In Reply to: Cool! Was just thinking about those... posted by Scott on August 01, 2001 at 20:24:51:
Yes, I installed them. You drill 5 holes per side, using the splitter as a guide. There are metal anchors that are inserted into the holes, then the splitter bolts on. The bolts are in recessed holes on the underneath side of the splitter. See response below for price etc.
The only other thing you have to take care of is they might not fit to your bumper perfectly. On the set I had, one side fit OK but the other required some sanding along the contact edge in order to fit snugly. You do the fitting first, then drill holes, then get them painted, and bolt them on.
I already had the AC Schnitzer roof spoiler and decided to stick with their splitters so they would match.