - Dave 22:00 5/27/2001 (1)
  - D'oh! That sucks, sorry to hear :( (nt) - Boris 00:40 5/28/2001 (0)
What do you guys think of RX-7's? - Boris 16:18 5/27/2001 (20)
- Re: What do you guys think of RX-7's? - Guy B 03:32 5/29/2001 (2)
  - Well, you probably know this... - Boris 16:54 5/29/2001 (1)
    - Re: Well, you probably know this... - Guy B 23:20 5/29/2001 (0)
- I've own 2 RX-7s... - xyzpl 16:30 5/28/2001 (1)
  - Awesome, thanks for the responce... :) (nt) - Boris 17:49 5/28/2001 (0)
- My take on this.............. - Steve M 22:01 5/27/2001 (1)
  - I planned on keeping it stock (m) - Boris 23:27 5/27/2001 (0)
- Re: My Rx7 Twin Turbo was a fast lemon - Jim Hodel 17:21 5/27/2001 (3)
  - I don't want an American car (m) - Boris 17:39 5/27/2001 (2)
    - Re: I don't want an American car (m) - Jim Hodel 17:48 5/27/2001 (1)
      - Defenitely not porsche, I'm spending up to $20k :/ - Boris 18:32 5/27/2001 (0)
- Had one, I would think seriously about..>>> - ZV 17:00 5/27/2001 (0)
- I've owned both (more) - Hyperknight 16:34 5/27/2001 (1)
  - Thanks, I will. (nt) - Boris 16:39 5/27/2001 (0)
- I'd be careful.....more.. - JB 16:22 5/27/2001 (5)
  - I plan on buying used... - Boris 16:27 5/27/2001 (4)
    - Re: I plan on buying used... - cameron 17:09 5/27/2001 (3)
      - No, it's RWD.. - Boris 17:11 5/27/2001 (2)
        
        Re: No, it's RWD.. - cameron 17:22 5/27/2001 (1)
        
        My friend had a '95 0-60 was 4.9 sec stock (nt) - Boris 17:35 5/27/2001 (0)
WTB: Factory CD Changer - black3 15:48 5/27/2001 (1)
- Check ur email (nt) - Rahul325 19:52 5/27/2001 (0)
People ask.. why M3... here's why... - Boris 15:43 5/27/2001 (5)
- Re: People ask.. why M3... here's why... - mike 16:38 5/29/2001 (1)
  - Fair enough.... - Boris 18:49 5/29/2001 (0)
- Re: People ask.. why M3... here's why... - Ron Claus 21:09 5/28/2001 (0)
- U said #1)For the name..that's kinda arogant... - BeeEmDoubleYou 12:23 5/28/2001 (1)
  - It's not necessarily #1, but it has to do with it. - Boris 14:03 5/28/2001 (0)
Anyone put 96 headers on a 95? Results? (nt) - 95COSM3 15:08 5/27/2001 (29)
- Re: Anyone put 96 headers on a 95? Results? - Harvey 17:22 5/27/2001 (13)
  - Sorry, I never said I installed it.. but.. - Boris 17:32 5/27/2001 (12)
    - not true boris, you get ALOT of HP from headers.. - OmeyHomey 17:57 5/27/2001 (11)
      - You will NOT get 15hp @ wheels, don't BS me! (m) - Boris 18:33 5/27/2001 (10)
        
        Then explain to me how harvey got that number. - OmeyHomey 18:40 5/27/2001 (7)
        
        Same way they say "bolt on 15hp in 2 hours" - Boris 18:42 5/27/2001 (5)
        
        He did it, you didnt, so i believe him alot more - OmeyHomey 01:59 5/28/2001 (4)
        
        Keep believing.. - Boris 03:28 5/28/2001 (3)
        
        yeah you proved you dont understand what i say - OmeyHomey 20:27 5/28/2001 (2)
        
        Erm.. sorry.. maybe I misunderstood... long day :( (nt) - Boris 23:37 5/28/2001 (1)
        
        its ok, i understand, no offense taken - OmeyHomey 00:24 5/29/2001 (0)
        
        Actually harvey got more - OmeyHomey 18:41 5/27/2001 (0)
        
        all of you shut up... - andy r. 18:36 5/27/2001 (1)
        
        true, but harvey no longer has his dyno sheets - OmeyHomey 18:42 5/27/2001 (0)
- I just came here to ask that very same question - ultim3 16:04 5/27/2001 (14)
  - Let me explain..... - OmeyHomey 17:55 5/27/2001 (8)
    - Also... since you insulted my intelligence... - Boris 18:38 5/27/2001 (7)
      - Re: Also... since you insulted my intelligence... - andy r. 18:46 5/27/2001 (6)
        
        No, I'm not a gas flow physicist... but.. - Boris 18:49 5/27/2001 (5)
        
        Re: No, I'm not a gas flow physicist... but.. - andy r. 19:02 5/27/2001 (4)
        
        Re: No, I'm not a gas flow physicist... but.. (pic) - andy r. 19:05 5/27/2001 (3)
        
        Thanks for the pic... (m) - Boris 19:08 5/27/2001 (2)
        
        Re: Thanks for the pic... (m) - andy r. 19:13 5/27/2001 (1)
        
        Yes, it's affected... - Boris 19:19 5/27/2001 (0)
  - About the headers... - Boris 16:24 5/27/2001 (4)
    - Forgot to add... - Boris 16:41 5/27/2001 (3)
      - Re: Forgot to add... - ultim3 16:59 5/27/2001 (2)
        
        Dude dont listen to boris, it will help ALOT.... - OmeyHomey 18:01 5/27/2001 (0)
        
        Like I said... MINIMAL if any. - Boris 17:08 5/27/2001 (0)
M3 prices! - cameron 13:34 5/27/2001 (12)
- Re: M3 prices! - turbotwo 19:57 5/29/2001 (0)
- Cheap here in TX, buy here then drive to Cali. - ZV 17:02 5/27/2001 (1)
  - Re: Cheap here in TX, buy here then drive to Cali. - cameron 18:04 5/27/2001 (0)
- Get one in the Mid-South!! - JB 16:26 5/27/2001 (0)
- could have done better with 50k 3 years ago !!! - Steve M 14:19 5/27/2001 (2)
  - Re: could have done better with 50k 3 years ago !! - cameron 14:26 5/27/2001 (1)
    - talking about investments....... - Steve M 15:41 5/27/2001 (0)
- Re: M3 prices! - MSC 14:01 5/27/2001 (4)
  - Re: M3 prices! - cameron 14:19 5/27/2001 (3)
    - Re: M3 prices! - MSC 14:34 5/27/2001 (2)
      - Re: M3 prices! - cameron 15:36 5/27/2001 (1)
        
        now now boys, this is M3 board not real estate! :) - marwan 16:07 5/27/2001 (0)
Was M3/4 stick 98 only? nt (nt) - Dave 13:06 5/27/2001 (1)
- 97 had 5spd as well - ///MCubed 13:11 5/27/2001 (0)
FS:Mozart Exhaust/Located in Bay Area/will ship.. - BlauM3 12:01 5/27/2001 (3)
- Re: FS:Mozart Exhaust/Located in Bay Area/will shi - ultim3 16:21 5/27/2001 (0)
- Re: FS:Mozart Exhaust/Located in Bay Area/will shi - cameron 13:02 5/27/2001 (1)
  - It sounds cool.....and looks hella cool... - BlauM3 13:21 5/27/2001 (0)
Who would have the cheapest price for a gas filter - M3er 11:38 5/27/2001 (1)
- try www.thepartsbin.com they have good $ on parts (nt) - SACHS'///M3 03:12 5/30/2001 (0)
Anyone want a RD chip for an early production 95M3 - 95DaytonaViolet 10:33 5/27/2001 (0)
Thinking of trading M3/2 for M3/4 - questions??? - 95DaytonaViolet 10:23 5/27/2001 (6)
- Re: M3/4 - answers (url) - Jim Rohn 21:38 5/28/2001 (1)
  - thanks all for the feedback - next yr, it's a M3/4 - 95DaytonaViolet 08:32 5/29/2001 (0)
- performance is the same, a bit more head room in 4 - gazoline 21:07 5/27/2001 (0)
- Re: Thinking of trading M3/2 for M3/4 - questions? - andy r. 18:39 5/27/2001 (0)
- I traded my 95 coupe for a 97 sedan...(more) - ///M3/4 Driver 16:14 5/27/2001 (0)
- Re: Thinking of trading M3/2 for M3/4 - questions? - Larry 16:09 5/27/2001 (0)
bmp intake vs ecis? - jeff greer 09:39 5/27/2001 (0)
any bmw employees here? - rockstar 06:00 5/27/2001 (0)
will vaders fit in sedan? - sedate 05:19 5/27/2001 (3)
- They will fit. I've just done it - SJTrance328 11:28 5/28/2001 (0)
- I think they will - Dan Wang 14:23 5/27/2001 (1)
  - Re: I think they will - sedate 20:38 5/27/2001 (0)
how do you know if your synchros are gone? - M3 EVO 05:14 5/27/2001 (4)
- Re: how do you know if your synchros are gone? - Boris 11:43 5/27/2001 (3)
  - thanx! - M3 EVO 15:22 5/27/2001 (2)
    - expensive to repair? (nt) - sedate 22:46 5/27/2001 (1)
      - Couldn't tell you, I never did... (nt) - Boris 01:28 5/28/2001 (0)
stock exhaust for sale - XCV ///MMM-Luxo 04:50 5/27/2001 (0)
CV Joint problem - CM3 04:40 5/27/2001 (0)
NE1 selling stock 96+ springs for cheep? - ZippyM3 02:47 5/27/2001 (2)
- stock 96 328 springs CHEAP-email if interested (nt) - 328isshark 16:58 5/27/2001 (0)
- too bad, i got 95 i would sell. - rockstar 05:38 5/27/2001 (0)
To Sam3anth... again (url) - Boris 02:41 5/27/2001 (4)
- Re: To Sam3anth... again - michael 12:07 5/27/2001 (3)
  - Nah, it's totalled... not worth the fix ;( - Boris 12:26 5/27/2001 (2)
    - you gonna get another, boris? - M3 Repete 12:56 5/27/2001 (1)
      - That's why I'm looking for an M3 :) - Boris 13:05 5/27/2001 (0)
Dent/Ding removal, please read (more) - Baby ///M3 a.k.a. Jon 02:41 5/27/2001 (13)
- Most paintless dent removal companys... - M3-ed 17:00 5/27/2001 (1)
  - Re: Most paintless dent removal companys... - Baby ///M3 a.k.a. Jon 18:30 5/27/2001 (0)
- Friend of mine has a co., charges $100 for 6+ (url) - DJ Vyb 14:12 5/27/2001 (2)
  - Re: Friend of mine has a co., charges $100 for 6+ - Baby ///M3 a.k.a. Jon 15:55 5/27/2001 (1)
    - Re: Friend of mine has a co., charges $100 for 6+ - DJ Vyb 16:38 5/27/2001 (0)
- I had about 5 from some nuts falling off (m) - 98M3 11:15 5/27/2001 (1)
  - Re: I had about 5 from some nuts falling off (m) - Baby ///M3 a.k.a. Jon 16:00 5/27/2001 (0)
- You can pop 'em out for like $50-100 per at dealer (nt) - Boris 02:43 5/27/2001 (5)
  - Thanks. Any where else that I can do this at? n/t - Baby ///M3 a.k.a. Jon 03:00 5/27/2001 (4)
    - Not that I know of... sorry (nt) - Boris 03:03 5/27/2001 (3)
      - Re: Not that I know of... sorry - Baby ///M3 a.k.a. Jon 03:14 5/27/2001 (2)
        
        Was going to, read about it, then crashed car :( (nt) - Boris 11:41 5/27/2001 (1)
        
        Sorry to hear that. Hope everything was okay..n/t - Baby ///M3 a.k.a. Jon 15:53 5/27/2001 (0)
shifter rod - Joy 02:32 5/27/2001 (0)
Just got the new 6 puck clutch. (nt) - GILS///M3 01:33 5/27/2001 (1)
- Well?? Don't leave me hangin man!! :) - e36Thor 12:24 5/29/2001 (0)
ECIS website? anyone. (nt) - MexM3 00:52 5/27/2001 (1)
- www.ecisbmw.com - m3power 01:12 5/27/2001 (0)
FS: ECIS silver aluminum cover... (pic) - marwan 00:33 5/27/2001 (2)
- Why not use the cover? It looks trick. - Ken ///M3 19:04 5/27/2001 (1)
  - couldnt be bothered! - marwan 23:49 5/27/2001 (0)
WTB: LTW Front Splitter in good condition. - ///MSport 00:15 5/27/2001 (0)
How long does it tae to break in an exhaust ???? - Yspec Dakar ///M3 23:52 5/26/2001 (5)
- NOT TRUE, they get louder with use.... - OmeyHomey 18:29 5/27/2001 (1)
  - Thought after packing burns out, it get's louder? - ZV 21:01 5/27/2001 (0)
- what kind did you get? (nt) - rockstar 05:40 5/27/2001 (0)
- It usually takes the first 1k miles to break in (m - kim 04:30 5/27/2001 (0)
- You don't... Plug'n'Play! (nt) - Boris 01:59 5/27/2001 (0)
Window TINTS? - newm3 23:31 5/26/2001 (4)
- Re: Window TINTS? - JB 16:29 5/27/2001 (0)
- Re: Window TINTS? - Yspec Dakar ///M3 23:47 5/26/2001 (2)
  - Re: Window TINTS? - newm3 00:03 5/27/2001 (1)
    - Re: Window TINTS? - johnW 00:42 5/27/2001 (0)
How long do stock shocks and springs last? - Zippy M3 22:42 5/26/2001 (1)
- Depends on roads, driving habits.. (m) - Boris 01:58 5/27/2001 (0)
Air in Brake Lines - Eddie 22:34 5/26/2001 (0)
255-40-17 fit on 8.5'' without rubbing? (nt) (nt) - mmm3 22:07 5/26/2001 (1)
- Re: 255-40-17 fit on 8.5'' without rubbing? (nt) - G-Man 23:22 5/26/2001 (0)
I need an airflow meter - Mike (318i custom) 21:58 5/26/2001 (0)
Riding the clutch in 1st gear okay - in parking lots? I remember(m) 21:30 5/26/2001 (2)
- How do u drive safely in 1st w/o riding clutch? - Vibe 23:39 5/26/2001 (1)
  - yea, i agree.. just wanted to make sure (nt) - thanks. mike 23:46 5/26/2001 (0)
dumb question...shifting - Speedracer 20:40 5/26/2001 (10)
- Honda probably a little smoother - Brouhaha 00:08 5/27/2001 (1)
  - That notchiness.... - Boris 01:56 5/27/2001 (0)
- No way is BMW's tranny better than Hondas (m) - Boris 21:28 5/26/2001 (4)
  - Re: No way is BMW's tranny better than Hondas (m) - Speedracer 22:46 5/26/2001 (2)
    - Had A GSR before M - newm3 23:05 5/26/2001 (1)
      - Re: Had A GSR before M - Eman 19:50 5/27/2001 (0)
  - I agree...Honda=one of the best/smoothest manual - newm3 22:28 5/26/2001 (0)
- You're right - dumb question...shifting - tpsm3 21:25 5/26/2001 (2)
  - Re: You're right - dumb question...shifting - Speedracer 23:01 5/26/2001 (1)
    - reverse is spring loaded to the left, then up - newm3 23:10 5/26/2001 (0)
FS:any 4 of 5 M3's i have. 95-98,DinanSC - trevor 20:37 5/26/2001 (0)
AGGGHH HELP! SHOCKS SQUEAKY NOISE... - marwan 20:25 5/26/2001 (0)
Problem with Harmon Kardon... - newm3 20:11 5/26/2001 (0)
squeeking sound from behind driver's seat..... - alex 19:21 5/26/2001 (4)
- Re: squeeking sound from behind driver's seat..... - Dan Wang 14:25 5/27/2001 (0)
- Re: squeeking sound from behind driver's seat..... - JLee 11:53 5/27/2001 (0)
- Damn Gerbils!!!! - Pest control 19:40 5/26/2001 (1)
  - LOL - Richard Gere 21:49 5/26/2001 (0)
Spring install need help or advice(more) - kj 19:15 5/26/2001 (3)
- Here's some... - 080///M3 03:09 5/27/2001 (0)
- Re: Spring install need help or advice(more) - Yspec Dakar ///M3 23:49 5/26/2001 (0)
- Re: Spring install need help or advice(more) - BobS-RI 23:34 5/26/2001 (0)
Spark plug gaps for max. perf. - Mark 19:12 5/26/2001 (2)
- DO NOT TOUCH SPARK PLUGS!!! err... - Boris 19:15 5/26/2001 (0)
- DO NOT TOUCH SPARK PLUGS!!! - Boris 19:13 5/26/2001 (0)
Will 235/40/17 tires work on all 4's (96M3)? - Gary P. 19:10 5/26/2001 (4)
- thanks for all of ya inputs. - Gary P. 18:38 5/27/2001 (0)
- yes, my car has this. It is the stock size for 95. - M3-ed 17:07 5/27/2001 (0)
- It will work with staggered setup. (m) - Dave N. 12:01 5/27/2001 (0)
- Yes - Boris 19:11 5/26/2001 (0)
1998 M3 used regular or super unleaded gas? (nt) - joe 19:01 5/26/2001 (2)
- Super - see owner's manual (or inside gas flap). (nt) - Norm 22:26 5/26/2001 (0)
- I only use 91-94 gas,high compression engine... (nt) - Boris 19:10 5/26/2001 (0)
1998 M3 used regular and super unleaded gas? (nt) - joe 19:00 5/26/2001 (2)
- 91 octane minimum (nt) - Brouhaha 00:38 5/27/2001 (0)
- super unleaded - Wildhare 19:10 5/26/2001 (0)
AGGGHH HELP! SHOCKS SQUEAKY NOISE... - marwan 18:54 5/26/2001 (2)
- Re: AGGGHH HELP! SHOCKS SQUEAKY NOISE... - CM3 04:43 5/27/2001 (0)
- My friend had the same... on TWO cars (m) - Boris 19:12 5/26/2001 (0)
squeaky steering wheel - AO97M3 18:30 5/26/2001 (0)
LA Chapter - Wildhare 18:08 5/26/2001 (2)
- Here you go. (url) - aus 12:24 5/27/2001 (1)
  - thanks - Wildhare 17:14 5/27/2001 (0)
Texas Gathering--Map and Details!! (pic) - adam p 17:44 5/26/2001 (3)
- Re: Texas Gathering--Map and Details!! - 99 Dinan Yellow M3 20:26 5/26/2001 (2)
  - Re: Texas Gathering--Map and Details!! - adam p 21:18 5/26/2001 (1)
    - Be careful, somebody always crashes on these..>> - ZV 16:21 5/27/2001 (0)
BMW M3, Mustang Cobra or Lexus IS 300? - Ron Claus 17:37 5/26/2001 (9)
- First 911&BMW M3, Mustang Cobra an Lexus IS 300 (nt) - M3 GT 06:11 5/27/2001 (0)
- IS300 and Cobra ..then m3 - Vibe 18:52 5/26/2001 (3)
  - I agree with these picks because....>>>> - ZV 16:42 5/27/2001 (0)
  - disagree - M3 Repete 12:59 5/27/2001 (0)
  - Why all the slams on the M3 lately? - Brouhaha 00:32 5/27/2001 (0)
- u can get an m3 cheaper than 32k, even 97-98 - ...........Dhan............ 18:45 5/26/2001 (0)
- Get a good used low Miles 95M3.... - OmeyHomey 18:04 5/26/2001 (1)
  - i second that 23k for 95 with 34k miles - rockstar 05:45 5/27/2001 (0)
- u can get an m3 cheaper than 32k, even 97-98 - ...........Dhan............ 17:49 5/26/2001 (0)
Buying M3... please state your oppinion.. - Boris 16:48 5/26/2001 (16)
- Re: Buying M3... please state your oppinion.. - Norm 11:32 5/27/2001 (1)
  - That's not a new model VW - I meant "Jetta" :-) - Norm 11:33 5/27/2001 (0)
- i have a high mileage one and here's the lowdown - XCV ///MMM-Luxo 04:05 5/27/2001 (0)
- Sounds like a great deal - Vibe 18:55 5/26/2001 (0)
- Suck it up and save for 1 with low mileage - Brouhaha 17:26 5/26/2001 (7)
  - Well, I can buy... - Boris 17:39 5/26/2001 (6)
    - Id rather have the 95... - newm3 23:19 5/26/2001 (0)
    - Is that the one in Danbury? - Evan[318ti] 22:23 5/26/2001 (0)
    - If you decide to pass the Avus,Can you pst details - . 18:56 5/26/2001 (1)
      - It's located in CT... - Boris 19:08 5/26/2001 (0)
    - get the mint 95 Avus M3, thats a very good deal - OmeyHomey 18:06 5/26/2001 (0)
    - IMO- dove grey will show dirt to much. (nt) - Norm 17:59 5/26/2001 (0)
- More... - Boris 17:15 5/26/2001 (3)
  - Better do some research on adding full comp (m) - Norm 18:01 5/26/2001 (0)
  - interior will always be worn...I mean 90K miles - //MMMGood 17:18 5/26/2001 (1)
    - I duno.. I've seen all mint m3's so far... (m) - Boris 17:22 5/26/2001 (0)
Any1 put digital HVAC in 95's, is it possible? (nt) - ...........Dhan............ 16:42 5/26/2001 (4)
- Re: Any1 put digital HVAC in 95's, is it possible? - yeah 18:48 5/26/2001 (3)
  - i couldnt find anything, but as long as its possib - ...........Dhan............ 23:44 5/26/2001 (2)
    - here's the link (url) - andy r. 04:43 5/27/2001 (1)
      - Thnks alot - ...........Dhan............ 14:21 5/27/2001 (0)
Aftermarket compoenents - Tom///m3 16:08 5/26/2001 (1)
- Adding an amp should help some...but stock> - LUNI2NZ 19:30 5/26/2001 (0)
Another E-Bay bozo for your amusement - Brouhaha 16:06 5/26/2001 (2)
- i like that paint though with the flags - Brett 18:20 5/26/2001 (0)
- Thanks Brouhaha, I need a good laugh - Chris, Windy City Chapter 16:40 5/26/2001 (0)
HOUSTON BMWS: last reminder of Meet tonight (sat) - OmeyHomey 15:58 5/26/2001 (2)
- You know I'm there if mother nature permitts (nt) - SJTrance328 16:35 5/26/2001 (1)
  - I understand, It will probably be ok by 9:00 - OmeyHomey 17:58 5/26/2001 (0)
Do any of your passengers complain - of a jerky ride? (More) 15:54 5/26/2001 (5)
- The more performance oriented a car is, the > - LUNI2NZ 19:33 5/26/2001 (0)
- I get the opposite - Zippy M3 18:23 5/26/2001 (0)
- Never heard one complaint - Brouhaha 16:10 5/26/2001 (2)
  - Thanks, maybe i am getting too accelerator - -happy.and BTW Brouhaha(m) 18:01 5/26/2001 (1)
    - Lol, sure... - Brouhaha 21:38 5/26/2001 (0)
WTF! Went to change oil today on my BMWs and.. - PlanoSilverM3 15:41 5/26/2001 (2)
- I think the E46 board said 36mm some weeks ago. - Beldar 15:51 5/26/2001 (1)
  - thank you! (nt) - PlanoSilverM3 16:11 5/26/2001 (0)
WTF! Went to change oil today on my BMWs and.. (nt) - PlanoSilverM3 15:39 5/26/2001 (0)
Thinking about S4 until I saw how plain it looks - Vibe 15:24 5/26/2001 (1)
- no it is different. I like the wagon more than sed - //MMMGood 15:27 5/26/2001 (0)
How do you tell date of build? - Brouhaha 14:29 5/26/2001 (1)
- Inside drivers door (D.O.B) on side (nt) - Regensburg. mike 15:13 5/26/2001 (0)
NE 1 want to trade a set of 97+ 10 spoke rims for - Dustin 14:12 5/26/2001 (0)
FS: 18" Breyton Competition Rims w/Tires (url) (pic) - Michael 13:26 5/26/2001 (0)
Help changing fog lights ! - JLee 12:59 5/26/2001 (1)
- No, you dont.. - Boris 13:17 5/26/2001 (0)
***************Rattle sound were from clutch area? - Jimmy 12:54 5/26/2001 (3)
- Re: ***************Rattle sound were from clutch a - Boris 13:16 5/26/2001 (2)
  - Re: ***************Rattle sound were from clutch a - Jimmy 14:11 5/26/2001 (1)
    - Re: ***************Rattle sound were from clutch a - Boris 16:44 5/26/2001 (0)
Best Springs? - m3style 12:52 5/26/2001 (1)
- Whatever you do.... - Boris 13:21 5/26/2001 (0)
Best high perform.Clutch? what about Paeco(kevlar (nt) - Jimmy 12:51 5/26/2001 (1)
- Re: Best high perform.Clutch? what about Paeco(ke - SJTrance328 13:05 5/26/2001 (0)
help my car always says washer fulid low now! - Matt 12:45 5/26/2001 (2)
- Re: help my car always says washer fulid low now! - Jimmy 12:59 5/26/2001 (1)
  - Re: help my car always says washer fulid low now! - ///John 22:17 5/28/2001 (0)
FS: 17x8 Breyton Softline wheels - Keith 12:41 5/26/2001 (0)
FS: 17x8 Breyton Softline wheels - Keith 12:36 5/26/2001 (0)
R U Looking for BMW part's/Acces/Body Kit ??? - indra 12:18 5/26/2001 (0)
R U Looking for BMW part's/Acces/Body Kit ??? (nt) - indra 12:16 5/26/2001 (0)
Trackin?? - Wildhare 11:56 5/26/2001 (2)
- Re: Trackin?? - peteinsd 12:43 5/26/2001 (1)
  - Re: Trackin?? - M3RCR 13:40 5/26/2001 (0)
Bogus Euro M3 - Brouhaha 11:39 5/26/2001 (29)
- A couple of things - Van1 08:24 5/27/2001 (0)
- Definetly NOT A EURO M3, from some one in EURO - ///Mark 05:26 5/27/2001 (2)
  - Re: Definetly NOT A EURO M3, from some one in EURO - ttaM3 18:17 5/28/2001 (1)
    - Re: Definetly NOT A EURO M3, from some one in EURO - ///Mark 18:07 5/29/2001 (0)
- more fake stuff: - XCV ///MMM-Luxo 04:22 5/27/2001 (0)
- You can plainly tell its fake, Heres why - Kim 01:42 5/27/2001 (1)
  - It's actually an oil temp gauge, but point taken (nt) - Brouhaha 02:58 5/27/2001 (0)
- WARNING! FAKE, ETK says US version car, made 12-95 - MexM3 18:09 5/26/2001 (0)
- Totaly fake car. read on - MexM3 17:24 5/26/2001 (0)
- US Spec headlights as well, instead of the - Ellipsoids -- James n/t 14:47 5/26/2001 (1)
  - Again, could be part of federalization but (m) - Norm 16:04 5/26/2001 (0)
- some things check out, others don't (more) - PM3 13:25 5/26/2001 (0)
- are you sure he doesn't mean euro delivery? - Scott Yu 12:23 5/26/2001 (0)
- Interesting though that the gas guage is euro (m) - ttaM3 11:57 5/26/2001 (3)
  - What's the difference b/t euro and u.s. fuel gauge - Brouhaha 12:13 5/26/2001 (1)
    - Nevermind, found it! - Brouhaha 14:22 5/26/2001 (0)
  - also: '96 euro tranny is 6-speed, shift knob on th (nt) - is car indicates 5-speed (nt) 12:08 5/26/2001 (0)
- When I researched importing an E34 M5 (m) - Norm 11:55 5/26/2001 (0)
- ROFL.... heheh.... - Boris 11:48 5/26/2001 (10)
  - Re: ROFL.... heheh.... - Norm 11:57 5/26/2001 (8)
    - True, but... - Brouhaha 12:22 5/26/2001 (7)
      - Re: True, but... - Norm 13:46 5/26/2001 (6)
        
        This car is a scam and here is why...(more) - ///M3/4 Driver 13:56 5/26/2001 (4)
        
        GB is not a metric country? - Van1 08:07 5/27/2001 (2)
        
        The only thing not metric in GB is the beer that (nt) - comes in Pint glasses. Van1 08:28 5/27/2001 (1)
        
        Re: The only thing not metric in GB is the beer th - ///Mark 18:03 5/27/2001 (0)
        
        Your argument seems logical. (nt) - Norm 16:06 5/26/2001 (0)
        
        Meant "plug", instead of "plu". (nt) - Norm 13:47 5/26/2001 (0)
  - No, the Air Force Kernal put the spoiler on, lol - Brouhaha 11:49 5/26/2001 (0)
OT:Can anyone here get madonna tickets(NY/NJ)? (nt) - galileo 10:58 5/26/2001 (0)
DYMAG 18x8.5x40mm WHEELS for Sale - James 10:05 5/26/2001 (0)
M3 owners are fags (nt) - Kill the fags 09:27 5/26/2001 (5)
- Re: M3 owners are fags - M3Cycln 14:58 5/26/2001 (0)
- Re: M3 owners are fags - M3Cycln 14:58 5/26/2001 (0)
- Hmmm ... did a quick archive search for (m) - Norm 11:24 5/26/2001 (1)
  - Because he has no life, DUH! :) (nt) - Boris 11:28 5/26/2001 (0)
- Paranoid weenie. (nt) - Norm 11:08 5/26/2001 (0)
Besides r/trail arm, any f/suspension weak links?? - BB 09:14 5/26/2001 (0)
Top side Oil changer - Alex 08:17 5/26/2001 (1)
- Re: Top side Oil changer - Ken ///M3 17:02 5/26/2001 (0)
diff from 95 to 97 exhaust? anyone? (nt) - rockstar 07:36 5/26/2001 (0)
Exhaust Question ????? - Yspec Dakar ///M3 03:08 5/26/2001 (2)
- Re: Exhaust Question ????? - Yspec Dakar ///M3 03:23 5/26/2001 (1)
  - you could remove your cat and bend your mounts.eom - eugene lou 08:40 5/26/2001 (0)
Headrest removal (dumb question) - Fred 01:13 5/26/2001 (2)
- Re: Headrest removal (dumb question) - Dave 01:20 5/26/2001 (1)
  - Wow, thanks for the fast response! - Fred 01:30 5/26/2001 (0)
John Roberts BMW Austin - even more incompetence - Austin Tim 00:35 5/26/2001 (11)
- Re: John Roberts BMW Austin - even more incompeten - Vince 95 M3 23:36 5/26/2001 (0)
- Oh crap. - frayed 18:01 5/26/2001 (2)
  - Re: Oh crap. - Austin Tim 00:23 5/27/2001 (0)
  - Re: Oh crap. - 99 Dinan Yellow M3 20:29 5/26/2001 (0)
- And ALL the Houston Dealer's wonder why I never... - DCC 13:57 5/26/2001 (0)
- John Roberts BMW Austin is USELESS (url) - 99 Dinan Yellow M3 08:55 5/26/2001 (1)
  - Re: Hey, '99 Dinan Yellow... - Ricky Crow 10:47 5/26/2001 (0)
- Ombudsman - eugene lou 08:39 5/26/2001 (0)
- I live in Dallas, they all suck!!! Rated them low> - ZV 08:18 5/26/2001 (0)
- My relatives in Dallas complain about it to... - madsedan 00:46 5/26/2001 (1)
  - Re: My relatives in Dallas complain about it to... - 1999 M3 white 04:48 5/26/2001 (0)
Install Metal Shift Knob and Aluminum Brake Lever! (pic) - Fly2LoW 00:24 5/26/2001 (3)
- yeah, i love my teflon one too!! RD stuff is best! (pic) - [m3ryder] 03:30 5/26/2001 (2)
  - tha looks ugly!!! (pic) - marwan 12:38 5/26/2001 (1)
    - Why do you have to bash his car? He likes it- (pic) - M3-ed 16:34 5/26/2001 (0)
Q. about the performance flywheel??? - M3 Wanabe 00:15 5/26/2001 (0)
Parts needed - Brian Bitner 00:08 5/26/2001 (0)
History of BMW Motorsport playing on SpeedVision - Mr. ///M3 22:11 5/25/2001 (0)
Drove a 993 4S today - eugene lou 22:04 5/25/2001 (1)
- Re: Drove a 993 4S today - gazoline 21:17 5/27/2001 (0)
Check out my Tail Lights!!! (pic) - blu3m3 21:53 5/25/2001 (4)
- Re:How did you do that? - acm396 17:32 5/26/2001 (1)
  - Re:How did you do that? - blu3m3 21:37 5/26/2001 (0)
- I did that 3 years ago on my old 92 325is. - madsedan 00:48 5/26/2001 (0)
- and why are you all excited? nm - marwan 23:14 5/25/2001 (0)
ECIS installation question...????????????????????? (url) (pic) - marwan 21:34 5/25/2001 (11)
- Mines the same too (more) - Hyperknight 13:08 5/26/2001 (1)
  - Re: Mines the same too (more) - marwan 14:03 5/26/2001 (0)
- Actually, just pop the rubber bumper off.... - Luxo M3 11:25 5/26/2001 (0)
- don't worry:) - m3power 11:20 5/26/2001 (1)
  - Re: don't worry:) - marwan 12:42 5/26/2001 (0)
- I don't know the detail surrounding this but (m) - Norm 11:11 5/26/2001 (0)
- I had the same problem: - ///ArmanI 10:52 5/26/2001 (0)
- Position it as best you can. Mine is. - Dakar 22:12 5/25/2001 (3)
  - Yours is what? same position? nm - marwan 22:16 5/25/2001 (2)
    - Sorry, mine looks like your pic.... - Dakar 22:18 5/25/2001 (0)
    - Sorry, mine looks like your pic.... - Dakar 22:18 5/25/2001 (0)
Need help regarding a mechanic in NY/CT area... - Silver///M3 21:30 5/25/2001 (0)
Anyone ever do any serious racing? (nt) - ez-money 20:26 5/25/2001 (2)
- Re: Anyone ever do any serious racing? - Stephen 11:55 5/26/2001 (0)
- Re: Anyone ever do any serious racing? - dave 21:30 5/25/2001 (0)
eat a beaver, save a tree. (nt) - ez-money 20:24 5/25/2001 (0)
lOOking to purchase a m3 - Joseph 20:15 5/25/2001 (1)
- '98 Estoril Blau M3 Cpe. 27k miles $28k - Mel A 20:26 5/25/2001 (0)
Well guys Im out....so everyone have a nice.... - Johnny 5 19:02 5/25/2001 (0)
wheels and tranny - khoa 18:45 5/25/2001 (0)
Final reminder for Dulles Meet - May 26 11am VA (url) (pic) - Dado 18:43 5/25/2001 (0)
E36 are Outdated.. theres no upside to them. (nt) - BimmerMan3 18:25 5/25/2001 (6)
- ya think? - ez-money 20:19 5/25/2001 (0)
- And, so are E30's E28's E34's etc. your point? (nt) - frayed 19:59 5/25/2001 (0)
- Why are all these morons on here? - Carl 18:37 5/25/2001 (1)
  - Smells like a contest... - JIM3 19:32 5/25/2001 (0)
- Same logic applies to you - troll. (nt) - Norm 18:35 5/25/2001 (0)
- Dumbest Comment Ever - VrooMPoweR 18:25 5/25/2001 (0)
POLL: best amp? Mcintosh?PPI?PhoenixGold? - SACHS'///M3 18:24 5/25/2001 (9)
- What happend to Rockford? Looks like crap now. - ZV 08:28 5/26/2001 (1)
  - Rockford is not what it use to be after they were - aus 13:04 5/26/2001 (0)
- Brax is HIGHLY regarded as are Xtant, a/d/s, Zapco (nt) - aus 21:57 5/25/2001 (3)
  - xtant is good, i own one, same as ppi - rockstar 04:32 5/26/2001 (2)
    - but Xtant has expansion modules for EQ, X-over, - aus 13:08 5/26/2001 (1)
      - true, the guy who started ppi started xtant - rockstar 17:15 5/26/2001 (0)