|
Koni double adjustable strut/shock set for 2.5/2.8/3.0 Z3 models. Custom conversion and valving by Koni North America. Rebuilt with all new seals mid-year. Includes required modified upper rear shock mounts to accomodate larger diameter shaft. Also includes custom conversion bracket on front struts to allow using longer M-style front swaybar endlink for better handling and hook-up exiting corners. Front end links mount up to strut rather than down control arm for better control and effectiveness. M-style end link is ~3x longer than non-M style end link for better geometry and less binding under full corner loading. Includes Ground Control M-style adjustable heim-joint front end links. Everything bolts right into a 2.5/2.8/3.0 Z3 without any mods on your part. Everything is SCCA Stock class legal. Soft settings softer than stock, stiff settings much stiffer than stock, plus enhanced low speed valving for incredible response reactions. An absolute must for max-performance handling.
New replacement value is $1600+ for everything listed above, providing that you can even get them made as described above.
$900/firm,
Will include Dinan 27mm adjustable front swaybar +$100.
Mark Sipe
TeamZ3@aol.com
© 1997 -
2008
Jump Internet Inc. All rights reserved.
