In Reply to: Re: Factory Fog Lights posted by FWK-Z3 on November 06, 2000 at 21:06:42:
Remove the cover to the inboard side of the foglight. It should pop out if oyu inser a slotted screwdriver along the gap between the cover and the foglamp lens and pry gently.
There is only a vertical adjustment. The pattern is very broad and flat with nothing to distinguish a center,; hence no lateral adjustment.
The vertical adjustment is by means of a philips screw located on the inboard side of the light unit about halfway up. I believe you twist it in (clockwise) t oraise the light and counterclockwise to lower it.
Thank you very much.